The printer will act as if media of the chosen dimension (in
the feed direction) is present in this input source. Note
that this value will be used even if the input tray is empty.
Feed dimension measurements are taken relative to the feed
direction associated with that sub-unit and are in input sub-unit
dimensional units (MediaUnit). If the printer supports the
declared dimension, the granted dimension is the same as
the declared dimension. If not, the granted dimension is
set to the closest dimension that the printer supports
when the declared dimension is set. The value (-1) means
other and specifically indicates that this sub-unit
places no restriction on this parameter. The value (-2)
indicates unknown.
Refer to Internet Draft Printer MIB, expiring Sept. 1997 for more details.
Additional information:
The default value assumes the tray is configured
for letter size paper. The object for tray 1
returns the value of the media size for which the tray
is currently configured because it cannot sense what size
media it contains.
Parsed from file lj3200_snmp.mib.txt
Company: None
Module: LJ3200-MIB
The printer will act as if media of the chosen dimension (in
the feed direction) is present in this input source. Note
that this value will be used even if the input tray is empty.
Feed dimension measurements
are taken parallel relative to the feed direction
associated with that sub-unit and are in input sub-unit
dimensional units (DimUnit). If the printer supports the
declared dimension, the granted dimension is the same as
the declared dimension. If not, the granted dimension is
set to the closest dimension that the printer supports
when the declared dimension is set. The value (-1) means
other and specifically indicates that this sub-unit
places no restriction on this parameter. The value (-2)
indicates unknown.
Additional information:
The objects for trays 2, 3 and 5 reflect the
configuration of the corresponding drawers. When the drawer is open, a value
of -2 is returned. The default values assume the trays are configured for
letter size paper.
The object for trays 1 and 4 return the value of the media size for which the
tray is currently configured.
Parsed from file LaserJet5Si-MIB.mib
Module: LaserJet5Si-MIB
Vendor: Hewlett-Packard
Module: CLJ8500-MIB
[Automatically extracted from oidview.com]
prtinputmediadimfeeddirchosen OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS optional DESCRIPTION "The printer will act as if media of the chosen dimension (in the feed direction) is present in this input source. Note that this value will be used even if the input tray is empty. Feed dimension measurements are taken relative to the feed direction associated with that sub-unit and are in input sub-unit dimensional units (MediaUnit). If the printer supports the declared dimension, the granted dimension is the same as the declared dimension. If not, the granted dimension is set to the closest dimension that the printer supports when the declared dimension is set. The value (-1) means other and specifically indicates that this sub-unit places no restriction on this parameter. The value (-2) indicates unknown. Refer to Internet Draft Printer MIB, expiring Sept. 1997 for more details. Additional information: The default value assumes the tray is configured for letter size paper. The object for tray 1 returns the value of the media size for which the tray is currently configured because it cannot sense what size media it contains." ::= { prtInputEntry 6 }
prtinputmediadimfeeddirchosen OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS optional DESCRIPTION "The printer will act as if media of the chosen dimension (in the feed direction) is present in this input source. Note that this value will be used even if the input tray is empty. Feed dimension measurements are taken parallel relative to the feed direction associated with that sub-unit and are in input sub-unit dimensional units (DimUnit). If the printer supports the declared dimension, the granted dimension is the same as the declared dimension. If not, the granted dimension is set to the closest dimension that the printer supports when the declared dimension is set. The value (-1) means other and specifically indicates that this sub-unit places no restriction on this parameter. The value (-2) indicates unknown. Additional information: The objects for trays 2, 3 and 5 reflect the configuration of the corresponding drawers. When the drawer is open, a value of -2 is returned. The default values assume the trays are configured for letter size paper. The object for trays 1 and 4 return the value of the media size for which the tray is currently configured." ::= { prtInputEntry 6 }
OID | Name | Sub children | Sub Nodes Total | Description |
---|---|---|---|---|
1.3.6.1.4.1.11.2.3.9.4.2.2.8.2.1.6.0 | prtinputmediadimfeeddirchosen | 0 | 0 | None |
OID | Name | Sub children | Sub Nodes Total | Description |
---|---|---|---|---|
1.3.6.1.4.1.11.2.3.9.4.2.2.8.2.1.2 | prtinputtype | 1 | 1 | The type of technology (discriminated primarily according to feeder mechanism type) employed by the input sub-unit. Note, the Op… |
1.3.6.1.4.1.11.2.3.9.4.2.2.8.2.1.3 | prtinputdimunit | 1 | 1 | The unit of measurement for use calculating and relaying dimensional values for this input sub-unit. |
1.3.6.1.4.1.11.2.3.9.4.2.2.8.2.1.4 | prtinputmediadimfeeddirdeclared | 1 | 1 | This object provides the value of the declared dimension, in the feed direction, of the media that is (or, if empty, was or will … |
1.3.6.1.4.1.11.2.3.9.4.2.2.8.2.1.5 | prtinputmediadimxfeeddirdeclared | 1 | 1 | This object provides the value of the declared dimension, in the cross feed direction, of the media that is (or, if empty, was or… |
1.3.6.1.4.1.11.2.3.9.4.2.2.8.2.1.7 | prtinputmediadimxfeeddirchosen | 1 | 1 | The printer will act as if media of the chosen dimension (in the cross feed direction) is present in this input source. Note that… |
1.3.6.1.4.1.11.2.3.9.4.2.2.8.2.1.8 | prtinputcapacityunit | 1 | 1 | The unit of measurement for use in calculating and relaying capacity values for this input sub-unit. Additional information: A she… |
1.3.6.1.4.1.11.2.3.9.4.2.2.8.2.1.9 | prtinputmaxcapacity | 1 | 1 | The maximum capacity of the input sub-unit in input sub-unit capacity units (CapacityUnit). There is no convention associated wi… |
1.3.6.1.4.1.11.2.3.9.4.2.2.8.2.1.10 | prtinputcurrentlevel | 1 | 1 | The current capacity of the input sub-unit in input sub-unit capacity units (PrtCapacityUnitTC). If this input sub-unit can relia… |
1.3.6.1.4.1.11.2.3.9.4.2.2.8.2.1.11 | prtinputstatus | 1 | 1 | The current status of this input sub-unit. Refer to Internet Draft Printer MIB, expiring Sept. 1997 for more details. Additional … |
1.3.6.1.4.1.11.2.3.9.4.2.2.8.2.1.12 | prtinputmedianame | 1 | 1 | A description of the media contained in this input sub-unit; This description is intended for display to a human operator. This d… |
1.3.6.1.4.1.11.2.3.9.4.2.2.8.2.1.13 | prtinputname | 1 | 1 | The name assigned to this input sub-unit. |
1.3.6.1.4.1.11.2.3.9.4.2.2.8.2.1.14 | prtinputvendorname | 1 | 1 | The vendor name of this input sub-unit. |
1.3.6.1.4.1.11.2.3.9.4.2.2.8.2.1.15 | prtinputmodel | 1 | 1 | The model name of this input sub-unit. |
1.3.6.1.4.1.11.2.3.9.4.2.2.8.2.1.16 | prtinputversion | 1 | 1 | The version of this input sub-unit. |
1.3.6.1.4.1.11.2.3.9.4.2.2.8.2.1.17 | prtinputserialnumber | 1 | 1 | The serial number assigned to this input sub-unit. |
1.3.6.1.4.1.11.2.3.9.4.2.2.8.2.1.18 | prtinputdescription | 1 | 1 | A free-form text description of this input sub-unit in the localization specified by prtGeneralCurrentLocalization. |
1.3.6.1.4.1.11.2.3.9.4.2.2.8.2.1.19 | prtinputsecurity | 1 | 1 | Indicates if this input sub-unit has some security associated with it. Additional information: No security mechanism provided. |
1.3.6.1.4.1.11.2.3.9.4.2.2.8.2.1.24 | prtinputmedialoadtimeout | 1 | 1 | When the printer is not able to print due to a subunit being empty or the requested media must be manually loaded, the printer wi… |
1.3.6.1.4.1.11.2.3.9.4.2.2.8.2.1.26 | prtinputnextindex | 1 | 1 | The value of prtInputIndex corresponding to the input subunit which will be used when this input subunit is emptied and the timeo… |