Setting this object to reset(3) clears all
address table entries for this port as well as
setting all port traffic counters to zero and
setting hpEsPortResetTimer to zero.
Parsed from file hp-switch.mib.txt
Company: None
Module: HPSWITCH-MIB
Setting this object to reset(3) clears all
address table entries for this port as well as
setting all port traffic counters to zero and
setting hpEsPortResetTimer to zero.
Parsed from file HPSWITCH-MIB.mib
Module: HPSWITCH-MIB
Vendor: HP
Module: HPSWITCH-MIB (hp-switch.mib)
Type: TABULAR
Access: read-write
Syntax: INTEGER
Automatically extracted from www.mibdepot.com
hpEsPortResetAddrs OBJECT-TYPE SYNTAX INTEGER { other(1), running(2), reset(3) } ACCESS read-write STATUS mandatory DESCRIPTION "Setting this object to reset(3) clears all address table entries for this port as well as setting all port traffic counters to zero and setting hpEsPortResetTimer to zero." ::= { hpEsPortEntry 18 }
hpEsPortResetAddrs OBJECT-TYPE SYNTAX INTEGER { other(1), running(2), reset(3) } ACCESS read-write STATUS mandatory DESCRIPTION "Setting this object to reset(3) clears all address table entries for this port as well as setting all port traffic counters to zero and setting hpEsPortResetTimer to zero." ::= { hpEsPortEntry 18 }
OID | Name | Sub children | Sub Nodes Total | Description |
---|---|---|---|---|
1.3.6.1.4.1.11.2.14.6.1.3.1.1.1 | hpEsPortIndex | 0 | 0 | A unique value for each port entry. The value corresponds the port number. |
1.3.6.1.4.1.11.2.14.6.1.3.1.1.2 | hpEsPortOprStatus | 0 | 0 | The operational status of the port. Setting to enabled(1) enables the port. Setting to disabled(2) disables the port. The valu… |
1.3.6.1.4.1.11.2.14.6.1.3.1.1.5 | hpEsPortExtConn | 0 | 0 | Which external connector has been configured via jumpers. For EPS1500, this object will always return AUI. |
1.3.6.1.4.1.11.2.14.6.1.3.1.1.6 | hpEsPortDuplex | 0 | 0 | Indicates whether the port is jumper configured for full or half duplex operation. Note: internal connected ports are always half… |
1.3.6.1.4.1.11.2.14.6.1.3.1.1.7 | hpEsPortRcvLocalFrames | 0 | 0 | Number of frames received where the destination is on this port. |
1.3.6.1.4.1.11.2.14.6.1.3.1.1.8 | hpEsPortForwardedFrames | 0 | 0 | Number of frames received on this port and forwarded to another port. |
1.3.6.1.4.1.11.2.14.6.1.3.1.1.10 | hpEsPortMostStations | 0 | 0 | Highest number of stations ever active at any time since the last reset of the switch as seen by this port. |
1.3.6.1.4.1.11.2.14.6.1.3.1.1.11 | hpEsPortMaxStations | 0 | 0 | Maximum number of stations which the port can support simultaneously. |
1.3.6.1.4.1.11.2.14.6.1.3.1.1.12 | hpEsPortSWHandledFrames | 0 | 0 | Number of Frames received on this port and delivered to the system module for processing. |
1.3.6.1.4.1.11.2.14.6.1.3.1.1.13 | hpEsPortLocalStations | 0 | 0 | Number of stations on this port which belong to the local segment. |
1.3.6.1.4.1.11.2.14.6.1.3.1.1.14 | hpEsPortRemoteStations | 0 | 0 | Number of stations on this port which belong to another segment. |
1.3.6.1.4.1.11.2.14.6.1.3.1.1.15 | hpEsPortUnknownStaFrames | 0 | 0 | Number of unicast frames received on this port and forwarded to the system module for processing because the source or destinatio… |
1.3.6.1.4.1.11.2.14.6.1.3.1.1.16 | hpEsPortResetStats | 0 | 0 | Setting this object to reset(3) causes all traffic counters for this port to be set to zero. Also the value of hpEsPortResetTimer… |
1.3.6.1.4.1.11.2.14.6.1.3.1.1.17 | hpEsPortResetTimer | 0 | 0 | Time (in 100th second ticks) since the port counters were reset. |
1.3.6.1.4.1.11.2.14.6.1.3.1.1.20 | hpEsPortRcvBcasts | 0 | 0 | Number of Broadcast Frames received on this port without errors. |
1.3.6.1.4.1.11.2.14.6.1.3.1.1.25 | hpEsPortSwitchedFrames | 0 | 0 | Number of frames switched on this port |