The previous net data rate that the bearer channel was
operating at just before the latest rate change event. This
could be a full or short initialization, fast retrain, DRA or
power management transitions, excluding transitions between L0
state and L1 or L2 states. The data rate is coded in
bit/s.
Parsed from file VDSL2-LINE-MIB.mib
Module: VDSL2-LINE-MIB
The previous net data rate that the bearer channel was
operating at just before the latest rate change event. This
could be a full or short initialization, fast retrain, DRA or
power management transitions, excluding transitions between L0
state and L1 or L2 states. The data rate is coded in
bit/s.
xdsl2ChStatusPrevDataRate OBJECT-TYPE
SYNTAX Unsigned32
UNITS "bits/second"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The previous net data rate that the bearer channel was
operating at just before the latest rate change event. This
could be a full or short initialization, fast retrain, DRA or
power management transitions, excluding transitions between L0
state and L1 or L2 states. The data rate is coded in
bit/s."
REFERENCE "ITU-T G.997.1, paragraph #7.5.2.2
(Previous data rate)"
DEFVAL { 0 }
View at oid-info.com
The previous net data rate that the bearer channel was
operating at just before the latest rate change event. This
could be a full or short initialization, fast retrain, DRA or
power management transitions, excluding transitions between L0
state and L1 or L2 states. The data rate is coded in
bit/s.
Parsed from file VDSL2-LINE-MIB.my.txt
Company: None
Module: VDSL2-LINE-MIB
The previous net data rate that the bearer channel was
operating at just before the latest rate change event. This
could be a full or short initialization, fast retrain, DRA or
power management transitions, excluding transitions between L0
state and L1 or L2 states. The data rate is coded in
bit/s.
xdsl2ChStatusPrevDataRate OBJECT-TYPE SYNTAX Unsigned32 UNITS "bits/second" MAX-ACCESS read-only STATUS current DESCRIPTION "The previous net data rate that the bearer channel was operating at just before the latest rate change event. This could be a full or short initialization, fast retrain, DRA or power management transitions, excluding transitions between L0 state and L1 or L2 states. The data rate is coded in bit/s." REFERENCE "ITU-T G.997.1, paragraph #7.5.2.2 (Previous data rate)" DEFVAL { 0 } ::= { xdsl2ChannelStatusEntry 3 }
xdsl2ChStatusPrevDataRate OBJECT-TYPE SYNTAX Gauge ACCESS read-only STATUS mandatory DESCRIPTION "The previous net data rate that the bearer channel was operating at just before the latest rate change event. This could be a full or short initialization, fast retrain, DRA or power management transitions, excluding transitions between L0 state and L1 or L2 states. The data rate is coded in bit/s." REFERENCE "ITU-T G.997.1, paragraph #7.5.2.2 (Previous data rate)" DEFVAL { 0 } ::= { xdsl2ChannelStatusEntry 3 }
Automatically extracted from RFC5650
xdsl2ChStatusPrevDataRate OBJECT-TYPE SYNTAX Unsigned32 UNITS "bits/second" MAX-ACCESS read-only STATUS current DESCRIPTION "The previous net data rate that the bearer channel was operating at just before the latest rate change event. This could be a full or short initialization, fast retrain, DRA or power management transitions, excluding transitions between L0 state and L1 or L2 states. The data rate is coded in bit/s." REFERENCE "ITU-T G.997.1, paragraph #7.5.2.2 (Previous data rate)" DEFVAL { 0 } ::= { xdsl2ChannelStatusEntry 3 }
xdsl2ChStatusPrevDataRate OBJECT-TYPE SYNTAX Unsigned32 UNITS "bits/second" MAX-ACCESS read-only STATUS current DESCRIPTION "The previous net data rate that the bearer channel was operating at just before the latest rate change event. This could be a full or short initialization, fast retrain, DRA or power management transitions, excluding transitions between L0 state and L1 or L2 states. The data rate is coded in bit/s." REFERENCE "ITU-T G.997.1, paragraph #7.5.2.2 (Previous data rate)" DEFVAL { 0 } ::= { xdsl2ChannelStatusEntry 3 }
Internet Assigned Numbers Authority
OID | Name | Sub children | Sub Nodes Total | Description |
---|---|---|---|---|
1.3.6.1.2.1.10.251.1.2.2.1.1 | xdsl2ChStatusUnit | 0 | 0 | The termination unit. |
1.3.6.1.2.1.10.251.1.2.2.1.2 | xdsl2ChStatusActDataRate | 0 | 0 | The actual net data rate at which the bearer channel is operating, if in L0 power management state. In L1 or L2 states, it relat… |
1.3.6.1.2.1.10.251.1.2.2.1.4 | xdsl2ChStatusActDelay | 0 | 0 | The actual one-way interleaving delay introduced by the PMS-TC in the direction of the bearer channel, if in L0 power management … |
1.3.6.1.2.1.10.251.1.2.2.1.5 | xdsl2ChStatusActInp | 0 | 0 | Actual impulse noise protection. This parameter reports the actual impulse noise protection (INP) on the bearer channel in the L0… |
1.3.6.1.2.1.10.251.1.2.2.1.6 | xdsl2ChStatusInpReport | 0 | 0 | Impulse noise protection reporting mode. |
1.3.6.1.2.1.10.251.1.2.2.1.7 | xdsl2ChStatusNFec | 0 | 0 | Actual size of Reed-Solomon codeword. This parameter reports the actual number of Reed-Solomon redundancy bytes per codeword used… |
1.3.6.1.2.1.10.251.1.2.2.1.8 | xdsl2ChStatusRFec | 0 | 0 | Actual number of Reed-Solomon redundancy bytes. This parameter reports the actual number of Reed-Solomon redundancy bytes per cod… |
1.3.6.1.2.1.10.251.1.2.2.1.9 | xdsl2ChStatusLSymb | 0 | 0 | Actual number of bits per symbol. This parameter reports the actual number of bits per symbol assigned to the latency path in whi… |
1.3.6.1.2.1.10.251.1.2.2.1.10 | xdsl2ChStatusIntlvDepth | 0 | 0 | Actual interleaving depth. This parameter reports the actual depth of the interleaver used in the latency path in which the beare… |
1.3.6.1.2.1.10.251.1.2.2.1.11 | xdsl2ChStatusIntlvBlock | 0 | 0 | Actual interleaving block length. This parameter reports the actual block length of the interleaver used in the latency path in w… |
1.3.6.1.2.1.10.251.1.2.2.1.12 | xdsl2ChStatusLPath | 0 | 0 | Actual latency path. This parameter reports the index of the actual latency path in which the bearer is transported. The valid val… |
1.3.6.1.2.1.10.251.1.2.2.1.13 | xdsl2ChStatusAtmStatus | 0 | 0 | Indicates current state (existing failures) of the DSL channel in case its Data Path is ATM. This is a bitmap of possible condit… |
1.3.6.1.2.1.10.251.1.2.2.1.14 | xdsl2ChStatusPtmStatus | 0 | 0 | Indicates current state (existing failures) of the DSL channel in case its Data Path is PTM (Packet Transfer Mode). This is a bit… |