A value that indicates capabilities that are
present in the node. If 'holdAvailable' is
present, this indicates support of the optional
Hold Function (refer to ANSI SMT 9.4.3.2). If
'CF-Wrap-AB' is present, this indicates that the
WRAP_AB state is forced.
The value is a sum. This value initially takes
the value zero, then for each of the configuration
policies currently enforced on the node, 2 raised
to a power is added to the sum. The powers are
according to the following table:
Policy Power
holdAvailable 0
CF-Wrap-AB 1
snmpFddiSMTConfigCapabilities OBJECT-TYPE
SYNTAX INTEGER (0..3)
ACCESS read-only
STATUS mandatory
DESCRIPTION
"A value that indicates capabilities that are
present in the node. If holdAvailable is
present, this indicates support of the optional
Hold Function (refer to ANSI SMT 9.4.3.2). If
CF-Wrap-AB is present, this indicates that the
WRAP_AB state is forced.
The value is a sum. This value initially takes
the value zero, then for each of the configuration
policies currently enforced on the node, 2 raised
to a power is added to the sum. The powers are
according to the following table:
Policy Power
holdAvailable 0
CF-Wrap-AB 1 "
REFERENCE
"ANSI { fddiSMT 25 }"
View at oid-info.com
A value that indicates capabilities that are
present in the node. If 'holdAvailable' is
present, this indicates support of the optional
Hold Function (refer to ANSI SMT 9.4.3.2). If
'CF-Wrap-AB' is present, this indicates that the
WRAP_AB state is forced.
The value is a sum. This value initially takes
the value zero, then for each of the configuration
policies currently enforced on the node, 2 raised
to a power is added to the sum. The powers are
according to the following table:
Policy Power
holdAvailable 0
CF-Wrap-AB 1
Parsed from file ph3-fddi.mib.txt
Company: None
Module: RFC1285-MIB
A value that indicates capabilities that are
present in the node. If 'holdAvailable' is
present, this indicates support of the optional
Hold Function (refer to ANSI SMT 9.4.3.2). If
'CF-Wrap-AB' is present, this indicates that the
WRAP_AB state is forced.
The value is a sum. This value initially takes
the value zero, then for each of the configuration
policies currently enforced on the node, 2 raised
to a power is added to the sum. The powers are
according to the following table:
Policy Power
holdAvailable 0
CF-Wrap-AB 1
Parsed from file RFC1285-MIB.mib
Module: RFC1285-MIB
snmpFddiSMTConfigCapabilities OBJECT-TYPE SYNTAX INTEGER (0..3) ACCESS read-only STATUS mandatory DESCRIPTION "A value that indicates capabilities that are present in the node. If 'holdAvailable' is present, this indicates support of the optional Hold Function (refer to ANSI SMT 9.4.3.2). If 'CF-Wrap-AB' is present, this indicates that the WRAP_AB state is forced. The value is a sum. This value initially takes the value zero, then for each of the configuration policies currently enforced on the node, 2 raised to a power is added to the sum. The powers are according to the following table: Policy Power holdAvailable 0 CF-Wrap-AB 1 " REFERENCE "ANSI { fddiSMT 25 }" ::= { snmpFddiSMTEntry 10 }
Automatically extracted from RFC1285
snmpFddiSMTConfigCapabilities OBJECT-TYPE SYNTAX INTEGER (0..3) ACCESS read-only STATUS mandatory DESCRIPTION "A value that indicates capabilities that are present in the node. If 'holdAvailable' is present, this indicates support of the optional Hold Function (refer to ANSI SMT 9.4.3.2). If 'CF-Wrap-AB' is present, this indicates that the WRAP_AB state is forced. The value is a sum. This value initially takes the value zero, then for each of the configuration policies currently enforced on the node, 2 raised to a power is added to the sum. The powers are according to the following table: Policy Power holdAvailable 0 CF-Wrap-AB 1 " REFERENCE "ANSI { fddiSMT 25 }" ::= { snmpFddiSMTEntry 10 }
snmpFddiSMTConfigCapabilities OBJECT-TYPE SYNTAX INTEGER (0..3) ACCESS read-only STATUS mandatory DESCRIPTION "A value that indicates capabilities that are present in the node. If 'holdAvailable' is present, this indicates support of the optional Hold Function (refer to ANSI SMT 9.4.3.2). If 'CF-Wrap-AB' is present, this indicates that the WRAP_AB state is forced. The value is a sum. This value initially takes the value zero, then for each of the configuration policies currently enforced on the node, 2 raised to a power is added to the sum. The powers are according to the following table: Policy Power holdAvailable 0 CF-Wrap-AB 1 " REFERENCE "ANSI { fddiSMT 25 }" ::= { snmpFddiSMTEntry 10 }
Internet Assigned Numbers Authority
OID | Name | Sub children | Sub Nodes Total | Description |
---|---|---|---|---|
1.3.6.1.2.1.10.15.1.2.1.1 | snmpFddiSMTIndex | 0 | 0 | A unique value for each SMT. Its value ranges between 1 and the value of snmpFddiSMTNumber. The value for each SMT must remain … |
1.3.6.1.2.1.10.15.1.2.1.2 | snmpFddiSMTStationId | 0 | 0 | Uniquely identifies an FDDI station. |
1.3.6.1.2.1.10.15.1.2.1.3 | snmpFddiSMTOpVersionId | 0 | 0 | The version that this station is using for its operation (refer to ANSI 7.1.2.2). |
1.3.6.1.2.1.10.15.1.2.1.4 | snmpFddiSMTHiVersionId | 0 | 0 | The highest version of SMT that this station supports (refer to ANSI 7.1.2.2). |
1.3.6.1.2.1.10.15.1.2.1.5 | snmpFddiSMTLoVersionId | 0 | 0 | The lowest version of SMT that this station supports (refer to ANSI 7.1.2.2). |
1.3.6.1.2.1.10.15.1.2.1.6 | snmpFddiSMTMACCt | 0 | 0 | The number of MACs in the station or concentrator. |
1.3.6.1.2.1.10.15.1.2.1.7 | snmpFddiSMTNonMasterCt | 0 | 0 | The number of Non Master PORTs (A, B, or S PORTs) in the station or concentrator. |
1.3.6.1.2.1.10.15.1.2.1.8 | snmpFddiSMTMasterCt | 0 | 0 | The number of Master PORTs in a node. If the node is not a concentrator, the value is zero. |
1.3.6.1.2.1.10.15.1.2.1.9 | snmpFddiSMTPathsAvailable | 0 | 0 | A value that indicates the PATH types available in the station. The value is a sum. This value initially takes the value zero, th… |
1.3.6.1.2.1.10.15.1.2.1.11 | snmpFddiSMTConfigPolicy | 0 | 0 | A value that indicates the configuration policies currently enforced in the node (refer to ANSI SMT 9.4.3.2). The 'configuration… |
1.3.6.1.2.1.10.15.1.2.1.12 | snmpFddiSMTConnectionPolicy | 0 | 0 | A value that indicates the connection policies enforced at the station. A station sets the corresponding policy for each of the … |
1.3.6.1.2.1.10.15.1.2.1.13 | snmpFddiSMTTNotify | 0 | 0 | The timer used in the Neighbor Notification protocol, reported in seconds and ranging from 2 to 30 seconds (refer to ANSI SMT 8.3… |
1.3.6.1.2.1.10.15.1.2.1.14 | snmpFddiSMTStatusReporting | 0 | 0 | Indicates whether the node implements the Status Reporting Protocol. This object is included for compatibility with products tha… |
1.3.6.1.2.1.10.15.1.2.1.15 | snmpFddiSMTECMState | 0 | 0 | Indicates the current state of the ECM state machine (refer to ANSI SMT 9.5.2). |
1.3.6.1.2.1.10.15.1.2.1.16 | snmpFddiSMTCFState | 0 | 0 | The attachment configuration for the station or concentrator (refer to ANSI SMT 9.7.4.3). |
1.3.6.1.2.1.10.15.1.2.1.17 | snmpFddiSMTHoldState | 0 | 0 | This value indicates the current state of the Hold function. The values are determined as follows: 'holding-prm' is set if the … |
1.3.6.1.2.1.10.15.1.2.1.18 | snmpFddiSMTRemoteDisconnectFlag | 0 | 0 | A flag indicating that the station was remotely disconnected from the network. A station requires a Connect Action (SM_CM_CONNEC… |
1.3.6.1.2.1.10.15.1.2.1.19 | snmpFddiSMTStationAction | 0 | 0 | This object, when read, always returns a value of other(1). The behavior of setting this variable to each of the acceptable valu… |