Reference record for OID 1.3.6.1.2.1.40.1.7


parent
1.3.6.1.2.1.40.1 (flowControl)
node code
7
node name
flowActiveFlows
dot oid
1.3.6.1.2.1.40.1.7
type
OBJECT-TYPE
asn1 oid
  • {iso(1) identified-organization(3) dod(6) internet(1) mgmt(2) mib-2(1) flowMIB(40) flowControl(1) flowActiveFlows(7)}
  • {iso(1) identified-organization(3) dod(6) internet(1) mgmt(2) mib(1) flowMIB(40) flowControl(1) flowActiveFlows(7)}
  • {iso(1) org(3) dod(6) internet(1) mgmt(2) mib-2(1) flowMIB(40) flowControl(1) flowActiveFlows(7)}
  • {iso(1) org(3) dod(6) internet(1) mgmt(2) mib(1) flowMIB(40) flowControl(1) flowActiveFlows(7)}
  • {iso(1) iso-identified-organization(3) dod(6) internet(1) mgmt(2) mib-2(1) flowMIB(40) flowControl(1) flowActiveFlows(7)}
  • {iso(1) iso-identified-organization(3) dod(6) internet(1) mgmt(2) mib(1) flowMIB(40) flowControl(1) flowActiveFlows(7)}
  • iri oid
  • /iso/identified-organization/dod/internet/mgmt/mib-2/flowMIB/flowControl/flowActiveFlows
  • /iso/identified-organization/dod/internet/mgmt/mib/flowMIB/flowControl/flowActiveFlows
  • /iso/org/dod/internet/mgmt/mib-2/flowMIB/flowControl/flowActiveFlows
  • /iso/org/dod/internet/mgmt/mib/flowMIB/flowControl/flowActiveFlows
  • /iso/iso-identified-organization/dod/internet/mgmt/mib-2/flowMIB/flowControl/flowActiveFlows
  • /iso/iso-identified-organization/dod/internet/mgmt/mib/flowMIB/flowControl/flowActiveFlows
  • iri by oid_info
    /ISO/Identified-Organization/6/1/2/1/40/1/7

    Description by oid_info

    flowActiveFlows OBJECT-TYPE
    SYNTAX Integer32
    MAX-ACCESS read-only
    STATUS current
    DESCRIPTION
    "The number of flows which are currently in use."

    View at oid-info.com

    Description by mibdepot

    The number of flows which are currently in use.

    Parsed from file rfc2720-Traffic-Flow-Measurement---Meter.mib.txt
    Company: None
    Module: FLOW-METER-MIB

    Description by circitor

    The number of flows which are currently in use.

    Parsed from file FLOW-METER-MIB.mib
    Module: FLOW-METER-MIB

    Information by oid_info

    Automatically extracted from RFC2720

    Information by mibdepot

    flowActiveFlows OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of flows which are currently in use." ::= { flowControl 7 }

    Information by circitor

    flowActiveFlows OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of flows which are currently in use." ::= { flowControl 7 }

    First Registration Authority (recovered by parent 1.3.6)

    Defense Communication Agency

    Current Registration Authority (recovered by parent 1.3.6.1.2)

    Internet Assigned Numbers Authority

    Children (1)

    OIDNameSub childrenSub Nodes TotalDescription
    1.3.6.1.2.1.40.1.7.0 flowActiveFlows 0 0 None

    Brothers (8)

    OIDNameSub childrenSub Nodes TotalDescription
    1.3.6.1.2.1.40.1.1 flowRuleSetInfoTable 1 9 An array of information about the RuleSets held in the
    meter.

    Any manager may configure a new RuleSet for the meter by
    creating a …
    1.3.6.1.2.1.40.1.2 flowInterfaceTable 1 3 An array of information specific to each meter interface.
    1.3.6.1.2.1.40.1.3 flowReaderInfoTable 1 8 An array of information about meter readers which have
    registered their intent to collect flow data from this meter.
    1.3.6.1.2.1.40.1.4 flowManagerInfoTable 1 10 An array of information about managers which have
    registered their intent to run RuleSets on this meter.
    1.3.6.1.2.1.40.1.5 flowFloodMark 1 1 A value expressed as a percentage, interpreted by the meter
    as an indication of how full the flow table should be before
    it shoul…
    1.3.6.1.2.1.40.1.6 flowInactivityTimeout 1 1 The time in seconds since the last packet seen, after which
    a flow becomes 'idle.' Note that although a flow may be
    idle, it wil…
    1.3.6.1.2.1.40.1.8 flowMaxFlows 1 1 The maximum number of flows allowed in the meter's
    flow table. At present this is determined when the meter
    is first started up.
    1.3.6.1.2.1.40.1.9 flowFloodMode 1 1 Indicates that the meter has passed its FloodMark and is
    not running in its normal mode.

    When the manager notices this it should …