This object, when read, always returns a value of
other(1). The behavior of setting this variable
to each of the acceptable values is as follows:
Other: Results in a badValue error.
Connect: Generates an
SM_CM_Connect.request(connect) signal to CMT
indicating that the ECM State machine is to begin
a connection sequence. The
fddiSMTRemoteDisconnectFlag is cleared on the
setting of this variable to 1. See ANSI Ref
9.3.1.1.
Disconnect: Generates an
SM_CM_Connect.request(disconnect) signal to ECM
and sets the fddiSMTRemoteDisconnectFlag. See
ANSI Ref 9.3.1.1.
Path-Test: Initiates a station path test.
The Path_Test variable (See ANSI Ref. 9.4.1) is
set to Testing. The results of this action are
not specified in this standard.
Self-Test: Initiates a station self test.
The results of this action are not specified in
this standard.
Attempts to set this object to all other values
results in a badValue error. Agents may elect to
return a badValue error on attempts to set this
variable to path-Test(4) or self-Test(5).
snmpFddiSMTStationAction OBJECT-TYPE
SYNTAX INTEGER {
other(1), -- none of the following
connect(2),
disconnect(3),
path-Test(4),
self-Test(5)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION
"This object, when read, always returns a value of
other(1). The behavior of setting this variable
to each of the acceptable values is as follows:
Other: Results in a badValue error.
Connect: Generates an
SM_CM_Connect.request(connect) signal to CMT
indicating that the ECM State machine is to begin
a connection sequence. The
fddiSMTRemoteDisconnectFlag is cleared on the
setting of this variable to 1. See ANSI Ref
9.3.1.1.
Disconnect: Generates an
SM_CM_Connect.request(disconnect) signal to ECM
and sets the fddiSMTRemoteDisconnectFlag. See
ANSI Ref 9.3.1.1.
Path-Test: Initiates a station path test.
The Path_Test variable (See ANSI Ref. 9.4.1) is
set to Testing. The results of this action are
not specified in this standard.
Self-Test: Initiates a station self test.
The results of this action are not specified in
this standard.
Attempts to set this object to all other values
results in a badValue error. Agents may elect to
return a badValue error on attempts to set this
variable to path-Test(4) or self-Test(5)."
REFERENCE
"ANSI { fddiSMT 60 }"
View at oid-info.com
This object, when read, always returns a value of
other(1). The behavior of setting this variable
to each of the acceptable values is as follows:
Other: Results in a badValue error.
Connect: Generates an
SM_CM_Connect.request(connect) signal to CMT
indicating that the ECM State machine is to begin
a connection sequence. The
fddiSMTRemoteDisconnectFlag is cleared on the
setting of this variable to 1. See ANSI Ref
9.3.1.1.
Disconnect: Generates an
SM_CM_Connect.request(disconnect) signal to ECM
and sets the fddiSMTRemoteDisconnectFlag. See
ANSI Ref 9.3.1.1.
Path-Test: Initiates a station path test.
The Path_Test variable (See ANSI Ref. 9.4.1) is
set to Testing. The results of this action are
not specified in this standard.
Self-Test: Initiates a station self test.
The results of this action are not specified in
this standard.
Attempts to set this object to all other values
results in a badValue error. Agents may elect to
return a badValue error on attempts to set this
variable to path-Test(4) or self-Test(5).
Parsed from file ph3-fddi.mib.txt
Company: None
Module: RFC1285-MIB
This object, when read, always returns a value of
other(1). The behavior of setting this variable
to each of the acceptable values is as follows:
Other: Results in a badValue error.
Connect: Generates an
SM_CM_Connect.request(connect) signal to CMT
indicating that the ECM State machine is to begin
a connection sequence. The
fddiSMTRemoteDisconnectFlag is cleared on the
setting of this variable to 1. See ANSI Ref
9.3.1.1.
Disconnect: Generates an
SM_CM_Connect.request(disconnect) signal to ECM
and sets the fddiSMTRemoteDisconnectFlag. See
ANSI Ref 9.3.1.1.
Path-Test: Initiates a station path test.
The Path_Test variable (See ANSI Ref. 9.4.1) is
set to Testing. The results of this action are
not specified in this standard.
Self-Test: Initiates a station self test.
The results of this action are not specified in
this standard.
Attempts to set this object to all other values
results in a badValue error. Agents may elect to
return a badValue error on attempts to set this
variable to path-Test(4) or self-Test(5).
Parsed from file RFC1285-MIB.mib
Module: RFC1285-MIB
snmpFddiSMTStationAction OBJECT-TYPE SYNTAX INTEGER { other(1), connect(2), disconnect(3), path-Test(4), self-Test(5) } ACCESS read-write STATUS mandatory DESCRIPTION "This object, when read, always returns a value of other(1). The behavior of setting this variable to each of the acceptable values is as follows: Other: Results in a badValue error. Connect: Generates an SM_CM_Connect.request(connect) signal to CMT indicating that the ECM State machine is to begin a connection sequence. The fddiSMTRemoteDisconnectFlag is cleared on the setting of this variable to 1. See ANSI Ref 9.3.1.1. Disconnect: Generates an SM_CM_Connect.request(disconnect) signal to ECM and sets the fddiSMTRemoteDisconnectFlag. See ANSI Ref 9.3.1.1. Path-Test: Initiates a station path test. The Path_Test variable (See ANSI Ref. 9.4.1) is set to Testing. The results of this action are not specified in this standard. Self-Test: Initiates a station self test. The results of this action are not specified in this standard. Attempts to set this object to all other values results in a badValue error. Agents may elect to return a badValue error on attempts to set this variable to path-Test(4) or self-Test(5)." REFERENCE "ANSI { fddiSMT 60 }" ::= { snmpFddiSMTEntry 19 }
Automatically extracted from RFC1285
snmpFddiSMTStationAction OBJECT-TYPE SYNTAX INTEGER { other(1), connect(2), disconnect(3), path-Test(4), self-Test(5) } ACCESS read-write STATUS mandatory DESCRIPTION "This object, when read, always returns a value of other(1). The behavior of setting this variable to each of the acceptable values is as follows: Other: Results in a badValue error. Connect: Generates an SM_CM_Connect.request(connect) signal to CMT indicating that the ECM State machine is to begin a connection sequence. The fddiSMTRemoteDisconnectFlag is cleared on the setting of this variable to 1. See ANSI Ref 9.3.1.1. Disconnect: Generates an SM_CM_Connect.request(disconnect) signal to ECM and sets the fddiSMTRemoteDisconnectFlag. See ANSI Ref 9.3.1.1. Path-Test: Initiates a station path test. The Path_Test variable (See ANSI Ref. 9.4.1) is set to Testing. The results of this action are not specified in this standard. Self-Test: Initiates a station self test. The results of this action are not specified in this standard. Attempts to set this object to all other values results in a badValue error. Agents may elect to return a badValue error on attempts to set this variable to path-Test(4) or self-Test(5)." REFERENCE "ANSI { fddiSMT 60 }" ::= { snmpFddiSMTEntry 19 }
snmpFddiSMTStationAction OBJECT-TYPE SYNTAX INTEGER { other(1), connect(2), disconnect(3), path-Test(4), self-Test(5) } ACCESS read-write STATUS mandatory DESCRIPTION "This object, when read, always returns a value of other(1). The behavior of setting this variable to each of the acceptable values is as follows: Other: Results in a badValue error. Connect: Generates an SM_CM_Connect.request(connect) signal to CMT indicating that the ECM State machine is to begin a connection sequence. The fddiSMTRemoteDisconnectFlag is cleared on the setting of this variable to 1. See ANSI Ref 9.3.1.1. Disconnect: Generates an SM_CM_Connect.request(disconnect) signal to ECM and sets the fddiSMTRemoteDisconnectFlag. See ANSI Ref 9.3.1.1. Path-Test: Initiates a station path test. The Path_Test variable (See ANSI Ref. 9.4.1) is set to Testing. The results of this action are not specified in this standard. Self-Test: Initiates a station self test. The results of this action are not specified in this standard. Attempts to set this object to all other values results in a badValue error. Agents may elect to return a badValue error on attempts to set this variable to path-Test(4) or self-Test(5)." REFERENCE "ANSI { fddiSMT 60 }" ::= { snmpFddiSMTEntry 19 }
Internet Assigned Numbers Authority
| OID | Name | Sub children | Sub Nodes Total | Description |
|---|---|---|---|---|
| 1.3.6.1.2.1.10.15.1.2.1.1 | snmpFddiSMTIndex | 0 | 0 | A unique value for each SMT. Its value ranges between 1 and the value of snmpFddiSMTNumber. The value for each SMT must remain … |
| 1.3.6.1.2.1.10.15.1.2.1.2 | snmpFddiSMTStationId | 0 | 0 | Uniquely identifies an FDDI station. |
| 1.3.6.1.2.1.10.15.1.2.1.3 | snmpFddiSMTOpVersionId | 0 | 0 | The version that this station is using for its operation (refer to ANSI 7.1.2.2). |
| 1.3.6.1.2.1.10.15.1.2.1.4 | snmpFddiSMTHiVersionId | 0 | 0 | The highest version of SMT that this station supports (refer to ANSI 7.1.2.2). |
| 1.3.6.1.2.1.10.15.1.2.1.5 | snmpFddiSMTLoVersionId | 0 | 0 | The lowest version of SMT that this station supports (refer to ANSI 7.1.2.2). |
| 1.3.6.1.2.1.10.15.1.2.1.6 | snmpFddiSMTMACCt | 0 | 0 | The number of MACs in the station or concentrator. |
| 1.3.6.1.2.1.10.15.1.2.1.7 | snmpFddiSMTNonMasterCt | 0 | 0 | The number of Non Master PORTs (A, B, or S PORTs) in the station or concentrator. |
| 1.3.6.1.2.1.10.15.1.2.1.8 | snmpFddiSMTMasterCt | 0 | 0 | The number of Master PORTs in a node. If the node is not a concentrator, the value is zero. |
| 1.3.6.1.2.1.10.15.1.2.1.9 | snmpFddiSMTPathsAvailable | 0 | 0 | A value that indicates the PATH types available in the station. The value is a sum. This value initially takes the value zero, th… |
| 1.3.6.1.2.1.10.15.1.2.1.10 | snmpFddiSMTConfigCapabilities | 0 | 0 | A value that indicates capabilities that are present in the node. If 'holdAvailable' is present, this indicates support of the o… |
| 1.3.6.1.2.1.10.15.1.2.1.11 | snmpFddiSMTConfigPolicy | 0 | 0 | A value that indicates the configuration policies currently enforced in the node (refer to ANSI SMT 9.4.3.2). The 'configuration… |
| 1.3.6.1.2.1.10.15.1.2.1.12 | snmpFddiSMTConnectionPolicy | 0 | 0 | A value that indicates the connection policies enforced at the station. A station sets the corresponding policy for each of the … |
| 1.3.6.1.2.1.10.15.1.2.1.13 | snmpFddiSMTTNotify | 0 | 0 | The timer used in the Neighbor Notification protocol, reported in seconds and ranging from 2 to 30 seconds (refer to ANSI SMT 8.3… |
| 1.3.6.1.2.1.10.15.1.2.1.14 | snmpFddiSMTStatusReporting | 0 | 0 | Indicates whether the node implements the Status Reporting Protocol. This object is included for compatibility with products tha… |
| 1.3.6.1.2.1.10.15.1.2.1.15 | snmpFddiSMTECMState | 0 | 0 | Indicates the current state of the ECM state machine (refer to ANSI SMT 9.5.2). |
| 1.3.6.1.2.1.10.15.1.2.1.16 | snmpFddiSMTCFState | 0 | 0 | The attachment configuration for the station or concentrator (refer to ANSI SMT 9.7.4.3). |
| 1.3.6.1.2.1.10.15.1.2.1.17 | snmpFddiSMTHoldState | 0 | 0 | This value indicates the current state of the Hold function. The values are determined as follows: 'holding-prm' is set if the … |
| 1.3.6.1.2.1.10.15.1.2.1.18 | snmpFddiSMTRemoteDisconnectFlag | 0 | 0 | A flag indicating that the station was remotely disconnected from the network. A station requires a Connect Action (SM_CM_CONNEC… |