Minimum Impulse Noise Protection on Upstream direction. The
minimum impulse noise protection for the bearer channel,
expressed in symbols. The parameter can take the following
values: noProtection (i.e., INP not required), halfSymbol
(i.e., INP length is 1/2 symbol), and 1-16 symbols in steps
of 1 symbol.
adsl2ChConfProfMinProtectionUs OBJECT-TYPE
SYNTAX Adsl2SymbolProtection
UNITS "symbols"
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Minimum Impulse Noise Protection on Upstream direction. The
minimum impulse noise protection for the bearer channel,
expressed in symbols. The parameter can take the following
values: noProtection (i.e., INP not required), halfSymbol
(i.e., INP length is 1/2 symbol), and 1-16 symbols in steps
of 1 symbol."
REFERENCE "ITU-T G.997.1, paragraph 7.3.2.3"
DEFVAL { noProtection }
View at oid-info.com
Minimum Impulse Noise Protection on Upstream direction. The
minimum impulse noise protection for the bearer channel,
expressed in symbols. The parameter can take the following
values: noProtection (i.e., INP not required), halfSymbol
(i.e., INP length is 1/2 symbol), and 1-16 symbols in steps
of 1 symbol.
Parsed from file rfc4706-ADSL2.mib-2.txt
Company: None
Module: ADSL2-LINE-MIB
Minimum Impulse Noise Protection on Upstream direction. The
minimum impulse noise protection for the bearer channel,
expressed in symbols. The parameter can take the following
values: noProtection (i.e., INP not required), halfSymbol
(i.e., INP length is 1/2 symbol), and 1-16 symbols in steps
of 1 symbol.
adsl2ChConfProfMinProtectionUs OBJECT-TYPE SYNTAX Adsl2SymbolProtection ACCESS read-write STATUS mandatory DESCRIPTION "Minimum Impulse Noise Protection on Upstream direction. The minimum impulse noise protection for the bearer channel, expressed in symbols. The parameter can take the following values: noProtection (i.e., INP not required), halfSymbol (i.e., INP length is 1/2 symbol), and 1-16 symbols in steps of 1 symbol." REFERENCE "ITU-T G.997.1, paragraph 7.3.2.3" DEFVAL { noProtection } ::= { adsl2ChConfProfileEntry 12 }
Automatically extracted from RFC4706
adsl2ChConfProfMinProtectionUs OBJECT-TYPE SYNTAX Adsl2SymbolProtection UNITS "symbols" MAX-ACCESS read-create STATUS current DESCRIPTION "Minimum Impulse Noise Protection on Upstream direction. The minimum impulse noise protection for the bearer channel, expressed in symbols. The parameter can take the following values: noProtection (i.e., INP not required), halfSymbol (i.e., INP length is 1/2 symbol), and 1-16 symbols in steps of 1 symbol." REFERENCE "ITU-T G.997.1, paragraph 7.3.2.3" DEFVAL { noProtection } ::= { adsl2ChConfProfileEntry 12 }
adsl2ChConfProfMinProtectionUs OBJECT-TYPE SYNTAX Adsl2SymbolProtection UNITS "symbols" MAX-ACCESS read-create STATUS current DESCRIPTION "Minimum Impulse Noise Protection on Upstream direction. The minimum impulse noise protection for the bearer channel, expressed in symbols. The parameter can take the following values: noProtection (i.e., INP not required), halfSymbol (i.e., INP length is 1/2 symbol), and 1-16 symbols in steps of 1 symbol." REFERENCE "ITU-T G.997.1, paragraph 7.3.2.3" DEFVAL { noProtection } ::= { adsl2ChConfProfileEntry 12 }
Internet Assigned Numbers Authority
OID | Name | Sub children | Sub Nodes Total | Description |
---|---|---|---|---|
1.3.6.1.2.1.10.238.1.5.2.1.1.1 | adsl2ChConfProfProfileName | 0 | 0 | This object identifies a row in this table. |
1.3.6.1.2.1.10.238.1.5.2.1.1.2 | adsl2ChConfProfMinDataRateDs | 0 | 0 | Minimum Data Rate on Downstream direction. The minimum net data rate for the bearer channel, coded in bits/second. |
1.3.6.1.2.1.10.238.1.5.2.1.1.3 | adsl2ChConfProfMinDataRateUs | 0 | 0 | Minimum Data Rate on Upstream direction. The minimum net data rate for the bearer channel, coded in bits/second. |
1.3.6.1.2.1.10.238.1.5.2.1.1.4 | adsl2ChConfProfMinResDataRateDs | 0 | 0 | Minimum Reserved Data Rate on Downstream direction. The minimum reserved net data rate for the bearer channel, coded in bits/sec… |
1.3.6.1.2.1.10.238.1.5.2.1.1.5 | adsl2ChConfProfMinResDataRateUs | 0 | 0 | Minimum Reserved Data Rate on Upstream direction. The minimum reserved net data rate for the bearer channel, coded in bits/secon… |
1.3.6.1.2.1.10.238.1.5.2.1.1.6 | adsl2ChConfProfMaxDataRateDs | 0 | 0 | Maximum Data Rate on Downstream direction. The maximum net data rate for the bearer channel, coded in bits/second. |
1.3.6.1.2.1.10.238.1.5.2.1.1.7 | adsl2ChConfProfMaxDataRateUs | 0 | 0 | Maximum Data Rate on Upstream direction. The maximum net data rate for the bearer channel, coded in bits/second. |
1.3.6.1.2.1.10.238.1.5.2.1.1.8 | adsl2ChConfProfMinDataRateLowPwrDs | 0 | 0 | Minimum Data Rate in Low Power state on Downstream direction. The minimum net data rate for the bearer channel, coded in bits/sec… |
1.3.6.1.2.1.10.238.1.5.2.1.1.9 | adsl2ChConfProfMaxDelayDs | 0 | 0 | Maximum Interleave Delay on Downstream direction. The maximum one-way interleaving delay introduced by the PMS-TC on Downstream … |
1.3.6.1.2.1.10.238.1.5.2.1.1.10 | adsl2ChConfProfMaxDelayUs | 0 | 0 | Maximum Interleave Delay on Upstream direction. The maximum one-way interleaving delay introduced by the PMS-TC on Upstream dire… |
1.3.6.1.2.1.10.238.1.5.2.1.1.11 | adsl2ChConfProfMinProtectionDs | 0 | 0 | Minimum Impulse Noise Protection on Downstream direction. The minimum impulse noise protection for the bearer channel, expressed… |
1.3.6.1.2.1.10.238.1.5.2.1.1.13 | adsl2ChConfProfMaxBerDs | 0 | 0 | Maximum Bit Error Ratio on Downstream direction. The maximum bit error ratio for the bearer channel. The parameter can take the… |
1.3.6.1.2.1.10.238.1.5.2.1.1.14 | adsl2ChConfProfMaxBerUs | 0 | 0 | Maximum Bit Error Ratio on Upstream direction. The maximum bit error ratio for the bearer channel. The parameter can take the f… |
1.3.6.1.2.1.10.238.1.5.2.1.1.15 | adsl2ChConfProfUsDataRateDs | 0 | 0 | Data Rate Threshold Up shift for downstream direction. An 'Up-shift rate change' event is triggered when the actual downstream d… |
1.3.6.1.2.1.10.238.1.5.2.1.1.16 | adsl2ChConfProfDsDataRateDs | 0 | 0 | Data Rate Threshold Down-shift for downstream direction. A 'Down-shift rate change' event is triggered when the actual downstrea… |
1.3.6.1.2.1.10.238.1.5.2.1.1.17 | adsl2ChConfProfUsDataRateUs | 0 | 0 | Data Rate Threshold Up shift for upstream direction. An 'Up-shift rate change' event is triggered when the actual upstream data … |
1.3.6.1.2.1.10.238.1.5.2.1.1.18 | adsl2ChConfProfDsDataRateUs | 0 | 0 | Data Rate Threshold Down-shift for upstream direction. A 'Down-shift rate change' event is triggered when the actual upstream da… |
1.3.6.1.2.1.10.238.1.5.2.1.1.19 | adsl2ChConfProfImaEnabled | 0 | 0 | IMA Mode Enable. The parameter enables the IMA operation mode in the ATM Data Path. Relevant only if the channel is an ATM Data… |
1.3.6.1.2.1.10.238.1.5.2.1.1.20 | adsl2ChConfProfRowStatus | 0 | 0 | This object is used to create a new row or to modify or delete an existing row in this table. A profile is activated by setting t… |