Enabling known mode for this switch port causes the port to
safely discard frames flooded because they are unknown unicast
frames. This mode greatly enhances the efficiency of the port's
output buffer since space is not wasted for frames not meant for
this port.
Enabling this feature disables learning for this port.
Addresses associated for this port should be entered statically.
The default is disable.
Parsed from file marconi-esr.mib.txt
Company: marconi
Module: MARCONI-ESR-MIB
Vendor: Marconi
Module: MARCONI-ESR-MIB (marconi-esr.mib)
Type: TABULAR
Access: read-write
Syntax: INTEGER
Automatically extracted from www.mibdepot.com
esrSwitchPortKnownMode OBJECT-TYPE SYNTAX INTEGER { enable(1), disable(2) } ACCESS read-write STATUS mandatory DESCRIPTION "Enabling known mode for this switch port causes the port to safely discard frames flooded because they are unknown unicast frames. This mode greatly enhances the efficiency of the port's output buffer since space is not wasted for frames not meant for this port. Enabling this feature disables learning for this port. Addresses associated for this port should be entered statically. The default is disable." ::= { esrSwitchPortEntry 7 }
| OID | Name | Sub children | Sub Nodes Total | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.1012.81.1.5.2.1.1.1 | esrSwitchPortIndex | 0 | 0 | A unique index that identifies this switch port. The value of this index corresponds to the value of the esrResourceIndex for sw… |
| 1.3.6.1.4.1.1012.81.1.5.2.1.1.2 | esrSwitchPortSTAPMode | 0 | 0 | Disabling spanning tree on a switch port prevents the switch port from participating in the spanning tree process. When disabled… |
| 1.3.6.1.4.1.1012.81.1.5.2.1.1.3 | esrSwitchPortConvertToStatic | 0 | 0 | When this object is set to convertToStatic(2), all addresses learned on this port will be added to the non-volatile version of th… |
| 1.3.6.1.4.1.1012.81.1.5.2.1.1.4 | esrSwitchPortLearningMode | 0 | 0 | Disable learning on a bridge port to prevent new addresses from being added to the address database. Used in combination with st… |
| 1.3.6.1.4.1.1012.81.1.5.2.1.1.5 | esrSwitchPortHuntGroup | 0 | 0 | Hunt groups provide the capability to logically bind multiple switch ports into one switch port. This provides a way of balancin… |
| 1.3.6.1.4.1.1012.81.1.5.2.1.1.6 | esrSwitchPortPhysicalPort | 0 | 0 | The physical port resource bound to this switch port. |
| 1.3.6.1.4.1.1012.81.1.5.2.1.1.8 | esrSwitchPortMappingMethod | 0 | 0 | The frame mapping method of this switch port. When set to port-based(1) (the factory default), all non-tagged frames are classif… |
| 1.3.6.1.4.1.1012.81.1.5.2.1.1.9 | esrSwitchPortTrunkingMode | 0 | 0 | The trunking mode of this port. All frames transmitted out this switch port are translated to the appropriate trunking format: Cl… |
| 1.3.6.1.4.1.1012.81.1.5.2.1.1.10 | esrSwitchPortVlanBindingMethod | 0 | 0 | The VLAN binding method of a switch port specifies the way in which the port can be a member of the egress lists of VLANs other t… |
| 1.3.6.1.4.1.1012.81.1.5.2.1.1.11 | esrSwitchPortIgnoreTag | 0 | 0 | Each switch port is capable of ignoring the VLAN Tag associated with a frame in a trunking format. When ignored, the tag is used… |
| 1.3.6.1.4.1.1012.81.1.5.2.1.1.12 | esrSwitchPortVlanID | 0 | 0 | When this switch port is configured in port-based VLAN mode, all non-tagged frames received on this port are bound to this VLAN. … |
| 1.3.6.1.4.1.1012.81.1.5.2.1.1.13 | esrSwitchPort3ComMappingTableIndex | 0 | 0 | The 3Com VLAN mapping table associated with this switch port. The default is 1, which indicates the default mapping table. |
| 1.3.6.1.4.1.1012.81.1.5.2.1.1.14 | esrSwitchPortAutoVlanCreation | 0 | 0 | Enabling auto VLAN creation for this switch port causes the port to dynamically create a VLAN whenever an IEEE 802.1Q or Multi-le… |
| 1.3.6.1.4.1.1012.81.1.5.2.1.1.15 | esrSwitchPortMirrorMode | 0 | 0 | When set to enable(1), this object indicates that the port is defined as a mirror port through the esrPortMirroringTable. A mirr… |
| 1.3.6.1.4.1.1012.81.1.5.2.1.1.16 | esrSwitchPortIfIndex | 0 | 0 | Each switch port is associated with an interface. This object provides a mechanism to map switch ports to bridge ports. |
| 1.3.6.1.4.1.1012.81.1.5.2.1.1.17 | esrSwitchPortFastStart | 0 | 0 | When this object is set to enable(1), bridge ports on this switch port transitions right from blocking to forwarding, skipping t… |
| 1.3.6.1.4.1.1012.81.1.5.2.1.1.18 | esrSwitchPortVtpSnooping | 0 | 0 | When this object is set to enable(1), this switch port attempts to learn VLANs from a major networking equipment vendor if the s… |