lmpGlobalLinkVerificationInterval OBJECT-TYPE
SYNTAX Unsigned32
UNITS "milliseconds"
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object indicates how often the link verification
procedure is executed. The interval is in milliseconds.
A value of 0 is used to indicate that the link
verification procedure should not be executed. The
interval specified in this object should be large enough
to allow the verification procedure to be completed
before the start of the next interval.
Implementations should save the value of this object in
persistent memory so that it survives restarts or reboot."
View at oid-info.com
This object indicates how often the link verification
procedure is executed. The interval is in milliseconds.
A value of 0 is used to indicate that the link
verification procedure should not be executed. The
interval specified in this object should be large enough
to allow the verification procedure to be completed
before the start of the next interval.
Implementations should save the value of this object in
persistent memory so that it survives restarts or reboot.
Parsed from file LMP-MIB.mib
Module: LMP-MIB
Automatically extracted from RFC4327
lmpGlobalLinkVerificationInterval OBJECT-TYPE SYNTAX Unsigned32 UNITS "milliseconds" MAX-ACCESS read-write STATUS current DESCRIPTION "This object indicates how often the link verification procedure is executed. The interval is in milliseconds. A value of 0 is used to indicate that the link verification procedure should not be executed. The interval specified in this object should be large enough to allow the verification procedure to be completed before the start of the next interval. Implementations should save the value of this object in persistent memory so that it survives restarts or reboot." ::= { lmpObjects 13 }
Internet Assigned Numbers Authority
OID | Name | Sub children | Sub Nodes Total | Description |
---|---|---|---|---|
1.3.6.1.2.1.10.227.1.13.0 | lmpGlobalLinkVerificationInterval | 0 | 0 | None |
OID | Name | Sub children | Sub Nodes Total | Description |
---|---|---|---|---|
1.3.6.1.2.1.10.227.1.1 | lmpAdminStatus | 1 | 1 | The desired operational status of LMP on the node. Implementations should save the value of this object in persistent memory so t… |
1.3.6.1.2.1.10.227.1.2 | lmpOperStatus | 1 | 1 | The actual operational status of LMP on the node. |
1.3.6.1.2.1.10.227.1.3 | lmpNbrTable | 1 | 9 | This table specifies the neighbor node(s) to which control channels may be established. |
1.3.6.1.2.1.10.227.1.4 | lmpCcHelloIntervalDefault | 1 | 1 | This object specifies the default value for the HelloInterval parameter used in the Hello protocol keep-alive phase. It indicate… |
1.3.6.1.2.1.10.227.1.5 | lmpCcHelloIntervalDefaultMin | 1 | 1 | This object specifies the default minimum value for the HelloInterval parameter. It is used as a default value for lmpCcHelloInt… |
1.3.6.1.2.1.10.227.1.6 | lmpCcHelloIntervalDefaultMax | 1 | 1 | This object specifies the default maximum value for the HelloInterval parameter. It is used as a default value for lmpCcHelloInt… |
1.3.6.1.2.1.10.227.1.7 | lmpCcHelloDeadIntervalDefault | 1 | 1 | This object specifies the default HelloDeadInterval parameter to use in the Hello protocol keep-alive phase. It indicates how lo… |
1.3.6.1.2.1.10.227.1.8 | lmpCcHelloDeadIntervalDefaultMin | 1 | 1 | This object specifies the default minimum value for the HelloDeadInterval parameter. It is used as a default value for lmpCcHell… |
1.3.6.1.2.1.10.227.1.9 | lmpCcHelloDeadIntervalDefaultMax | 1 | 1 | This object specifies the default maximum value for the HelloDeadInterval parameter. It is used as a default value for lmpCcHell… |
1.3.6.1.2.1.10.227.1.10 | lmpControlChannelTable | 1 | 23 | This table specifies LMP control channel information. |
1.3.6.1.2.1.10.227.1.11 | lmpControlChannelPerfTable | 1 | 54 | This table specifies LMP control channel performance counters. |
1.3.6.1.2.1.10.227.1.12 | lmpTeLinkTable | 1 | 8 | This table specifies the LMP-specific TE link information. Overall TE link information is kept in three separate tables: ifTable … |
1.3.6.1.2.1.10.227.1.14 | lmpLinkVerificationTable | 1 | 9 | This table specifies TE link information associated with the LMP verification procedure. |
1.3.6.1.2.1.10.227.1.15 | lmpTeLinkPerfTable | 1 | 41 | This table specifies LMP TE link performance counters. |
1.3.6.1.2.1.10.227.1.16 | lmpDataLinkTable | 1 | 11 | This table specifies the data-bearing links managed by the LMP. |
1.3.6.1.2.1.10.227.1.17 | lmpDataLinkPerfTable | 1 | 8 | This table specifies the data-bearing links LMP performance counters. |
1.3.6.1.2.1.10.227.1.18 | lmpNotificationMaxRate | 1 | 1 | The LMP notification rate depends on the size of the network, the type of links, the network configuration, the reliability of th… |
1.3.6.1.2.1.10.227.1.19 | lmpLinkPropertyNotificationsEnabled | 1 | 1 | If this object is true(1), then it enables the generation of lmpTeLinkPropertyMismatch and lmpDataLinkPropertyMismatch notificati… |
1.3.6.1.2.1.10.227.1.20 | lmpUnprotectedNotificationsEnabled | 1 | 1 | If this object is true(1), then it enables the generation of lmpUnprotected notifications; otherwise, these notifications are not… |
1.3.6.1.2.1.10.227.1.21 | lmpCcUpDownNotificationsEnabled | 1 | 1 | If this object is true(1), then it enables the generation of lmpControlChannelUp and lmpControlChannelDown notifications; otherwi… |
1.3.6.1.2.1.10.227.1.22 | lmpTeLinkNotificationsEnabled | 1 | 1 | If this object is true(1), then it enables the generation of lmpTeLinkDegraded and lmpTeLinkNotDegraded notifications; otherwise,… |
1.3.6.1.2.1.10.227.1.23 | lmpDataLinkNotificationsEnabled | 1 | 1 | If this object is true(1), then it enables the generation of lmpDataLinkVerificationFailure notification; otherwise, these notifi… |