The MIB module to describe generic objects for
ethernet-like network interfaces.
The following reference is used throughout this
MIB module:
[IEEE 802.3 Std] refers to:
IEEE Std 802.3, 2002 Edition: 'IEEE Standard
for Information technology -
Telecommunications and information exchange
between systems - Local and metropolitan
area networks - Specific requirements -
Part 3: Carrier sense multiple access with
collision detection (CSMA/CD) access method
and physical layer specifications', as
amended by IEEE Std 802.3ae-2002:
'Amendment: Media Access Control (MAC)
Parameters, Physical Layer, and Management
Parameters for 10 Gb/s Operation', August,
2002.
Of particular interest is Clause 30, '10 Mb/s,
100 Mb/s, 1000 Mb/s, and 10 Gb/s Management'.
Copyright (C) The Internet Society (2003). This
version of this MIB module is part of RFC 3635;
see the RFC itself for full legal notices.
Parsed from file EtherLike-MIB.mib
Module: EtherLike-MIB
etherMIB MODULE-IDENTITY
LAST-UPDATED "9908240400Z" -- August 24, 1999
ORGANIZATION "IETF Ethernet Interfaces and Hub MIB
Working Group"
CONTACT-INFO
"WG E-mail: [email protected]
To subscribe: [email protected]
Chair: Dan Romascanu
Postal: Lucent Technologies
Atidum Technology Park, Bldg. 3
Tel Aviv 61131
Israel
Tel: +972 3 645 8414
E-mail: [email protected]
Editor: John Flick
Postal: Hewlett-Packard Company
8000 Foothills Blvd. M/S 5557
Roseville, CA 95747-5557
USA
Tel: +1 916 785 4018
Fax: +1 916 785 1199
E-mail: [email protected]
Editor: Jeffrey Johnson
Postal: RedBack Networks
2570 North First Street, Suite 410
San Jose, CA, 95131
USA
Tel: +1 408 571 2699
Fax: +1 408 571 2698
E-Mail: [email protected]"
DESCRIPTION "The MIB module to describe generic objects for
Ethernet-like network interfaces.
The following reference is used throughout this
MIB module:
[IEEE 802.3 Std] refers to:
IEEE Std 802.3, 1998 Edition: Information
technology - Telecommunications and
information exchange between systems -
Local and metropolitan area networks -
Specific requirements - Part 3: Carrier
sense multiple access with collision
detection (CSMA/CD) access method and
physical layer specifications,
September 1998.
Of particular interest is Clause 30, Mb/s,
100Mb/s and 1000Mb/s Management."
REVISION "9908240400Z" -- August 24, 1999
DESCRIPTION "Updated to include support for 1000 Mb/sec
interfaces and full-duplex interfaces.
This version published as RFC 2665."
REVISION "9806032150Z"
DESCRIPTION "Updated to include support for 100 Mb/sec
interfaces.
This version published as RFC 2358."
REVISION "9402030400Z"
DESCRIPTION "Initial version, published as RFC 1650."
View at oid-info.com
The MIB module to describe generic objects for
Ethernet-like network interfaces.
The following reference is used throughout this
MIB module:
[IEEE 802.3 Std] refers to:
IEEE Std 802.3, 1998 Edition: 'Information
technology - Telecommunications and
information exchange between systems -
Local and metropolitan area networks -
Specific requirements - Part 3: Carrier
sense multiple access with collision
detection (CSMA/CD) access method and
physical layer specifications',
September 1998.
Of particular interest is Clause 30, '10Mb/s,
100Mb/s and 1000Mb/s Management'.
Parsed from file rfc1643.mib.txt
Company: None
Module: EtherLike-MIB
The MIB module to describe generic objects for
ethernet-like network interfaces.
The following reference is used throughout this
MIB module:
[IEEE 802.3 Std] refers to:
IEEE Std 802.3, 2002 Edition: 'IEEE Standard
for Information technology -
Telecommunications and information exchange
between systems - Local and metropolitan
area networks - Specific requirements -
Part 3: Carrier sense multiple access with
collision detection (CSMA/CD) access method
and physical layer specifications', as
amended by IEEE Std 802.3ae-2002:
'Amendment: Media Access Control (MAC)
Parameters, Physical Layer, and Management
Parameters for 10 Gb/s Operation', August,
2002.
Of particular interest is Clause 30, '10 Mb/s,
100 Mb/s, 1000 Mb/s, and 10 Gb/s Management'.
Copyright (C) The Internet Society (2003). This
version of this MIB module is part of RFC 3635;
see the RFC itself for full legal notices.
etherMIB MODULE-IDENTITY LAST-UPDATED "200309190000Z" ORGANIZATION "IETF Ethernet Interfaces and Hub MIB Working Group" CONTACT-INFO "WG E-mail: [email protected] To subscribe: [email protected] Chair: Dan Romascanu Postal: Avaya Inc. Atidum Technology Park, Bldg. 3 Tel Aviv 61131 Israel Tel: +972 3 645 8414 E-mail: [email protected] Editor: John Flick Postal: Hewlett-Packard Company 8000 Foothills Blvd. M/S 5557 Roseville, CA 95747-5557 USA Tel: +1 916 785 4018 Fax: +1 916 785 1199 E-mail: [email protected]" DESCRIPTION "The MIB module to describe generic objects for ethernet-like network interfaces. The following reference is used throughout this MIB module: [IEEE 802.3 Std] refers to: IEEE Std 802.3, 2002 Edition: 'IEEE Standard for Information technology - Telecommunications and information exchange between systems - Local and metropolitan area networks - Specific requirements - Part 3: Carrier sense multiple access with collision detection (CSMA/CD) access method and physical layer specifications', as amended by IEEE Std 802.3ae-2002: 'Amendment: Media Access Control (MAC) Parameters, Physical Layer, and Management Parameters for 10 Gb/s Operation', August, 2002. Of particular interest is Clause 30, '10 Mb/s, 100 Mb/s, 1000 Mb/s, and 10 Gb/s Management'. Copyright (C) The Internet Society (2003). This version of this MIB module is part of RFC 3635; see the RFC itself for full legal notices." REVISION "200309190000Z" DESCRIPTION "Updated to include support for 10 Gb/sec interfaces. This resulted in the following revisions: - Updated dot3StatsAlignmentErrors and dot3StatsSymbolErrors DESCRIPTIONs to reflect behaviour at 10 Gb/s - Added dot3StatsRateControlAbility and dot3RateControlStatus for management of the Rate Control function in 10 Gb/s WAN applications - Added 64-bit versions of all counters that are used on high-speed ethernet interfaces - Added object groups to contain the new objects - Deprecated etherStatsBaseGroup and split into etherStatsBaseGroup2 and etherStatsHalfDuplexGroup, so that interfaces which can only operate at full-duplex do not need to implement half-duplex-only statistics - Deprecated dot3Compliance and replaced it with dot3Compliance2, which includes the compliance information for the new object groups In addition, the dot3Tests and dot3Errors object identities have been deprecated, since there is no longer a standard method for using them. This version published as RFC 3635." REVISION "199908240400Z" DESCRIPTION "Updated to include support for 1000 Mb/sec interfaces and full-duplex interfaces. This version published as RFC 2665." REVISION "199806032150Z" DESCRIPTION "Updated to include support for 100 Mb/sec interfaces. This version published as RFC 2358." REVISION "199402030400Z" DESCRIPTION "Initial version, published as RFC 1650." ::= { mib-2 35 }
etherMIB OBJECT IDENTIFIER ::= { mib-2 35 }
Automatically extracted from RFC2665
etherMIB MODULE-IDENTITY LAST-UPDATED "9908240400Z" ORGANIZATION "IETF Ethernet Interfaces and Hub MIB Working Group" CONTACT-INFO "WG E-mail: [email protected] To subscribe: [email protected] Chair: Dan Romascanu Postal: Lucent Technologies Atidum Technology Park, Bldg. 3 Tel Aviv 61131 Israel Tel: +972 3 645 8414 E-mail: [email protected] Editor: John Flick Postal: Hewlett-Packard Company 8000 Foothills Blvd. M/S 5557 Roseville, CA 95747-5557 USA Tel: +1 916 785 4018 Fax: +1 916 785 1199 E-mail: [email protected] Editor: Jeffrey Johnson Postal: RedBack Networks 2570 North First Street, Suite 410 San Jose, CA, 95131 USA Tel: +1 408 571 2699 Fax: +1 408 571 2698 E-Mail: [email protected]" DESCRIPTION "The MIB module to describe generic objects for Ethernet-like network interfaces. The following reference is used throughout this MIB module: [IEEE 802.3 Std] refers to: IEEE Std 802.3, 1998 Edition: 'Information technology - Telecommunications and information exchange between systems - Local and metropolitan area networks - Specific requirements - Part 3: Carrier sense multiple access with collision detection (CSMA/CD) access method and physical layer specifications', September 1998. Of particular interest is Clause 30, '10Mb/s, 100Mb/s and 1000Mb/s Management'." REVISION "9908240400Z" DESCRIPTION "Updated to include support for 1000 Mb/sec interfaces and full-duplex interfaces. This version published as RFC 2665." REVISION "9806032150Z" DESCRIPTION "Updated to include support for 100 Mb/sec interfaces. This version published as RFC 2358." REVISION "9402030400Z" DESCRIPTION "Initial version, published as RFC 1650." ::= { mib-2 35 }
etherMIB MODULE-IDENTITY LAST-UPDATED "200309190000Z" ORGANIZATION "IETF Ethernet Interfaces and Hub MIB Working Group" CONTACT-INFO "WG E-mail: [email protected] To subscribe: [email protected] Chair: Dan Romascanu Postal: Avaya Inc. Atidum Technology Park, Bldg. 3 Tel Aviv 61131 Israel Tel: +972 3 645 8414 E-mail: [email protected] Editor: John Flick Postal: Hewlett-Packard Company 8000 Foothills Blvd. M/S 5557 Roseville, CA 95747-5557 USA Tel: +1 916 785 4018 Fax: +1 916 785 1199 E-mail: [email protected]" DESCRIPTION "The MIB module to describe generic objects for ethernet-like network interfaces. The following reference is used throughout this MIB module: [IEEE 802.3 Std] refers to: IEEE Std 802.3, 2002 Edition: 'IEEE Standard for Information technology - Telecommunications and information exchange between systems - Local and metropolitan area networks - Specific requirements - Part 3: Carrier sense multiple access with collision detection (CSMA/CD) access method and physical layer specifications', as amended by IEEE Std 802.3ae-2002: 'Amendment: Media Access Control (MAC) Parameters, Physical Layer, and Management Parameters for 10 Gb/s Operation', August, 2002. Of particular interest is Clause 30, '10 Mb/s, 100 Mb/s, 1000 Mb/s, and 10 Gb/s Management'. Copyright (C) The Internet Society (2003). This version of this MIB module is part of RFC 3635; see the RFC itself for full legal notices." REVISION "200309190000Z" DESCRIPTION "Updated to include support for 10 Gb/sec interfaces. This resulted in the following revisions: - Updated dot3StatsAlignmentErrors and dot3StatsSymbolErrors DESCRIPTIONs to reflect behaviour at 10 Gb/s - Added dot3StatsRateControlAbility and dot3RateControlStatus for management of the Rate Control function in 10 Gb/s WAN applications - Added 64-bit versions of all counters that are used on high-speed ethernet interfaces - Added object groups to contain the new objects - Deprecated etherStatsBaseGroup and split into etherStatsBaseGroup2 and etherStatsHalfDuplexGroup, so that interfaces which can only operate at full-duplex do not need to implement half-duplex-only statistics - Deprecated dot3Compliance and replaced it with dot3Compliance2, which includes the compliance information for the new object groups In addition, the dot3Tests and dot3Errors object identities have been deprecated, since there is no longer a standard method for using them. This version published as RFC 3635." REVISION "199908240400Z" DESCRIPTION "Updated to include support for 1000 Mb/sec interfaces and full-duplex interfaces. This version published as RFC 2665." REVISION "199806032150Z" DESCRIPTION "Updated to include support for 100 Mb/sec interfaces. This version published as RFC 2358." REVISION "199402030400Z" DESCRIPTION "Initial version, published as RFC 1650." ::= { mib-2 35 }
Internet Assigned Numbers Authority
| OID | Name | Sub children | Sub Nodes Total | Description |
|---|---|---|---|---|
| 1.3.6.1.2.1.35.1 | etherMIBObjects | 0 | 0 | None |
| 1.3.6.1.2.1.35.2 | etherConformance | 2 | 21 | None |
To many brothers! Only 100 nearest brothers are shown.
| OID | Name | Sub children | Sub Nodes Total | Description |
|---|---|---|---|---|
| ... | ||||
| 1.3.6.1.2.1.0 | reserved | 0 | 0 | Reserved |
| 1.3.6.1.2.1.1 | system | 9 | 647 | System group |
| 1.3.6.1.2.1.2 | interface, interfaces | 2 | 311 | Interfaces group |
| 1.3.6.1.2.1.3 | at | 1 | 14 | Address translation |
| 1.3.6.1.2.1.4 | ip | 40 | 494 | Internet Protocol |
| 1.3.6.1.2.1.5 | icmp | 30 | 74 | Internet Control Message Protocol |
| 1.3.6.1.2.1.6 | tcp | 20 | 55 | Transmission Control Protocol |
| 1.3.6.1.2.1.7 | udp | 9 | 27 | User Datagram Protocol |
| 1.3.6.1.2.1.8 | egp | 6 | 22 | Exterior Gateway Protocol |
| 1.3.6.1.2.1.9 | cmot, oim | 9 | 45 | Common Management Information Services and Protocol Over TCP/IP |
| 1.3.6.1.2.1.10 | transmission | 59 | 7658 | Transmission |
| 1.3.6.1.2.1.11 | snmp | 32 | 136 | Simple Network Management Protocol |
| 1.3.6.1.2.1.12 | genericIf, ifExtensions, ifExtentsions | 4 | 25 | Generic Interface Extension Objects |
| 1.3.6.1.2.1.13 | appletalk, ospf | 17 | 444 | None |
| 1.3.6.1.2.1.14 | ospf | 20 | 311 | Open Shortest Path First (OSPF) |
| 1.3.6.1.2.1.15 | bgp | 13 | 96 | The MIB module for BGP-4. |
| 1.3.6.1.2.1.16 | rmon | 33 | 2635 | Managed Objects for Bridges |
| 1.3.6.1.2.1.17 | bridge, dot1dBridge | 14 | 500 | Bridge objects |
| 1.3.6.1.2.1.18 | decnetP4, phiv | 14 | 414 | Decnet Phase 4 |
| 1.3.6.1.2.1.19 | character, char | 5 | 49 | The MIB module for character stream devices. |
| 1.3.6.1.2.1.20 | snmpParties | 2 | 26 | None |
| 1.3.6.1.2.1.21 | snmpSecrets | 3 | 21 | None |
| 1.3.6.1.2.1.22 | snmpDot3RptrMgt | 6 | 161 | None |
| 1.3.6.1.2.1.23 | rip2 | 5 | 39 | The MIB module to describe the RIP2 Version 2 Protocol |
| 1.3.6.1.2.1.24 | ident | 1 | 8 | None |
| 1.3.6.1.2.1.25 | host, hostResourcesMibModule | 7 | 179 | The Host Resourcers MIB defines a uniform set of objects useful for the management of host computers. Host computers are indepen… |
| 1.3.6.1.2.1.26 | snmpDot3MauMgt | 7 | 167 | Ethernet MAU mib Contains definitions for Ethernet MAUs, including port speed and autonegotiation. |
| 1.3.6.1.2.1.27 | application | 5 | 44 | The MIB module describing network service applications |
| 1.3.6.1.2.1.28 | mta | 6 | 87 | The MIB module describing Message Transfer Agents (MTAs) |
| 1.3.6.1.2.1.29 | dsa, dsaMIB | 4 | 48 | X.500 Directory Monitoring |
| 1.3.6.1.2.1.30 | ianaifType, ianaifTypeCNT | 0 | 0 | This MIB module defines the IANAifType Textual Convention, and thus the enumerated values of the ifType object defined in MIB-II'… |
| 1.3.6.1.2.1.31 | ifMIB | 2 | 65 | The MIB module to describe generic objects for network interface sub-layers. This MIB is an updated version of MIB-II's ifTable,… |
| 1.3.6.1.2.1.32 | dns | 2 | 234 | The OID assigned to DNS MIB work by the IANA. |
| 1.3.6.1.2.1.33 | upsMIB | 4 | 345 | The MIB module to describe Uninterruptible Power Supplies. |
| 1.3.6.1.2.1.34 | snanauMIB | 9 | 1341 | This is the MIB module for objects used to manage SNA devices. |
| 1.3.6.1.2.1.36 | sipMIB | 2 | 20 | The MIB module to describe SMDS interfaces objects. |
| 1.3.6.1.2.1.37 | atmMIB | 3 | 342 | This is the MIB Module for ATM and AAL5-related objects for managing ATM interfaces, ATM virtual links, ATM cross-connects, AAL5 … |
| 1.3.6.1.2.1.38 | mdmMIB | 2 | 221 | The MIB module for management of dial-up modems. |
| 1.3.6.1.2.1.39 | rdbmsMIB | 4 | 182 | The MIB module to describe objects for generic relational databases. |
| 1.3.6.1.2.1.40 | flowMIB | 4 | 125 | MIB for the RTFM Traffic Flow Meter. |
| 1.3.6.1.2.1.41 | snaDLC | 1 | 167 | This is the MIB module for objects used to manage SDLC devices. |
| 1.3.6.1.2.1.42 | dot5SrMIB | 2 | 12 | The MIB module for managing source routes in end-stations on IEEE 802.5 Token Ring networks. |
| 1.3.6.1.2.1.43 | printmib, current-printing-job-pages-printed, parsed-jobs-waiting-to-be-printed, copier-media-type, copier-collation, device-entry, cancel-job, copier-job-quality, copier-margin-shift, default-copier-media-size, copier-quality, copier-job-reduction, copier-num-copies, copier-special-features, copier-color-adjust, copier-pixel-data-type, event-log-table, print-queueing-mode-active, hold-job-timeout, copier-print-page-count, copier-job-num-copies, copier-reduction-maximum, stored-job-list-order, copier-contrast, active-job-status, status-jobs-active, enable-jobheldtimeout-for-stored-jobs, copier-job-media-size, print-nesting-mode-active, copier-reduction, copier-resolution, firmware-download-write-status-supported, copier-job-contrast, copier-enlargement-maximum, os-execute-file, copier-adf-page-count, scan-to-printer, copier-job-collation, copier-photo-mode, device-color-copy-request, default-copier-image-type, name-job-status, job-info-change-id, release-held-job | 19 | 295 | The MIB module for management of printers. |
| 1.3.6.1.2.1.44 | mipMIB | 3 | 268 | The MIB Module for the Mobile IP. |
| 1.3.6.1.2.1.45 | dot12MIB | 0 | 0 | IEEE 802.12 MIB |
| 1.3.6.1.2.1.46 | dlswMIB, vrrp, dlsw | 3 | 358 | This MIB module contains objects to manage Data Link Switches. |
| 1.3.6.1.2.1.47 | entityMIB | 3 | 78 | The MIB module for representing multiple logical entities supported by a single SNMP agent. Copyright (C) The Internet Society (2… |
| 1.3.6.1.2.1.48 | ipMIB | 2 | 68 | The MIB module for managing IP and ICMP implementations, but excluding their management of IP routes. Copyright (C) The Internet … |
| 1.3.6.1.2.1.49 | tcpMIB | 1 | 10 | The MIB module for managing TCP implementations. Copyright (C) The Internet Society (2005). This version of this MIB module is a … |
| 1.3.6.1.2.1.50 | udpMIB | 1 | 9 | The MIB module for managing UDP implementations. Copyright (C) The Internet Society (2005). This version of this MIB module is p… |
| 1.3.6.1.2.1.51 | rsvp | 4 | 172 | The MIB module to describe the RSVP Protocol |
| 1.3.6.1.2.1.52 | intSrv | 5 | 71 | The MIB module to describe the Integrated Services Protocol |
| 1.3.6.1.2.1.53 | vgRptrMIB | 3 | 96 | This MIB module describes objects for managing IEEE 802.12 repeaters. |
| 1.3.6.1.2.1.54 | sysApplMIB | 3 | 90 | The MIB module defines management objects that model applications as collections of executables and files installed and executing… |
| 1.3.6.1.2.1.55 | ipv6MIB | 3 | 96 | The MIB module for entities implementing the IPv6 protocol. |
| 1.3.6.1.2.1.56 | ipv6IcmpMIB | 2 | 42 | The MIB module for entities implementing the ICMPv6. |
| 1.3.6.1.2.1.57 | marsMIB | 5 | 209 | This module defines a portion of the managed information base (MIB) for managing classical IP multicast address resolution server… |
| 1.3.6.1.2.1.58 | perfHistTCMIB | 0 | 0 | This MIB Module provides Textual Conventions to be used by systems supporting 15 minute based performance history counts. |
| 1.3.6.1.2.1.59 | atmAccountingInformationMIB | 1 | 68 | The MIB module for identifying items of accounting information which are applicable to ATM connections. |
| 1.3.6.1.2.1.60 | accountingControlMIB | 3 | 53 | The MIB module for managing the collection and storage of accounting information for connections in a connection- oriented networ… |
| 1.3.6.1.2.1.61 | iANATn3270eTCMIB | 0 | 0 | IANATn3270eTCMIB |
| 1.3.6.1.2.1.62 | applicationMib | 2 | 169 | This MIB defines objects representing generic aspects of applications that are of interest to management but typically require in… |
| 1.3.6.1.2.1.63 | schedMIB | 3 | 38 | This MIB module defines a MIB which provides mechanisms to schedule SNMP set operations periodically or at specific points in tim… |
| 1.3.6.1.2.1.64 | scriptMIB | 3 | 93 | This MIB module defines a set of objects that allow to delegate management scripts to distributed managers. |
| 1.3.6.1.2.1.65 | wwwMIB | 2 | 98 | This WWW service MIB module is applicable to services realized by a family of 'Document Transfer Protocols' (DTP). Examples of DT… |
| 1.3.6.1.2.1.66 | dsMIB | 4 | 57 | The MIB module for monitoring Directory Services. |
| 1.3.6.1.2.1.67 | radiusMIB | 2 | 230 | The OID assigned to RADIUS MIB work by the IANA. |
| 1.3.6.1.2.1.68 | vrrpMIB | 4 | 114 | This MIB describes objects used for managing Virtual Router Redundancy Protocol (VRRP) routers. |
| 1.3.6.1.2.1.69 | docsDev | 6 | 347 | This is the MIB Module for MCNS-compliant cable modems and cable-modem termination systems. |
| 1.3.6.1.2.1.70 | etherChipsetMIB | 0 | 0 | This MIB module contains registered values for use by the dot3StatsEtherChipSet object in the EtherLike-MIB. This object is used… |
| 1.3.6.1.2.1.71 | nhrpMIB | 2 | 166 | This MIB contains managed object definitions for the Next Hop Resolution Procol, NHRP, as defined in RFC 2332 [17]. |
| 1.3.6.1.2.1.72 | ianaAddressFamily, ianaAddressFamilyNumbers | 0 | 0 | The MIB module defines the AddressFamilyNumbers textual convention. |
| 1.3.6.1.2.1.73 | ianalanguagemib, ianaLanguages | 7 | 7 | IANA Language MIB |
| 1.3.6.1.2.1.74 | agentxMIB | 2 | 45 | This is the MIB module for the SNMP Agent Extensibility Protocol (AgentX). This MIB module will be implemented by the master age… |
| 1.3.6.1.2.1.75 | fcFeMIB | 2 | 132 | The MIB module for Fibre Channel Fabric Element. |
| 1.3.6.1.2.1.76 | inetAddressMIB | 0 | 0 | This MIB module defines textual conventions for representing Internet addresses. An Internet address can be an IPv4 address, an … |
| 1.3.6.1.2.1.77 | ifInvertedStackMIB | 1 | 9 | The MIB module which provides the Inverted Stack Table for interface sub-layers. |
| 1.3.6.1.2.1.78 | hcnumTC | 0 | 0 | A MIB module containing textual conventions for high capacity data types. This module addresses an immediate need for data types … |
| 1.3.6.1.2.1.79 | ptopoMIB | 4 | 50 | The MIB module for physical topology information. |
| 1.3.6.1.2.1.80 | pingMIB | 4 | 68 | The Ping MIB (DISMAN-PING-MIB) provides the capability of controlling the use of the ping function at a remote host. |
| 1.3.6.1.2.1.81 | traceRouteMIB | 4 | 84 | The Traceroute MIB (DISMAN-TRACEROUTE-MIB) provides access to the traceroute capability at a remote host. |
| 1.3.6.1.2.1.82 | lookupMIB | 2 | 26 | The Lookup MIB (DISMAN-NSLOOKUP-MIB) enables determination of either the name(s) corresponding to a host address or of the addres… |
| 1.3.6.1.2.1.83 | ipMRouteStdMIB | 2 | 72 | The MIB module for management of IP Multicast routing, but independent of the specific multicast routing protocol in use. |
| 1.3.6.1.2.1.84 | ianaipRouteProtocolMIB, ianaRtProtoMIB | 0 | 0 | This MIB module defines the IANAipRouteProtocol and IANAipMRouteProtocol textual conventions for use in MIBs which need to identi… |
| 1.3.6.1.2.1.85 | igmpStdMIB | 2 | 54 | The MIB module for IGMP Management. |
| ... | ||||