The manufacturer string (if any) returned by the current USB device
on this port.
Parsed from file jdMibCV5.mib.txt
Company: hp
Module: JETDIRECT3-MIB
Child arc 0 is used to translate between SNMPv1 and SNMPv2 notification parameters as explained in IETF RFC 2576, section 3.
npPortUsbManufacturer OBJECT-TYPE SYNTAX DisplayString128 MAX-ACCESS read-only STATUS current DESCRIPTION "The manufacturer string (if any) returned by the current USB device on this port." ::={ npPort 15 }
OID | Name | Sub children | Sub Nodes Total | Description |
---|---|---|---|---|
1.3.6.1.4.1.11.2.4.3.13.15.0 | npPortUsbManufacturer | 0 | 0 | None |
OID | Name | Sub children | Sub Nodes Total | Description |
---|---|---|---|---|
1.3.6.1.4.1.11.2.4.3.13.1 | 1 | 1 | 1 | npPortNumPorts |
1.3.6.1.4.1.11.2.4.3.13.2 | 2 | 1 | 1 | npPortType |
1.3.6.1.4.1.11.2.4.3.13.3 | npPortDesiredMode | 1 | 1 | The desired (remotely specified) operating mode of the parallel port. The following map is used to determine mode availability a… |
1.3.6.1.4.1.11.2.4.3.13.4 | npPortCentronicsHandshaking | 1 | 1 | The handshaking to be used in sending data over the parallel port. |
1.3.6.1.4.1.11.2.4.3.13.5 | npPortStatusLines | 1 | 1 | The state of the centronics status lines from the peripheral. The value is a bit mask. Bit Value Signal 0 0x01 … |
1.3.6.1.4.1.11.2.4.3.13.6 | npPortMaxModeAvaliable | 1 | 1 | The maximum available parallel mode by which the print-server may connect to an attached peripheral. This is a function of the t… |
1.3.6.1.4.1.11.2.4.3.13.7 | npPortBidiPollRate | 1 | 1 | Poll rate for bi-directional data. Range is 10 to 100 seconds. Defaults to 40 seconds. |
1.3.6.1.4.1.11.2.4.3.13.8 | npPortSetCentronicsTiming | 1 | 1 | Takes the 16 bit value and applies it to the centronics timing register. The default value is 0 and is not applied to the centroni… |
1.3.6.1.4.1.11.2.4.3.13.9 | npPortSetIoFlags | 1 | 1 | Sets and/or disables IO flags. Reset value of 0. EX-ONLY |
1.3.6.1.4.1.11.2.4.3.13.10 | npPortSetEcpHostRecTimer | 1 | 1 | Takes the 16 bit value and applies it to the Host Recovery Time Register. The default value is 0. EX-ONLY |
1.3.6.1.4.1.11.2.4.3.13.11 | npPortSetIoFlags2 | 1 | 1 | Sets and/or disables IO flags. Reset value of 0. EX-ONLY |
1.3.6.1.4.1.11.2.4.3.13.12 | npPortUsbDesiredMode | 1 | 1 | The desired operating mode of the USB interface to this device. JetDirect normally uses the best interface the device supports. S… |
1.3.6.1.4.1.11.2.4.3.13.13 | npPortUsbCurrentMode | 1 | 1 | The current operating mode of the USB interface to this device. unknown = unknown or no device connected unidirectional =… |
1.3.6.1.4.1.11.2.4.3.13.14 | npPortUsbProduct | 1 | 1 | The product string (if any) returned by the current USB device on this port. |
1.3.6.1.4.1.11.2.4.3.13.16 | npPortUsbSerialNumber | 1 | 1 | The serial number string (if any) returned by the current USB device on this port. |