The number of seconds that a router's Hello packets
have not been seen before it's neighbors declare the
router down. This should be some multiple of the Hello
interval. This value must be the same for the virtual
neighbor.
Parsed from file hp-sn-ospf.mib.txt
Company: None
Module: HP-SN-OSPF-GROUP-MIB
The number of seconds that a router's Hello packets
have not been seen before it's neighbors declare the
router down. This should be some multiple of the Hello
interval. This value must be the same for the virtual
neighbor.
Parsed from file HP-SN-OSPF-GROUP-MIB.mib
Module: HP-SN-OSPF-GROUP-MIB
Vendor: Hewlett-Packard
Module: HP-SN-OSPF-GROUP-MIB
[Automatically extracted from oidview.com]
snOspfVirtIfRtrDeadInterval OBJECT-TYPE SYNTAX PositiveInteger ACCESS read-write STATUS mandatory DESCRIPTION "The number of seconds that a router's Hello packets have not been seen before it's neighbors declare the router down. This should be some multiple of the Hello interval. This value must be the same for the virtual neighbor." DEFVAL { 60 } ::= { snOspfVirtIfEntry 6 }
snOspfVirtIfRtrDeadInterval OBJECT-TYPE SYNTAX PositiveInteger ACCESS read-write STATUS mandatory DESCRIPTION "The number of seconds that a router's Hello packets have not been seen before it's neighbors declare the router down. This should be some multiple of the Hello interval. This value must be the same for the virtual neighbor." DEFVAL { 60 } ::= { snOspfVirtIfEntry 6 }
OID | Name | Sub children | Sub Nodes Total | Description |
---|---|---|---|---|
1.3.6.1.4.1.11.2.3.7.11.12.2.4.5.1.1.1 | snOspfVirtIfAreaID | 0 | 0 | The Transit Area that the Virtual Link traverses. By definition, this is not 0.0.0.0 |
1.3.6.1.4.1.11.2.3.7.11.12.2.4.5.1.1.2 | snOspfVirtIfNeighbor | 0 | 0 | The Router ID of the Virtual Neighbor. |
1.3.6.1.4.1.11.2.3.7.11.12.2.4.5.1.1.3 | snOspfVirtIfTransitDelay | 0 | 0 | snOspfVirtIftransitDelay |
1.3.6.1.4.1.11.2.3.7.11.12.2.4.5.1.1.4 | snOspfVirtIfRetransInterval | 0 | 0 | The number of seconds between link-state advertisement retransmissions, for adjacencies belonging to this interface. This value … |
1.3.6.1.4.1.11.2.3.7.11.12.2.4.5.1.1.5 | snOspfVirtIfHelloInterval | 0 | 0 | The length of time, in seconds, between the Hello packets that the router sends on the interface. This value must be the same fo… |
1.3.6.1.4.1.11.2.3.7.11.12.2.4.5.1.1.7 | snOspfVirtIfAuthType | 0 | 0 | snOspfVirtIfAuthtype |
1.3.6.1.4.1.11.2.3.7.11.12.2.4.5.1.1.8 | snOspfVirtIfAuthKey | 0 | 0 | If Authentication Type is simplePassword, the device will left adjust and zero fill to 8 octets. When read, snOspfVifAuthKey alwa… |
1.3.6.1.4.1.11.2.3.7.11.12.2.4.5.1.1.9 | snOspfVirtIfRowStatus | 0 | 0 | This object is used to create and delete row in the table and control if they are used. The values that can be written are: delete(… |
1.3.6.1.4.1.11.2.3.7.11.12.2.4.5.1.1.10 | snOspfVirtIfMd5AuthKeyId | 0 | 0 | The md5 authentication key ID. If the snOspfVirtIfAuthType is set to md5, the value of snOspfVirtIfMd5AuthKeyId must be (1 to 25… |
1.3.6.1.4.1.11.2.3.7.11.12.2.4.5.1.1.11 | snOspfVirtIfMd5AuthKey | 0 | 0 | The MD5 Authentication Key. If the Area's Authorization Type is md5, and the key length is shorter than 16 octets, the agent wil… |
1.3.6.1.4.1.11.2.3.7.11.12.2.4.5.1.1.12 | snOspfVirtIfMd5ActivationWaitTime | 0 | 0 | The md5 authentication key activation wait time is specified in second and the maximum wait time is 14400 seconds (4 hours). |
1.3.6.1.4.1.11.2.3.7.11.12.2.4.5.1.1.13 | snOspfVirtIfAreaIdFormat | 0 | 0 | This object is used to specify whether AreaId is represented as IP Address or an Integer. The values that can be written are: integ… |