Vendor: HP
Module: JETDIRECT3-MIB (Jdmib498.mib)
Type: OBJ ID
Access:
Syntax:
Automatically extracted from www.mibdepot.com
npPort OBJECT IDENTIFIER ::= { npCard 13 }
npPort OBJECT IDENTIFIER ::= { npCard 13 }
OID | Name | Sub children | Sub Nodes Total | Description |
---|---|---|---|---|
1.3.6.1.4.1.11.2.4.3.13.1 | 1 | 1 | 1 | npPortNumPorts |
1.3.6.1.4.1.11.2.4.3.13.2 | 2 | 1 | 1 | npPortType |
1.3.6.1.4.1.11.2.4.3.13.3 | npPortDesiredMode | 1 | 1 | The desired (remotely specified) operating mode of the parallel port. The following map is used to determine mode availability a… |
1.3.6.1.4.1.11.2.4.3.13.4 | npPortCentronicsHandshaking | 1 | 1 | The handshaking to be used in sending data over the parallel port. |
1.3.6.1.4.1.11.2.4.3.13.5 | npPortStatusLines | 1 | 1 | The state of the centronics status lines from the peripheral. The value is a bit mask. Bit Value Signal 0 0x01 … |
1.3.6.1.4.1.11.2.4.3.13.6 | npPortMaxModeAvaliable | 1 | 1 | The maximum available parallel mode by which the print-server may connect to an attached peripheral. This is a function of the t… |
1.3.6.1.4.1.11.2.4.3.13.7 | npPortBidiPollRate | 1 | 1 | Poll rate for bi-directional data. Range is 10 to 100 seconds. Defaults to 40 seconds. |
1.3.6.1.4.1.11.2.4.3.13.8 | npPortSetCentronicsTiming | 1 | 1 | Takes the 16 bit value and applies it to the centronics timing register. The default value is 0 and is not applied to the centroni… |
1.3.6.1.4.1.11.2.4.3.13.9 | npPortSetIoFlags | 1 | 1 | Sets and/or disables IO flags. Reset value of 0. EX-ONLY |
1.3.6.1.4.1.11.2.4.3.13.10 | npPortSetEcpHostRecTimer | 1 | 1 | Takes the 16 bit value and applies it to the Host Recovery Time Register. The default value is 0. EX-ONLY |
1.3.6.1.4.1.11.2.4.3.13.11 | npPortSetIoFlags2 | 1 | 1 | Sets and/or disables IO flags. Reset value of 0. EX-ONLY |
1.3.6.1.4.1.11.2.4.3.13.12 | npPortUsbDesiredMode | 1 | 1 | The desired operating mode of the USB interface to this device. JetDirect normally uses the best interface the device supports. S… |
1.3.6.1.4.1.11.2.4.3.13.13 | npPortUsbCurrentMode | 1 | 1 | The current operating mode of the USB interface to this device. unknown = unknown or no device connected unidirectional =… |
1.3.6.1.4.1.11.2.4.3.13.14 | npPortUsbProduct | 1 | 1 | The product string (if any) returned by the current USB device on this port. |
1.3.6.1.4.1.11.2.4.3.13.15 | npPortUsbManufacturer | 1 | 1 | The manufacturer string (if any) returned by the current USB device on this port. |
1.3.6.1.4.1.11.2.4.3.13.16 | npPortUsbSerialNumber | 1 | 1 | The serial number string (if any) returned by the current USB device on this port. |
OID | Name | Sub children | Sub Nodes Total | Description |
---|---|---|---|---|
1.3.6.1.4.1.11.2.4.3.1 | npSys | 17 | 36 | None |
1.3.6.1.4.1.11.2.4.3.2 | npCardPFatalErr | 1 | 1 | The most recent peripheral fatal error that is being displayed on the peripheral's display panel. The error typically appears as … |
1.3.6.1.4.1.11.2.4.3.3 | npCardIoFatalErr | 1 | 1 | The most recent LAN Card error that is being displayed on the peripheral's display panel. The error typically appears as a '80 S… |
1.3.6.1.4.1.11.2.4.3.4 | npConns | 17 | 34 | None |
1.3.6.1.4.1.11.2.4.3.5 | npCfg | 19 | 41 | None |
1.3.6.1.4.1.11.2.4.3.6 | npTcp | 4 | 8 | None |
1.3.6.1.4.1.11.2.4.3.7 | npCtl | 18 | 36 | None |
1.3.6.1.4.1.11.2.4.3.8 | npNpi | 4 | 124 | None |
1.3.6.1.4.1.11.2.4.3.9 | npElt | 1 | 6 | None |
1.3.6.1.4.1.11.2.4.3.10 | npIpx | 23 | 68 | None |
1.3.6.1.4.1.11.2.4.3.11 | npDm | 4 | 8 | None |
1.3.6.1.4.1.11.2.4.3.12 | llcconstategroup | 3 | 6 | None |
1.3.6.1.4.1.11.2.4.3.14 | npXip | 1 | 2 | None |
1.3.6.1.4.1.11.2.4.3.15 | npCRC | 1 | 5 | None |
1.3.6.1.4.1.11.2.4.3.16 | npDhcp | 2 | 4 | None |
1.3.6.1.4.1.11.2.4.3.17 | npScan | 6 | 12 | None |
1.3.6.1.4.1.11.2.4.3.18 | npWeb | 6 | 12 | None |
1.3.6.1.4.1.11.2.4.3.19 | npAtk | 3 | 13 | None |