This object provides the value of the declared dimension, in
the feed direction, of the media that is (or, if empty, was or
will be) in this input sub-unit. The feed direction is the
direction in which the media is fed on this sub-unit. This
dimension is measured in input sub-unit dimensional units
(prtInputDimUnit). If this input sub-unit can reliably sense
this value, the value is sensed by the printer and may not be
changed by management requests. Otherwise, the value may be
changed. The value (-1) means other and specifically means
that this sub-unit places no restriction on this parameter.
The value (-2) indicates unknown.
Refer to Internet Draft Printer MIB, expiring Sept. 1997 for more details.
Additional information:
The default values assume the trays are
configured for letter size paper. For tray 1 the value is
the dimension for the media size currently declared.
Valid values are 63000 to 140000 if prtInputDimUnit is
ePtenThousandthsOfInches and 160000 to 356000 if
prtInputDimUnit is ePmicrometers.
Parsed from file lj3200_snmp.mib.txt
Company: None
Module: LJ3200-MIB
This object provides the value of the declared dimension, in
the feed direction, of the media that is (or, if empty, was or
will be) in this input sub-unit. The feed direction is the
direction in which the media is fed on this sub-unit. This
dimension is measured in input sub-unit dimensional units
(prtInputDimUnit). If this input sub-unit can reliably sense
this value, the value is sensed by the printer and may not be
changed by management requests. Otherwise, the value may be
changed. The value (-1) means other and specifically means
that this sub-unit places no restriction on this parameter.
The value (-2) indicates unknown.
Additional information:
For trays 2, 3 and 5 (which can reliably sense this
value) the objects behave exactly the same as prtInputMediaDimFeedDirChosen.
Attempting to set this object for trays 2, 3 and 5 will cause
The default values assume the trays are configured for
letter size paper.
For tray 1 the value is the dimension for the media size currently declared.
Parsed from file LaserJet5Si-MIB.mib
Module: LaserJet5Si-MIB
Vendor: Hewlett-Packard
Module: CLJ8500-MIB
[Automatically extracted from oidview.com]
prtinputmediadimfeeddirdeclared OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS optional DESCRIPTION "This object provides the value of the declared dimension, in the feed direction, of the media that is (or, if empty, was or will be) in this input sub-unit. The feed direction is the direction in which the media is fed on this sub-unit. This dimension is measured in input sub-unit dimensional units (prtInputDimUnit). If this input sub-unit can reliably sense this value, the value is sensed by the printer and may not be changed by management requests. Otherwise, the value may be changed. The value (-1) means other and specifically means that this sub-unit places no restriction on this parameter. The value (-2) indicates unknown. Refer to Internet Draft Printer MIB, expiring Sept. 1997 for more details. Additional information: The default values assume the trays are configured for letter size paper. For tray 1 the value is the dimension for the media size currently declared. Valid values are 63000 to 140000 if prtInputDimUnit is ePtenThousandthsOfInches and 160000 to 356000 if prtInputDimUnit is ePmicrometers." ::= { prtInputEntry 4 }
prtinputmediadimfeeddirdeclared OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS optional DESCRIPTION "This object provides the value of the declared dimension, in the feed direction, of the media that is (or, if empty, was or will be) in this input sub-unit. The feed direction is the direction in which the media is fed on this sub-unit. This dimension is measured in input sub-unit dimensional units (prtInputDimUnit). If this input sub-unit can reliably sense this value, the value is sensed by the printer and may not be changed by management requests. Otherwise, the value may be changed. The value (-1) means other and specifically means that this sub-unit places no restriction on this parameter. The value (-2) indicates unknown. Additional information: For trays 2, 3 and 5 (which can reliably sense this value) the objects behave exactly the same as prtInputMediaDimFeedDirChosen. Attempting to set this object for trays 2, 3 and 5 will cause
to be returned. The default values assume the trays are configured for letter size paper. For tray 1 the value is the dimension for the media size currently declared." ::= { prtInputEntry 4 }
| OID | Name | Sub children | Sub Nodes Total | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.11.2.3.9.4.2.2.8.2.1.4.0 | prtinputmediadimfeeddirdeclared | 0 | 0 | None |
| OID | Name | Sub children | Sub Nodes Total | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.11.2.3.9.4.2.2.8.2.1.2 | prtinputtype | 1 | 1 | The type of technology (discriminated primarily according to feeder mechanism type) employed by the input sub-unit. Note, the Op… |
| 1.3.6.1.4.1.11.2.3.9.4.2.2.8.2.1.3 | prtinputdimunit | 1 | 1 | The unit of measurement for use calculating and relaying dimensional values for this input sub-unit. |
| 1.3.6.1.4.1.11.2.3.9.4.2.2.8.2.1.5 | prtinputmediadimxfeeddirdeclared | 1 | 1 | This object provides the value of the declared dimension, in the cross feed direction, of the media that is (or, if empty, was or… |
| 1.3.6.1.4.1.11.2.3.9.4.2.2.8.2.1.6 | prtinputmediadimfeeddirchosen | 1 | 1 | The printer will act as if media of the chosen dimension (in the feed direction) is present in this input source. Note that this… |
| 1.3.6.1.4.1.11.2.3.9.4.2.2.8.2.1.7 | prtinputmediadimxfeeddirchosen | 1 | 1 | The printer will act as if media of the chosen dimension (in the cross feed direction) is present in this input source. Note that… |
| 1.3.6.1.4.1.11.2.3.9.4.2.2.8.2.1.8 | prtinputcapacityunit | 1 | 1 | The unit of measurement for use in calculating and relaying capacity values for this input sub-unit. Additional information: A she… |
| 1.3.6.1.4.1.11.2.3.9.4.2.2.8.2.1.9 | prtinputmaxcapacity | 1 | 1 | The maximum capacity of the input sub-unit in input sub-unit capacity units (CapacityUnit). There is no convention associated wi… |
| 1.3.6.1.4.1.11.2.3.9.4.2.2.8.2.1.10 | prtinputcurrentlevel | 1 | 1 | The current capacity of the input sub-unit in input sub-unit capacity units (PrtCapacityUnitTC). If this input sub-unit can relia… |
| 1.3.6.1.4.1.11.2.3.9.4.2.2.8.2.1.11 | prtinputstatus | 1 | 1 | The current status of this input sub-unit. Refer to Internet Draft Printer MIB, expiring Sept. 1997 for more details. Additional … |
| 1.3.6.1.4.1.11.2.3.9.4.2.2.8.2.1.12 | prtinputmedianame | 1 | 1 | A description of the media contained in this input sub-unit; This description is intended for display to a human operator. This d… |
| 1.3.6.1.4.1.11.2.3.9.4.2.2.8.2.1.13 | prtinputname | 1 | 1 | The name assigned to this input sub-unit. |
| 1.3.6.1.4.1.11.2.3.9.4.2.2.8.2.1.14 | prtinputvendorname | 1 | 1 | The vendor name of this input sub-unit. |
| 1.3.6.1.4.1.11.2.3.9.4.2.2.8.2.1.15 | prtinputmodel | 1 | 1 | The model name of this input sub-unit. |
| 1.3.6.1.4.1.11.2.3.9.4.2.2.8.2.1.16 | prtinputversion | 1 | 1 | The version of this input sub-unit. |
| 1.3.6.1.4.1.11.2.3.9.4.2.2.8.2.1.17 | prtinputserialnumber | 1 | 1 | The serial number assigned to this input sub-unit. |
| 1.3.6.1.4.1.11.2.3.9.4.2.2.8.2.1.18 | prtinputdescription | 1 | 1 | A free-form text description of this input sub-unit in the localization specified by prtGeneralCurrentLocalization. |
| 1.3.6.1.4.1.11.2.3.9.4.2.2.8.2.1.19 | prtinputsecurity | 1 | 1 | Indicates if this input sub-unit has some security associated with it. Additional information: No security mechanism provided. |
| 1.3.6.1.4.1.11.2.3.9.4.2.2.8.2.1.24 | prtinputmedialoadtimeout | 1 | 1 | When the printer is not able to print due to a subunit being empty or the requested media must be manually loaded, the printer wi… |
| 1.3.6.1.4.1.11.2.3.9.4.2.2.8.2.1.26 | prtinputnextindex | 1 | 1 | The value of prtInputIndex corresponding to the input subunit which will be used when this input subunit is emptied and the timeo… |