pimSGDRRegisterStopTimer OBJECT-TYPE
SYNTAX TimeTicks
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"If pimSGDRRegisterState is \prune\, this is the time
remaining before the local router sends a Null-Register
message to the RP. If pimSGDRRegisterState is
\joinPending\, this is the time remaining before the local
router resumes encapsulating data packets and sending them
to the RP. Otherwise, this is zero. This timer is called
the Register-Stop Timer in the PIM-SM specification."
REFERENCE "RFC 4601 section 4.4"
View at oid-info.com
If pimSGDRRegisterState is 'prune', this is the time
remaining before the local router sends a Null-Register
message to the RP. If pimSGDRRegisterState is
'joinPending', this is the time remaining before the local
router resumes encapsulating data packets and sending them
to the RP. Otherwise, this is zero. This timer is called
the Register-Stop Timer in the PIM-SM specification.
Parsed from file rfc5060-Protocol-Independent-Multicast-PIM.mib.txt
Company: None
Module: PIM-STD-MIB
If pimSGDRRegisterState is 'prune', this is the time
remaining before the local router sends a Null-Register
message to the RP. If pimSGDRRegisterState is
'joinPending', this is the time remaining before the local
router resumes encapsulating data packets and sending them
to the RP. Otherwise, this is zero. This timer is called
the Register-Stop Timer in the PIM-SM specification.
Parsed from file PIM-STD-MIB.mib
Module: PIM-STD-MIB
Automatically extracted from RFC5060
pimSGDRRegisterStopTimer OBJECT-TYPE SYNTAX TimeTicks MAX-ACCESS read-only STATUS current DESCRIPTION "If pimSGDRRegisterState is 'prune', this is the time remaining before the local router sends a Null-Register message to the RP. If pimSGDRRegisterState is 'joinPending', this is the time remaining before the local router resumes encapsulating data packets and sending them to the RP. Otherwise, this is zero. This timer is called the Register-Stop Timer in the PIM-SM specification." REFERENCE "RFC 4601 section 4.4" ::= { pimSGEntry 20 }
pimSGDRRegisterStopTimer OBJECT-TYPE SYNTAX TimeTicks MAX-ACCESS read-only STATUS current DESCRIPTION "If pimSGDRRegisterState is 'prune', this is the time remaining before the local router sends a Null-Register message to the RP. If pimSGDRRegisterState is 'joinPending', this is the time remaining before the local router resumes encapsulating data packets and sending them to the RP. Otherwise, this is zero. This timer is called the Register-Stop Timer in the PIM-SM specification." REFERENCE "RFC 4601 section 4.4" ::= { pimSGEntry 20 }
Internet Assigned Numbers Authority
OID | Name | Sub children | Sub Nodes Total | Description |
---|---|---|---|---|
1.3.6.1.2.1.157.1.6.1.1 | pimSGAddressType | 0 | 0 | The address type of the source and multicast group for this entry. |
1.3.6.1.2.1.157.1.6.1.2 | pimSGGrpAddress | 0 | 0 | The multicast group address for this entry. The InetAddressType is given by the pimSGAddressType object. |
1.3.6.1.2.1.157.1.6.1.3 | pimSGSrcAddress | 0 | 0 | The source address for this entry. The InetAddressType is given by the pimSGAddressType object. |
1.3.6.1.2.1.157.1.6.1.4 | pimSGUpTime | 0 | 0 | The time since this entry was created by the local router. |
1.3.6.1.2.1.157.1.6.1.5 | pimSGPimMode | 0 | 0 | Whether pimSGGrpAddress is an SSM (Source Specific Multicast, used with PIM-SM) or ASM (Any Source Multicast, used with PIM-SM) g… |
1.3.6.1.2.1.157.1.6.1.6 | pimSGUpstreamJoinState | 0 | 0 | Whether the local router should join the shortest-path tree for the source and group represented by this entry. This corresponds… |
1.3.6.1.2.1.157.1.6.1.7 | pimSGUpstreamJoinTimer | 0 | 0 | The time remaining before the local router next sends a periodic (S,G) Join message on pimSGRPFIfIndex. This timer is called the… |
1.3.6.1.2.1.157.1.6.1.8 | pimSGUpstreamNeighbor | 0 | 0 | The primary address of the neighbor on pimSGRPFIfIndex that the local router is sending periodic (S,G) Join messages to. This is … |
1.3.6.1.2.1.157.1.6.1.9 | pimSGRPFIfIndex | 0 | 0 | The value of ifIndex for the RPF interface towards the source, or zero if the RPF interface is unknown. |
1.3.6.1.2.1.157.1.6.1.10 | pimSGRPFNextHopType | 0 | 0 | The address type of the RPF next hop towards the source, or unknown(0) if the RPF next hop is unknown. |
1.3.6.1.2.1.157.1.6.1.11 | pimSGRPFNextHop | 0 | 0 | The address of the RPF next hop towards the source. The InetAddressType is given by the pimSGRPFNextHopType. This address is ca… |
1.3.6.1.2.1.157.1.6.1.12 | pimSGRPFRouteProtocol | 0 | 0 | The routing mechanism via which the route used to find the RPF interface towards the source was learned. |
1.3.6.1.2.1.157.1.6.1.13 | pimSGRPFRouteAddress | 0 | 0 | The IP address that, when combined with the corresponding value of pimSGRPFRoutePrefixLength, identifies the route used to find t… |
1.3.6.1.2.1.157.1.6.1.14 | pimSGRPFRoutePrefixLength | 0 | 0 | The prefix length that, when combined with the corresponding value of pimSGRPFRouteAddress, identifies the route used to find the… |
1.3.6.1.2.1.157.1.6.1.15 | pimSGRPFRouteMetricPref | 0 | 0 | The metric preference of the route used to find the RPF interface towards the source. |
1.3.6.1.2.1.157.1.6.1.16 | pimSGRPFRouteMetric | 0 | 0 | The routing metric of the route used to find the RPF interface towards the source. |
1.3.6.1.2.1.157.1.6.1.17 | pimSGSPTBit | 0 | 0 | Whether the SPT bit is set; and therefore whether forwarding is taking place on the shortest-path tree. |
1.3.6.1.2.1.157.1.6.1.18 | pimSGKeepaliveTimer | 0 | 0 | The time remaining before this (S,G) state expires, in the absence of explicit (S,G) local membership or (S,G) Join messages rece… |
1.3.6.1.2.1.157.1.6.1.19 | pimSGDRRegisterState | 0 | 0 | Whether the local router should encapsulate (S,G) data packets in Register messages and send them to the RP. This corresponds to… |
1.3.6.1.2.1.157.1.6.1.21 | pimSGRPRegisterPMBRAddressType | 0 | 0 | The address type of the first PIM Multicast Border Router to send a Register message with the Border bit set. This object is unk… |
1.3.6.1.2.1.157.1.6.1.22 | pimSGRPRegisterPMBRAddress | 0 | 0 | The IP address of the first PIM Multicast Border Router to send a Register message with the Border bit set. The InetAddressType … |
1.3.6.1.2.1.157.1.6.1.23 | pimSGUpstreamPruneState | 0 | 0 | Whether the local router has pruned itself from the tree. This corresponds to the state of the upstream prune (S,G) state machine… |
1.3.6.1.2.1.157.1.6.1.24 | pimSGUpstreamPruneLimitTimer | 0 | 0 | The time remaining before the local router may send a (S,G) Prune message on pimSGRPFIfIndex. This timer is called the (S,G) Pru… |
1.3.6.1.2.1.157.1.6.1.25 | pimSGOriginatorState | 0 | 0 | Whether the router is an originator for an (S,G) message flow. This corresponds to the state of the per-(S,G) Originator state m… |
1.3.6.1.2.1.157.1.6.1.26 | pimSGSourceActiveTimer | 0 | 0 | If pimSGOriginatorState is 'originator', this is the time remaining before the local router reverts to a notOriginator state. Ot… |
1.3.6.1.2.1.157.1.6.1.27 | pimSGStateRefreshTimer | 0 | 0 | If pimSGOriginatorState is 'originator', this is the time remaining before the local router sends a State Refresh message. Other… |