IMA Mode Enable. The parameter enables the IMA operation mode
in the ATM Data Path. Relevant only if the channel is an ATM
Data Path. When in 'enable' state, the ATM data path should
comply with the requirements for IMA transmission.
adsl2ChConfProfImaEnabled OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"IMA Mode Enable. The parameter enables the IMA operation mode
in the ATM Data Path. Relevant only if the channel is an ATM
Data Path. When in \enable\ state, the ATM data path should
comply with the requirements for IMA transmission."
REFERENCE "ITU-T G.997.1, paragraph 7.3.4.1"
DEFVAL { false }
View at oid-info.com
IMA Mode Enable. The parameter enables the IMA operation mode
in the ATM Data Path. Relevant only if the channel is an ATM
Data Path. When in 'enable' state, the ATM data path should
comply with the requirements for IMA transmission.
Parsed from file rfc4706-ADSL2.mib-2.txt
Company: None
Module: ADSL2-LINE-MIB
IMA Mode Enable. The parameter enables the IMA operation mode
in the ATM Data Path. Relevant only if the channel is an ATM
Data Path. When in 'enable' state, the ATM data path should
comply with the requirements for IMA transmission.
adsl2ChConfProfImaEnabled OBJECT-TYPE SYNTAX TruthValue ACCESS read-write STATUS mandatory DESCRIPTION "IMA Mode Enable. The parameter enables the IMA operation mode in the ATM Data Path. Relevant only if the channel is an ATM Data Path. When in 'enable' state, the ATM data path should comply with the requirements for IMA transmission." REFERENCE "ITU-T G.997.1, paragraph 7.3.4.1" DEFVAL { false } ::= { adsl2ChConfProfileEntry 19 }
Automatically extracted from RFC4706
adsl2ChConfProfImaEnabled OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-create STATUS current DESCRIPTION "IMA Mode Enable. The parameter enables the IMA operation mode in the ATM Data Path. Relevant only if the channel is an ATM Data Path. When in 'enable' state, the ATM data path should comply with the requirements for IMA transmission." REFERENCE "ITU-T G.997.1, paragraph 7.3.4.1" DEFVAL { false } ::= { adsl2ChConfProfileEntry 19 }
adsl2ChConfProfImaEnabled OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-create STATUS current DESCRIPTION "IMA Mode Enable. The parameter enables the IMA operation mode in the ATM Data Path. Relevant only if the channel is an ATM Data Path. When in 'enable' state, the ATM data path should comply with the requirements for IMA transmission." REFERENCE "ITU-T G.997.1, paragraph 7.3.4.1" DEFVAL { false } ::= { adsl2ChConfProfileEntry 19 }
Internet Assigned Numbers Authority
OID | Name | Sub children | Sub Nodes Total | Description |
---|---|---|---|---|
1.3.6.1.2.1.10.238.1.5.2.1.1.1 | adsl2ChConfProfProfileName | 0 | 0 | This object identifies a row in this table. |
1.3.6.1.2.1.10.238.1.5.2.1.1.2 | adsl2ChConfProfMinDataRateDs | 0 | 0 | Minimum Data Rate on Downstream direction. The minimum net data rate for the bearer channel, coded in bits/second. |
1.3.6.1.2.1.10.238.1.5.2.1.1.3 | adsl2ChConfProfMinDataRateUs | 0 | 0 | Minimum Data Rate on Upstream direction. The minimum net data rate for the bearer channel, coded in bits/second. |
1.3.6.1.2.1.10.238.1.5.2.1.1.4 | adsl2ChConfProfMinResDataRateDs | 0 | 0 | Minimum Reserved Data Rate on Downstream direction. The minimum reserved net data rate for the bearer channel, coded in bits/sec… |
1.3.6.1.2.1.10.238.1.5.2.1.1.5 | adsl2ChConfProfMinResDataRateUs | 0 | 0 | Minimum Reserved Data Rate on Upstream direction. The minimum reserved net data rate for the bearer channel, coded in bits/secon… |
1.3.6.1.2.1.10.238.1.5.2.1.1.6 | adsl2ChConfProfMaxDataRateDs | 0 | 0 | Maximum Data Rate on Downstream direction. The maximum net data rate for the bearer channel, coded in bits/second. |
1.3.6.1.2.1.10.238.1.5.2.1.1.7 | adsl2ChConfProfMaxDataRateUs | 0 | 0 | Maximum Data Rate on Upstream direction. The maximum net data rate for the bearer channel, coded in bits/second. |
1.3.6.1.2.1.10.238.1.5.2.1.1.8 | adsl2ChConfProfMinDataRateLowPwrDs | 0 | 0 | Minimum Data Rate in Low Power state on Downstream direction. The minimum net data rate for the bearer channel, coded in bits/sec… |
1.3.6.1.2.1.10.238.1.5.2.1.1.9 | adsl2ChConfProfMaxDelayDs | 0 | 0 | Maximum Interleave Delay on Downstream direction. The maximum one-way interleaving delay introduced by the PMS-TC on Downstream … |
1.3.6.1.2.1.10.238.1.5.2.1.1.10 | adsl2ChConfProfMaxDelayUs | 0 | 0 | Maximum Interleave Delay on Upstream direction. The maximum one-way interleaving delay introduced by the PMS-TC on Upstream dire… |
1.3.6.1.2.1.10.238.1.5.2.1.1.11 | adsl2ChConfProfMinProtectionDs | 0 | 0 | Minimum Impulse Noise Protection on Downstream direction. The minimum impulse noise protection for the bearer channel, expressed… |
1.3.6.1.2.1.10.238.1.5.2.1.1.12 | adsl2ChConfProfMinProtectionUs | 0 | 0 | Minimum Impulse Noise Protection on Upstream direction. The minimum impulse noise protection for the bearer channel, expressed i… |
1.3.6.1.2.1.10.238.1.5.2.1.1.13 | adsl2ChConfProfMaxBerDs | 0 | 0 | Maximum Bit Error Ratio on Downstream direction. The maximum bit error ratio for the bearer channel. The parameter can take the… |
1.3.6.1.2.1.10.238.1.5.2.1.1.14 | adsl2ChConfProfMaxBerUs | 0 | 0 | Maximum Bit Error Ratio on Upstream direction. The maximum bit error ratio for the bearer channel. The parameter can take the f… |
1.3.6.1.2.1.10.238.1.5.2.1.1.15 | adsl2ChConfProfUsDataRateDs | 0 | 0 | Data Rate Threshold Up shift for downstream direction. An 'Up-shift rate change' event is triggered when the actual downstream d… |
1.3.6.1.2.1.10.238.1.5.2.1.1.16 | adsl2ChConfProfDsDataRateDs | 0 | 0 | Data Rate Threshold Down-shift for downstream direction. A 'Down-shift rate change' event is triggered when the actual downstrea… |
1.3.6.1.2.1.10.238.1.5.2.1.1.17 | adsl2ChConfProfUsDataRateUs | 0 | 0 | Data Rate Threshold Up shift for upstream direction. An 'Up-shift rate change' event is triggered when the actual upstream data … |
1.3.6.1.2.1.10.238.1.5.2.1.1.18 | adsl2ChConfProfDsDataRateUs | 0 | 0 | Data Rate Threshold Down-shift for upstream direction. A 'Down-shift rate change' event is triggered when the actual upstream da… |
1.3.6.1.2.1.10.238.1.5.2.1.1.20 | adsl2ChConfProfRowStatus | 0 | 0 | This object is used to create a new row or to modify or delete an existing row in this table. A profile is activated by setting t… |