A count of frames for which reception on a
particular interface fails due to an internal MAC
sublayer receive error. A frame is only counted by
an instance of this object if it is not counted by
the corresponding instance of either the
dot3StatsFrameTooLongs object, the
dot3StatsAlignmentErrors object, the
dot3StatsFCSErrors object, the
dot3StatsInRangeLengthErrors object, or the
dot3StatsOutOfRangeLengthFields object.
The precise meaning of the count represented by an
instance of this object is implementation-
specific. In particular, an instance of this
object may represent a count of receive errors on
a particular interface that are not otherwise
counted.
Parsed from file LBHUB-MSH4PTBRDG-MIB.mib
Module: LBHUB-MSH4PTBRDG-MIB
A count of frames for which reception on a
particular interface fails due to an internal
MAC sublayer receive error. A frame is only
counted by an instance of this object if it is
not counted by the corresponding instance of
either the dot3StatsFrameTooLongs object, the
dot3StatsAlignmentErrors object, or the
dot3StatsFCSErrors object.
The precise meaning of the count represented by
an instance of this object is implementation-
specific. In particular, an instance of this
object may represent a count of receive errors
on a particular interface that are not
otherwise counted.
For interfaces operating at 10 Gb/s, this
counter can roll over in less than 5 minutes if
it is incrementing at its maximum rate. Since
that amount of time could be less than a
management station's poll cycle time, in order
to avoid a loss of information, a management
station is advised to poll the
dot3HCStatsInternalMacReceiveErrors object for
10 Gb/s or faster interfaces.
Discontinuities in the value of this counter can
occur at re-initialization of the management
system, and at other times as indicated by the
value of ifCounterDiscontinuityTime.
dot3StatsInternalMacReceiveErrors OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION "A count of frames for which reception on a
particular interface fails due to an internal
MAC sublayer receive error. A frame is only
counted by an instance of this object if it is
not counted by the corresponding instance of
either the dot3StatsFrameTooLongs object, the
dot3StatsAlignmentErrors object, or the
dot3StatsFCSErrors object.
The precise meaning of the count represented by
an instance of this object is implementation-
specific. In particular, an instance of this
object may represent a count of receive errors
on a particular interface that are not
otherwise counted.
Discontinuities in the value of this counter can
occur at re-initialization of the management
system, and at other times as indicated by the
value of ifCounterDiscontinuityTime."
REFERENCE "[IEEE 802.3 Std.], 30.3.1.1.15,
aFramesLostDueToIntMACRcvError."
View at oid-info.com
A count of frames for which reception on a
particular interface fails due to an internal MAC
sublayer receive error. A frame is only counted by
an instance of this object if it is not counted by
the corresponding instance of either the
dot3StatsFrameTooLongs object, the
dot3StatsAlignmentErrors object, the
dot3StatsFCSErrors object, the
dot3StatsInRangeLengthErrors object, or the
dot3StatsOutOfRangeLengthFields object.
The precise meaning of the count represented by an
instance of this object is implementation-
specific. In particular, an instance of this
object may represent a count of receive errors on
a particular interface that are not otherwise
counted.
Parsed from file 18600.MIB.txt
Company: None
Module: MSH4PortEthBr-MIB
A count of frames for which reception on a
particular interface fails due to an internal
MAC sublayer receive error. A frame is only
counted by an instance of this object if it is
not counted by the corresponding instance of
either the dot3StatsFrameTooLongs object, the
dot3StatsAlignmentErrors object, or the
dot3StatsFCSErrors object.
The precise meaning of the count represented by
an instance of this object is implementation-
specific. In particular, an instance of this
object may represent a count of receive errors
on a particular interface that are not
otherwise counted.
For interfaces operating at 10 Gb/s, this
counter can roll over in less than 5 minutes if
it is incrementing at its maximum rate. Since
that amount of time could be less than a
management station's poll cycle time, in order
to avoid a loss of information, a management
station is advised to poll the
dot3HCStatsInternalMacReceiveErrors object for
10 Gb/s or faster interfaces.
Discontinuities in the value of this counter can
occur at re-initialization of the management
system, and at other times as indicated by the
value of ifCounterDiscontinuityTime.
dot3StatsInternalMacReceiveErrors OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "A count of frames for which reception on a particular interface fails due to an internal MAC sublayer receive error. A frame is only counted by an instance of this object if it is not counted by the corresponding instance of either the dot3StatsFrameTooLongs object, the dot3StatsAlignmentErrors object, the dot3StatsFCSErrors object, the dot3StatsInRangeLengthErrors object, or the dot3StatsOutOfRangeLengthFields object. The precise meaning of the count represented by an instance of this object is implementation- specific. In particular, an instance of this object may represent a count of receive errors on a particular interface that are not otherwise counted." ::= { dot3StatsEntry 16 }
dot3StatsInternalMacReceiveErrors OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "A count of frames for which reception on a particular interface fails due to an internal MAC sublayer receive error. A frame is only counted by an instance of this object if it is not counted by the corresponding instance of either the dot3StatsFrameTooLongs object, the dot3StatsAlignmentErrors object, or the dot3StatsFCSErrors object. The precise meaning of the count represented by an instance of this object is implementation- specific. In particular, an instance of this object may represent a count of receive errors on a particular interface that are not otherwise counted. For interfaces operating at 10 Gb/s, this counter can roll over in less than 5 minutes if it is incrementing at its maximum rate. Since that amount of time could be less than a management station's poll cycle time, in order to avoid a loss of information, a management station is advised to poll the dot3HCStatsInternalMacReceiveErrors object for 10 Gb/s or faster interfaces. Discontinuities in the value of this counter can occur at re-initialization of the management system, and at other times as indicated by the value of ifCounterDiscontinuityTime." REFERENCE "[IEEE 802.3 Std.], 30.3.1.1.15, aFramesLostDueToIntMACRcvError." ::= { dot3StatsEntry 16 }
Automatically extracted from RFC2665
dot3StatsInternalMacReceiveErrors OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "A count of frames for which reception on a particular interface fails due to an internal MAC sublayer receive error. A frame is only counted by an instance of this object if it is not counted by the corresponding instance of either the dot3StatsFrameTooLongs object, the dot3StatsAlignmentErrors object, the dot3StatsFCSErrors object, the dot3StatsInRangeLengthErrors object, or the dot3StatsOutOfRangeLengthFields object. The precise meaning of the count represented by an instance of this object is implementation- specific. In particular, an instance of this object may represent a count of receive errors on a particular interface that are not otherwise counted." ::= { dot3StatsEntry 16 }
dot3StatsInternalMacReceiveErrors OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "A count of frames for which reception on a particular interface fails due to an internal MAC sublayer receive error. A frame is only counted by an instance of this object if it is not counted by the corresponding instance of either the dot3StatsFrameTooLongs object, the dot3StatsAlignmentErrors object, or the dot3StatsFCSErrors object. The precise meaning of the count represented by an instance of this object is implementation- specific. In particular, an instance of this object may represent a count of receive errors on a particular interface that are not otherwise counted. For interfaces operating at 10 Gb/s, this counter can roll over in less than 5 minutes if it is incrementing at its maximum rate. Since that amount of time could be less than a management station's poll cycle time, in order to avoid a loss of information, a management station is advised to poll the dot3HCStatsInternalMacReceiveErrors object for 10 Gb/s or faster interfaces. Discontinuities in the value of this counter can occur at re-initialization of the management system, and at other times as indicated by the value of ifCounterDiscontinuityTime." REFERENCE "[IEEE 802.3 Std.], 30.3.1.1.15, aFramesLostDueToIntMACRcvError." ::= { dot3StatsEntry 16 }
Internet Assigned Numbers Authority
OID | Name | Sub children | Sub Nodes Total | Description |
---|---|---|---|---|
1.3.6.1.2.1.10.7.2.1.1 | dot3StatsIndex | 5 | 5 | An index value that uniquely identifies an interface to an ethernet-like medium. The interface identified by a particular value … |
1.3.6.1.2.1.10.7.2.1.2 | dot3StatsAlignmentErrors | 0 | 0 | A count of frames received on a particular interface that are not an integral number of octets in length and do not pass the FCS … |
1.3.6.1.2.1.10.7.2.1.3 | dot3StatsFCSErrors | 0 | 0 | A count of frames received on a particular interface that are an integral number of octets in length but do not pass the FCS chec… |
1.3.6.1.2.1.10.7.2.1.4 | dot3StatsSingleCollisionFrames | 0 | 0 | A count of successfully transmitted frames on a particular interface for which transmission is inhibited by exactly one collision… |
1.3.6.1.2.1.10.7.2.1.5 | dot3StatsMultipleCollisionFrames | 0 | 0 | A count of successfully transmitted frames on a particular interface for which transmission is inhibited by more than one collisi… |
1.3.6.1.2.1.10.7.2.1.6 | dot3StatsSQETestErrors | 0 | 0 | A count of times that the SQE TEST ERROR message is generated by the PLS sublayer for a particular interface. The SQE TEST ERROR … |
1.3.6.1.2.1.10.7.2.1.7 | dot3StatsDeferredTransmissions | 0 | 0 | A count of frames for which the first transmission attempt on a particular interface is delayed because the medium is busy. The co… |
1.3.6.1.2.1.10.7.2.1.8 | dot3StatsLateCollisions | 0 | 0 | The number of times that a collision is detected on a particular interface later than 512 bit-times into the transmission of a pa… |
1.3.6.1.2.1.10.7.2.1.9 | dot3StatsExcessiveCollisions | 0 | 0 | A count of frames for which transmission on a particular interface fails due to excessive collisions. |
1.3.6.1.2.1.10.7.2.1.10 | dot3StatsInternalMacTransmitErrors | 0 | 0 | A count of frames for which transmission on a particular interface fails due to an internal MAC sublayer transmit error. A frame … |
1.3.6.1.2.1.10.7.2.1.11 | dot3StatsCarrierSenseErrors | 0 | 0 | The number of times that the carrier sense condition was lost or never asserted when attempting to transmit a frame on a particul… |
1.3.6.1.2.1.10.7.2.1.12 | dot3StatsExcessiveDeferrals, dot3StatsFiller12 | 0 | 0 | A count of frames for which transmission on a particular interface is deferred for an excessive period of time. |
1.3.6.1.2.1.10.7.2.1.13 | dot3StatsFrameTooLongs | 0 | 0 | A count of frames received on a particular interface that exceed the maximum permitted frame size. The count represented by an ins… |
1.3.6.1.2.1.10.7.2.1.14 | dot3StatsInRangeLengthErrors, dot3StatsFiller14 | 0 | 0 | A count of frames received on a particular interface with a length field value that falls between the minimum unpadded LLC data s… |
1.3.6.1.2.1.10.7.2.1.15 | dot3StatsOutOfRangeLengthFields, dot3StatsFiller15 | 0 | 0 | A count of frames received on a particular interface for which the length field value exceeds the maximum allowed LLC data size. T… |
1.3.6.1.2.1.10.7.2.1.17 | dot3StatsEtherChipSet | 1 | 1 | This object contains an OBJECT IDENTIFIER which identifies the chipset used to realize the interface. Ethernet-like interfaces are… |
1.3.6.1.2.1.10.7.2.1.18 | dot3StatsSymbolErrors | 0 | 0 | For an interface operating at 100 Mb/s, the number of times there was an invalid data symbol when a valid carrier was present. For… |
1.3.6.1.2.1.10.7.2.1.19 | dot3StatsDuplexStatus | 0 | 0 | The current mode of operation of the MAC entity. 'unknown' indicates that the current duplex mode could not be determined. Manage… |
1.3.6.1.2.1.10.7.2.1.20 | dot3StatsRateControlAbility | 0 | 0 | 'true' for interfaces operating at speeds above 1000 Mb/s that support Rate Control through lowering the average data rate of the… |
1.3.6.1.2.1.10.7.2.1.21 | dot3StatsRateControlStatus | 0 | 0 | The current Rate Control mode of operation of the MAC sublayer of this interface. |