A count of times that the SQE TEST ERROR message
is generated by the PLS sublayer for a particular
interface. The SQE TEST ERROR message is defined
in section 7.2.2.2.4 of [12] and its generation is
described in section 7.2.4.6 of the same
document.
Parsed from file LBHUB-MSH4PTBRDG-MIB.mib
Module: LBHUB-MSH4PTBRDG-MIB
A count of times that the SQE TEST ERROR
is received on a particular interface. The
SQE TEST ERROR is set in accordance with the
rules for verification of the SQE detection
mechanism in the PLS Carrier Sense Function as
described in IEEE Std. 802.3, 2000 Edition,
section 7.2.4.6.
This counter does not increment on interfaces
operating at speeds greater than 10 Mb/s, or on
interfaces operating in full-duplex mode.
Discontinuities in the value of this counter can
occur at re-initialization of the management
system, and at other times as indicated by the
value of ifCounterDiscontinuityTime.
dot3StatsSQETestErrors OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS mandatory
DESCRIPTION
"A count of times that the SQE TEST ERROR
message is generated by the PLS sublayer for a
particular interface. The SQE TEST ERROR
message is defined in section 7.2.2.2.4 of
ANSI/IEEE 802.3-1985 and its generation is
described in section 7.2.4.6 of the same
document."
REFERENCE
"ANSI/IEEE Std 802.3-1985 Carrier Sense
Multiple Access with Collision Detection Access
Method and Physical Layer Specifications"
View at oid-info.com
A count of times that the SQE TEST ERROR message
is generated by the PLS sublayer for a particular
interface. The SQE TEST ERROR message is defined
in section 7.2.2.2.4 of [12] and its generation is
described in section 7.2.4.6 of the same
document.
Parsed from file 18600.MIB.txt
Company: None
Module: MSH4PortEthBr-MIB
A count of times that the SQE TEST ERROR
is received on a particular interface. The
SQE TEST ERROR is set in accordance with the
rules for verification of the SQE detection
mechanism in the PLS Carrier Sense Function as
described in IEEE Std. 802.3, 2000 Edition,
section 7.2.4.6.
This counter does not increment on interfaces
operating at speeds greater than 10 Mb/s, or on
interfaces operating in full-duplex mode.
Discontinuities in the value of this counter can
occur at re-initialization of the management
system, and at other times as indicated by the
value of ifCounterDiscontinuityTime.
dot3StatsSQETestErrors OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "A count of times that the SQE TEST ERROR message is generated by the PLS sublayer for a particular interface. The SQE TEST ERROR message is defined in section 7.2.2.2.4 of [12] and its generation is described in section 7.2.4.6 of the same document." ::= { dot3StatsEntry 6 }
dot3StatsSQETestErrors OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "A count of times that the SQE TEST ERROR is received on a particular interface. The SQE TEST ERROR is set in accordance with the rules for verification of the SQE detection mechanism in the PLS Carrier Sense Function as described in IEEE Std. 802.3, 2000 Edition, section 7.2.4.6. This counter does not increment on interfaces operating at speeds greater than 10 Mb/s, or on interfaces operating in full-duplex mode. Discontinuities in the value of this counter can occur at re-initialization of the management system, and at other times as indicated by the value of ifCounterDiscontinuityTime." REFERENCE "[IEEE 802.3 Std.], 7.2.4.6, also 30.3.2.1.4, aSQETestErrors." ::= { dot3StatsEntry 6 }
Automatically extracted from rfc1643
dot3StatsSQETestErrors OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "A count of times that the SQE TEST ERROR message is generated by the PLS sublayer for a particular interface. The SQE TEST ERROR message is defined in section 7.2.2.2.4 of [12] and its generation is described in section 7.2.4.6 of the same document." ::= { dot3StatsEntry 6 }
dot3StatsSQETestErrors OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "A count of times that the SQE TEST ERROR is received on a particular interface. The SQE TEST ERROR is set in accordance with the rules for verification of the SQE detection mechanism in the PLS Carrier Sense Function as described in IEEE Std. 802.3, 2000 Edition, section 7.2.4.6. This counter does not increment on interfaces operating at speeds greater than 10 Mb/s, or on interfaces operating in full-duplex mode. Discontinuities in the value of this counter can occur at re-initialization of the management system, and at other times as indicated by the value of ifCounterDiscontinuityTime." REFERENCE "[IEEE 802.3 Std.], 7.2.4.6, also 30.3.2.1.4, aSQETestErrors." ::= { dot3StatsEntry 6 }
Internet Assigned Numbers Authority
OID | Name | Sub children | Sub Nodes Total | Description |
---|---|---|---|---|
1.3.6.1.2.1.10.7.2.1.1 | dot3StatsIndex | 5 | 5 | An index value that uniquely identifies an interface to an ethernet-like medium. The interface identified by a particular value … |
1.3.6.1.2.1.10.7.2.1.2 | dot3StatsAlignmentErrors | 0 | 0 | A count of frames received on a particular interface that are not an integral number of octets in length and do not pass the FCS … |
1.3.6.1.2.1.10.7.2.1.3 | dot3StatsFCSErrors | 0 | 0 | A count of frames received on a particular interface that are an integral number of octets in length but do not pass the FCS chec… |
1.3.6.1.2.1.10.7.2.1.4 | dot3StatsSingleCollisionFrames | 0 | 0 | A count of successfully transmitted frames on a particular interface for which transmission is inhibited by exactly one collision… |
1.3.6.1.2.1.10.7.2.1.5 | dot3StatsMultipleCollisionFrames | 0 | 0 | A count of successfully transmitted frames on a particular interface for which transmission is inhibited by more than one collisi… |
1.3.6.1.2.1.10.7.2.1.7 | dot3StatsDeferredTransmissions | 0 | 0 | A count of frames for which the first transmission attempt on a particular interface is delayed because the medium is busy. The co… |
1.3.6.1.2.1.10.7.2.1.8 | dot3StatsLateCollisions | 0 | 0 | The number of times that a collision is detected on a particular interface later than 512 bit-times into the transmission of a pa… |
1.3.6.1.2.1.10.7.2.1.9 | dot3StatsExcessiveCollisions | 0 | 0 | A count of frames for which transmission on a particular interface fails due to excessive collisions. |
1.3.6.1.2.1.10.7.2.1.10 | dot3StatsInternalMacTransmitErrors | 0 | 0 | A count of frames for which transmission on a particular interface fails due to an internal MAC sublayer transmit error. A frame … |
1.3.6.1.2.1.10.7.2.1.11 | dot3StatsCarrierSenseErrors | 0 | 0 | The number of times that the carrier sense condition was lost or never asserted when attempting to transmit a frame on a particul… |
1.3.6.1.2.1.10.7.2.1.12 | dot3StatsExcessiveDeferrals, dot3StatsFiller12 | 0 | 0 | A count of frames for which transmission on a particular interface is deferred for an excessive period of time. |
1.3.6.1.2.1.10.7.2.1.13 | dot3StatsFrameTooLongs | 0 | 0 | A count of frames received on a particular interface that exceed the maximum permitted frame size. The count represented by an ins… |
1.3.6.1.2.1.10.7.2.1.14 | dot3StatsInRangeLengthErrors, dot3StatsFiller14 | 0 | 0 | A count of frames received on a particular interface with a length field value that falls between the minimum unpadded LLC data s… |
1.3.6.1.2.1.10.7.2.1.15 | dot3StatsOutOfRangeLengthFields, dot3StatsFiller15 | 0 | 0 | A count of frames received on a particular interface for which the length field value exceeds the maximum allowed LLC data size. T… |
1.3.6.1.2.1.10.7.2.1.16 | dot3StatsInternalMacReceiveErrors | 0 | 0 | A count of frames for which reception on a particular interface fails due to an internal MAC sublayer receive error. A frame is o… |
1.3.6.1.2.1.10.7.2.1.17 | dot3StatsEtherChipSet | 1 | 1 | This object contains an OBJECT IDENTIFIER which identifies the chipset used to realize the interface. Ethernet-like interfaces are… |
1.3.6.1.2.1.10.7.2.1.18 | dot3StatsSymbolErrors | 0 | 0 | For an interface operating at 100 Mb/s, the number of times there was an invalid data symbol when a valid carrier was present. For… |
1.3.6.1.2.1.10.7.2.1.19 | dot3StatsDuplexStatus | 0 | 0 | The current mode of operation of the MAC entity. 'unknown' indicates that the current duplex mode could not be determined. Manage… |
1.3.6.1.2.1.10.7.2.1.20 | dot3StatsRateControlAbility | 0 | 0 | 'true' for interfaces operating at speeds above 1000 Mb/s that support Rate Control through lowering the average data rate of the… |
1.3.6.1.2.1.10.7.2.1.21 | dot3StatsRateControlStatus | 0 | 0 | The current Rate Control mode of operation of the MAC sublayer of this interface. |