Vendor: SAGEM
Module: SAT-MEGA-MIB
[Automatically extracted from oidview.com]
base OBJECT IDENTIFIER ::= { mega 2 }
base OBJECT IDENTIFIER ::= { mega 2 }
OID | Name | Sub children | Sub Nodes Total | Description |
---|---|---|---|---|
1.3.6.1.4.1.1038.4.2.1 | baseVersion | 1 | 1 | Software Version. The software version currently running. Defined as YMMR (i.e. Year, Month, Revision |
1.3.6.1.4.1.1038.4.2.2 | baseRestartTime | 1 | 1 | BASE Restart Time. The time and data of the last system restart (i.e. power-on or last BOOT) |
1.3.6.1.4.1.1038.4.2.3 | baseMaxPacketSize | 1 | 1 | Node Maximum Packet Size. The maximum single buffer size available on the MegaPAC. |
1.3.6.1.4.1.1038.4.2.4 | baseBuffPoolMax | 1 | 1 | Node Buffer Pool Maximum. The maximum number of buffers available temporary storage of transitting data. |
1.3.6.1.4.1.1038.4.2.5 | baseBuffPoolNow | 1 | 1 | Node Current Buffer Pool. The current number of free buffers available temporary storage of transitting data. |
1.3.6.1.4.1.1038.4.2.6 | baseBufferPoolLowest | 1 | 1 | Node Buffer Pool Lowest. The lowest value the buffer pool has ever reached. |
1.3.6.1.4.1.1038.4.2.7 | baseBufferPoolEmpty | 1 | 1 | Node Buffer Pool Empty. The number of times that the free buffer pool has fallen below the minimum buffer threshold 'baseBuffThre… |
1.3.6.1.4.1.1038.4.2.8 | baseStatBufferThreshold | 1 | 1 | Node Buffer Threshold. When the number of buffers in the free buffer pool reaches this threshold, flow control will occur. |
1.3.6.1.4.1.1038.4.2.9 | baseMemorySize | 1 | 1 | Node Memory Size. The size of the system memory installed in the MegaPAC. |
1.3.6.1.4.1.1038.4.2.10 | baseDataFramesIn | 1 | 1 | Node Frames In. The total number of frames received by the MegaPAC. |
1.3.6.1.4.1.1038.4.2.11 | baseDataFramesOut | 1 | 1 | Node Frames Out. The total number of frames transmitted by the MegaPAC. |
1.3.6.1.4.1.1038.4.2.12 | baseDataFrameRateIn | 1 | 1 | Node Frame Rate In. The rate measured in frames per second that the MegaPAC is currently receiving frames. |
1.3.6.1.4.1.1038.4.2.13 | baseDataFrameRateOut | 1 | 1 | Node Frames Rate Out. The rate measured in frames per second that the MegaPAC is currently transmitting frames. |
1.3.6.1.4.1.1038.4.2.14 | baseTotalCallSetUps | 1 | 1 | Node Total Call Set ups. The total number of calls successfully established by the MegaPAC. |
1.3.6.1.4.1.1038.4.2.15 | baseCurrentCalls | 1 | 1 | Current calls. The number of calls currently active on the MegaPAC. |
1.3.6.1.4.1.1038.4.2.16 | baseRetransmissions | 1 | 1 | Node Retransmissions. The total number of frames which have been retransmitted by the MegaPAC. |
1.3.6.1.4.1.1038.4.2.17 | baseRejects | 1 | 1 | Node Rejects. The total number of frames that have been rejected by the MegaPAC. |
1.3.6.1.4.1.1038.4.2.18 | baseTotalTransportCalls | 1 | 1 | Node Total Transport calls. The total number of transport calls established by the MegaPAC. |
1.3.6.1.4.1.1038.4.2.19 | baseCurrentTransportCalls | 1 | 1 | Current Transport Calls. The number of transport calls currently active on the MegaPAC. |
1.3.6.1.4.1.1038.4.2.20 | baseRunStatus | 1 | 1 | Node Run Status. This parameter indicates whether the operating system has been 'Booted' from RAM (TELELOAD) or EPROM (default). |
1.3.6.1.4.1.1038.4.2.21 | baseReports | 1 | 1 | Node Reporting channel. The name of the logical resource (channel) that the system reports will be directed to. |
1.3.6.1.4.1.1038.4.2.22 | baseSessionStatistics | 1 | 1 | Node Session Statistics reporting channel. The name of the logical resource (channel) that the system session statistics will be … |
1.3.6.1.4.1.1038.4.2.23 | baseBufferThreshold | 1 | 1 | Node Buffer Threshold. The threshold before flow control is invoked |
1.3.6.1.4.1.1038.4.2.24 | baseInitialPresentationTimer | 1 | 1 | Node Initial Presentation Timer. The maximum time allowed between initial connection to the presentation service and the user ent… |
1.3.6.1.4.1.1038.4.2.25 | baseSecondaryPresentationTimer | 1 | 1 | Node Secondary Presentation Timer. After a call has been cleared by the Host DTE the user has the option to use the presentation … |
1.3.6.1.4.1.1038.4.2.26 | baseInactivityDetectTimer | 1 | 1 | Node Inactivity Timer. This timer will cause calls to be cleared if the IDLE option has been configured on the channel. |
1.3.6.1.4.1.1038.4.2.27 | baseSegmentAccounting | 1 | 1 | Node Segment Accounting. This parameter causes the frames in/out parameters to be displayed in terms of 64 byte SEGMENTS rather t… |
1.3.6.1.4.1.1038.4.2.28 | baseTerminalEmulationBuffers | 1 | 1 | Terminal Emulation Buffers. The number of system buffers allocated for Terminal Emulation purposes. |
1.3.6.1.4.1.1038.4.2.29 | baseTransportBuffers | 1 | 1 | Transport Buffers. The number of transport buffers allocated for TP 0,2,3,4 sessions. |
1.3.6.1.4.1.1038.4.2.30 | baseCountrySettings | 1 | 1 | Country Setting. Invokes the ASCII representation of the Japanese character set. |
1.3.6.1.4.1.1038.4.2.31 | baseTeleloadEnabled | 1 | 1 | Teleload enable. If set to yes the MegaPAC software may be downloaded by ASCII file transfer. |
1.3.6.1.4.1.1038.4.2.32 | baseDefaultToPromCompatible | 1 | 1 | Cold Boot From PROM. If set to yes the MegaPAC software may be downloaded by ASCII file transfer. |
OID | Name | Sub children | Sub Nodes Total | Description |
---|---|---|---|---|
1.3.6.1.4.1.1038.4.1 | products | 7 | 7 | None |
1.3.6.1.4.1.1038.4.3 | controller | 4 | 125 | None |
1.3.6.1.4.1.1038.4.4 | channel | 3 | 141 | None |
1.3.6.1.4.1.1038.4.5 | x25File | 2 | 9 | None |
1.3.6.1.4.1.1038.4.6 | nameFile | 2 | 10 | None |
1.3.6.1.4.1.1038.4.7 | passFile | 1 | 2 | None |
1.3.6.1.4.1.1038.4.8 | macFile | 2 | 10 | None |
1.3.6.1.4.1.1038.4.9 | ilanFile | 2 | 9 | None |
1.3.6.1.4.1.1038.4.10 | elogFile | 2 | 6 | None |
1.3.6.1.4.1.1038.4.11 | billFile | 2 | 22 | None |