The value of prtInputIndex corresponding to the input
subunit which will be used when this input subunit is emptied and
the timeout specified by prtInputMediaLoadTimeout expires. A
value of zero(0) indicates that auto input switching will not
occur when this input subunit is emptied. If the timeout
specified by prtInputLoadMediaTimeout expires and this value is
zero(0), the job will be aborted. A value of (-1) means other.
The value (-2) means 'unknown' and specifically indicates that an
implementation specific method will determine the next input
subunit to use at the time this subunit is emptied and the
timeout expires. The value(-3) means input switching is not
supported for this subunit.
Additional information:
This object reflects the state of JOB-INPUT-AUTO-CONTINUE-MODE
and JOB-INPUT-AUTO-CONTINUE-TIMEOUT. If
JOB-INPUT-AUTO-CONTINUE-TIMEOUT is set to -1 or
JOB-INPUT-AUTO-CONTINUE-MODE is set up to cancel the job,
this object will return 0. If JOB-INPUT-AUTO-CONTINUE-TIMEOUT
is >= 0 and JOB-INPUT-AUTO-CONTINUE-MODE is not set up to
cancel the job, this object will return -2, meaning that
a product-specific tray switching action will occur.
Parsed from file lj4100mfp_beta.mib.txt
Company: None
Module: LJ4100mfp-MIB
The value of prtInputIndex corresponding to the input
subunit which will be used when this input subunit is emptied and
the timeout specified by prtInputMediaLoadTimeout expires. A
value of zero(0) indicates that auto input switching will not
occur when this input subunit is emptied. If the timeout
specified by prtInputLoadMediaTimeout expires and this value is
zero(0), the job will be aborted. A value of (-1) means other.
The value (-2) means 'unknown' and specifically indicates that an
implementation specific method will determine the next input
subunit to use at the time this subunit is emptied and the
timeout expires. The value(-3) means input switching is not
supported for this subunit.
Refer to ftp://ftp.pwg.org/pub/pwg/pmp/drafts/pmib_031698.txt, for more details in the Standard Printer MIB.
Additional information:
This object reflects the state of
JOB-INPUT-AUTO-CONTINUE -MODE and
JOB-INPUT-AUTO-CONTINUE-TIMEOUT. If
JOB-INPUT-AUTO-CONTINUE-TIMEOUT is set to -1 or
JOB-INPUT-AUTO-CONTINUE-MODE is set up to cancel the
job, this object will return 0. If
JOB-INPUT-AUTO-CONTINUE-TIMEOUT is >= 0 and
JOB-INPUT-AUTO-CONTINUE-MODE is not set up to
cancel the job, this object will return -2, meaning that
a product-specific tray switching action will occur.
Parsed from file LaserJet-Series8000-MIB.mib
Module: LaserJet-Series8000-MIB
Vendor: Hewlett-Packard
Module: HP-Color-LaserJet-4500-MIB
[Automatically extracted from oidview.com]
prtinputnextindex OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS optional DESCRIPTION "The value of prtInputIndex corresponding to the input subunit which will be used when this input subunit is emptied and the timeout specified by prtInputMediaLoadTimeout expires. A value of zero(0) indicates that auto input switching will not occur when this input subunit is emptied. If the timeout specified by prtInputLoadMediaTimeout expires and this value is zero(0), the job will be aborted. A value of (-1) means other. The value (-2) means 'unknown' and specifically indicates that an implementation specific method will determine the next input subunit to use at the time this subunit is emptied and the timeout expires. The value(-3) means input switching is not supported for this subunit. Additional information: This object reflects the state of JOB-INPUT-AUTO-CONTINUE-MODE and JOB-INPUT-AUTO-CONTINUE-TIMEOUT. If JOB-INPUT-AUTO-CONTINUE-TIMEOUT is set to -1 or JOB-INPUT-AUTO-CONTINUE-MODE is set up to cancel the job, this object will return 0. If JOB-INPUT-AUTO-CONTINUE-TIMEOUT is >= 0 and JOB-INPUT-AUTO-CONTINUE-MODE is not set up to cancel the job, this object will return -2, meaning that a product-specific tray switching action will occur." ::= { prtInputEntry 26 }
prtinputnextindex OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS optional DESCRIPTION "The value of prtInputIndex corresponding to the input subunit which will be used when this input subunit is emptied and the timeout specified by prtInputMediaLoadTimeout expires. A value of zero(0) indicates that auto input switching will not occur when this input subunit is emptied. If the timeout specified by prtInputLoadMediaTimeout expires and this value is zero(0), the job will be aborted. A value of (-1) means other. The value (-2) means 'unknown' and specifically indicates that an implementation specific method will determine the next input subunit to use at the time this subunit is emptied and the timeout expires. The value(-3) means input switching is not supported for this subunit. Refer to ftp://ftp.pwg.org/pub/pwg/pmp/drafts/pmib_031698.txt, for more details in the Standard Printer MIB. Additional information: This object reflects the state of JOB-INPUT-AUTO-CONTINUE -MODE and JOB-INPUT-AUTO-CONTINUE-TIMEOUT. If JOB-INPUT-AUTO-CONTINUE-TIMEOUT is set to -1 or JOB-INPUT-AUTO-CONTINUE-MODE is set up to cancel the job, this object will return 0. If JOB-INPUT-AUTO-CONTINUE-TIMEOUT is >= 0 and JOB-INPUT-AUTO-CONTINUE-MODE is not set up to cancel the job, this object will return -2, meaning that a product-specific tray switching action will occur." ::= { prtInputEntry 26 }
OID | Name | Sub children | Sub Nodes Total | Description |
---|---|---|---|---|
1.3.6.1.4.1.11.2.3.9.4.2.2.8.2.1.26.0 | prtinputnextindex | 0 | 0 | None |
OID | Name | Sub children | Sub Nodes Total | Description |
---|---|---|---|---|
1.3.6.1.4.1.11.2.3.9.4.2.2.8.2.1.2 | prtinputtype | 1 | 1 | The type of technology (discriminated primarily according to feeder mechanism type) employed by the input sub-unit. Note, the Op… |
1.3.6.1.4.1.11.2.3.9.4.2.2.8.2.1.3 | prtinputdimunit | 1 | 1 | The unit of measurement for use calculating and relaying dimensional values for this input sub-unit. |
1.3.6.1.4.1.11.2.3.9.4.2.2.8.2.1.4 | prtinputmediadimfeeddirdeclared | 1 | 1 | This object provides the value of the declared dimension, in the feed direction, of the media that is (or, if empty, was or will … |
1.3.6.1.4.1.11.2.3.9.4.2.2.8.2.1.5 | prtinputmediadimxfeeddirdeclared | 1 | 1 | This object provides the value of the declared dimension, in the cross feed direction, of the media that is (or, if empty, was or… |
1.3.6.1.4.1.11.2.3.9.4.2.2.8.2.1.6 | prtinputmediadimfeeddirchosen | 1 | 1 | The printer will act as if media of the chosen dimension (in the feed direction) is present in this input source. Note that this… |
1.3.6.1.4.1.11.2.3.9.4.2.2.8.2.1.7 | prtinputmediadimxfeeddirchosen | 1 | 1 | The printer will act as if media of the chosen dimension (in the cross feed direction) is present in this input source. Note that… |
1.3.6.1.4.1.11.2.3.9.4.2.2.8.2.1.8 | prtinputcapacityunit | 1 | 1 | The unit of measurement for use in calculating and relaying capacity values for this input sub-unit. Additional information: A she… |
1.3.6.1.4.1.11.2.3.9.4.2.2.8.2.1.9 | prtinputmaxcapacity | 1 | 1 | The maximum capacity of the input sub-unit in input sub-unit capacity units (CapacityUnit). There is no convention associated wi… |
1.3.6.1.4.1.11.2.3.9.4.2.2.8.2.1.10 | prtinputcurrentlevel | 1 | 1 | The current capacity of the input sub-unit in input sub-unit capacity units (PrtCapacityUnitTC). If this input sub-unit can relia… |
1.3.6.1.4.1.11.2.3.9.4.2.2.8.2.1.11 | prtinputstatus | 1 | 1 | The current status of this input sub-unit. Refer to Internet Draft Printer MIB, expiring Sept. 1997 for more details. Additional … |
1.3.6.1.4.1.11.2.3.9.4.2.2.8.2.1.12 | prtinputmedianame | 1 | 1 | A description of the media contained in this input sub-unit; This description is intended for display to a human operator. This d… |
1.3.6.1.4.1.11.2.3.9.4.2.2.8.2.1.13 | prtinputname | 1 | 1 | The name assigned to this input sub-unit. |
1.3.6.1.4.1.11.2.3.9.4.2.2.8.2.1.14 | prtinputvendorname | 1 | 1 | The vendor name of this input sub-unit. |
1.3.6.1.4.1.11.2.3.9.4.2.2.8.2.1.15 | prtinputmodel | 1 | 1 | The model name of this input sub-unit. |
1.3.6.1.4.1.11.2.3.9.4.2.2.8.2.1.16 | prtinputversion | 1 | 1 | The version of this input sub-unit. |
1.3.6.1.4.1.11.2.3.9.4.2.2.8.2.1.17 | prtinputserialnumber | 1 | 1 | The serial number assigned to this input sub-unit. |
1.3.6.1.4.1.11.2.3.9.4.2.2.8.2.1.18 | prtinputdescription | 1 | 1 | A free-form text description of this input sub-unit in the localization specified by prtGeneralCurrentLocalization. |
1.3.6.1.4.1.11.2.3.9.4.2.2.8.2.1.19 | prtinputsecurity | 1 | 1 | Indicates if this input sub-unit has some security associated with it. Additional information: No security mechanism provided. |
1.3.6.1.4.1.11.2.3.9.4.2.2.8.2.1.24 | prtinputmedialoadtimeout | 1 | 1 | When the printer is not able to print due to a subunit being empty or the requested media must be manually loaded, the printer wi… |