The desired (remotely specified) operating mode of the parallel port.
The following map is used to determine mode availability and provides
the definition for each mode:
Available When
npPortDesiredMode Definition
1 bitronics always
EX will attempt to retrieve nibble mode back
channel data from the printer. If the printer
does not support bitronics, EX will default
back to compatibility mode.
2 centronics npPortMaxModeAvailable >= 1
EX will only support compatibility (centronics)
mode when talking to the printer
3 ecpWithNibbleMLC npPortMaxModeAvailable >= 1
EX will attempt to talk to the printer across
MLC. This is done by using ECP in the forward
direction and nibble-mode bitronics in the
reverse direction. If the printer does not
support both MLC and ECP, EX will fall back to
regular bitronics, as described above.
4 ecpWithMLC npPortMaxModeAvailable >= 1
EX will attempt to talk to the printer across
MLC. This is done by using ECP in both forward
and reverse directions. If the printer does
not support both MLC and ECP, EX will fall back
to regular bitronics, as described above.
5 ecp npPortMaxModeAvailable >= 1
EX will attempt to talk to the printer using
ECP in both the forward and reverse directions.
If the printer does not support ECP, EX will
fall back to regular bitronics, as described
above. EX-ONLY
Parsed from file jdMibCV5.mib.txt
Company: None
Module: JETDIRECT3-MIB
The desired (remotely specified) operating mode of the parallel port.
The following map is used to determine mode availability and provides
the definition for each mode:
Available When
npPortDesiredMode Definition
1 bitronics always
EX will attempt to retrieve nibble mode back
channel data from the printer. If the printer
does not support bitronics, EX will default
back to compatibility mode.
2 centronics npPortMaxModeAvailable >= 1
EX will only support compatibility (centronics)
mode when talking to the printer
3 ecpWithNibbleMLC npPortMaxModeAvailable >= 1
EX will attempt to talk to the printer across
MLC. This is done by using ECP in the forward
direction and nibble-mode bitronics in the
reverse direction. If the printer does not
support both MLC and ECP, EX will fall back to
regular bitronics, as described above.
4 ecpWithMLC npPortMaxModeAvailable >= 1
EX will attempt to talk to the printer across
MLC. This is done by using ECP in both forward
and reverse directions. If the printer does
not support both MLC and ECP, EX will fall back
to regular bitronics, as described above.
5 ecp npPortMaxModeAvailable >= 1
EX will attempt to talk to the printer using
ECP in both the forward and reverse directions.
If the printer does not support ECP, EX will
fall back to regular bitronics, as described
above.
Parsed from file JETDIRECT3-MIB.mib
Module: JETDIRECT3-MIB
Child arc 0 is used to translate between SNMPv1 and SNMPv2 notification parameters as explained in IETF RFC 2576, section 3.
npPortDesiredMode OBJECT-TYPE SYNTAX INTEGER { bitronics(1), centronics(2), ecpWithMLC(3), ecpWithNibbleMLC(4), ecp(5) } MAX-ACCESS read-write STATUS current DESCRIPTION "The desired (remotely specified) operating mode of the parallel port. The following map is used to determine mode availability and provides the definition for each mode: Available When npPortDesiredMode Definition 1 bitronics always EX will attempt to retrieve nibble mode back channel data from the printer. If the printer does not support bitronics, EX will default back to compatibility mode. 2 centronics npPortMaxModeAvailable >= 1 EX will only support compatibility (centronics) mode when talking to the printer 3 ecpWithNibbleMLC npPortMaxModeAvailable >= 1 EX will attempt to talk to the printer across MLC. This is done by using ECP in the forward direction and nibble-mode bitronics in the reverse direction. If the printer does not support both MLC and ECP, EX will fall back to regular bitronics, as described above. 4 ecpWithMLC npPortMaxModeAvailable >= 1 EX will attempt to talk to the printer across MLC. This is done by using ECP in both forward and reverse directions. If the printer does not support both MLC and ECP, EX will fall back to regular bitronics, as described above. 5 ecp npPortMaxModeAvailable >= 1 EX will attempt to talk to the printer using ECP in both the forward and reverse directions. If the printer does not support ECP, EX will fall back to regular bitronics, as described above. EX-ONLY" ::={ npPort 3 }
npPortDesiredMode OBJECT-TYPE SYNTAX INTEGER { bitronics(1), centronics(2), ecpWithMLC(3), ecpWithNibbleMLC(4), ecp(5) } ACCESS read-write STATUS optional DESCRIPTION "The desired (remotely specified) operating mode of the parallel port. The following map is used to determine mode availability and provides the definition for each mode: Available When npPortDesiredMode Definition 1 bitronics always EX will attempt to retrieve nibble mode back channel data from the printer. If the printer does not support bitronics, EX will default back to compatibility mode. 2 centronics npPortMaxModeAvailable >= 1 EX will only support compatibility (centronics) mode when talking to the printer 3 ecpWithNibbleMLC npPortMaxModeAvailable >= 1 EX will attempt to talk to the printer across MLC. This is done by using ECP in the forward direction and nibble-mode bitronics in the reverse direction. If the printer does not support both MLC and ECP, EX will fall back to regular bitronics, as described above. 4 ecpWithMLC npPortMaxModeAvailable >= 1 EX will attempt to talk to the printer across MLC. This is done by using ECP in both forward and reverse directions. If the printer does not support both MLC and ECP, EX will fall back to regular bitronics, as described above. 5 ecp npPortMaxModeAvailable >= 1 EX will attempt to talk to the printer using ECP in both the forward and reverse directions. If the printer does not support ECP, EX will fall back to regular bitronics, as described above." ::={ npPort 3 }
| OID | Name | Sub children | Sub Nodes Total | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.11.2.4.3.13.3.0 | npPortDesiredMode | 0 | 0 | None |
| OID | Name | Sub children | Sub Nodes Total | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.11.2.4.3.13.1 | 1 | 1 | 1 | npPortNumPorts |
| 1.3.6.1.4.1.11.2.4.3.13.2 | 2 | 1 | 1 | npPortType |
| 1.3.6.1.4.1.11.2.4.3.13.4 | npPortCentronicsHandshaking | 1 | 1 | The handshaking to be used in sending data over the parallel port. |
| 1.3.6.1.4.1.11.2.4.3.13.5 | npPortStatusLines | 1 | 1 | The state of the centronics status lines from the peripheral. The value is a bit mask. Bit Value Signal 0 0x01 … |
| 1.3.6.1.4.1.11.2.4.3.13.6 | npPortMaxModeAvaliable | 1 | 1 | The maximum available parallel mode by which the print-server may connect to an attached peripheral. This is a function of the t… |
| 1.3.6.1.4.1.11.2.4.3.13.7 | npPortBidiPollRate | 1 | 1 | Poll rate for bi-directional data. Range is 10 to 100 seconds. Defaults to 40 seconds. |
| 1.3.6.1.4.1.11.2.4.3.13.8 | npPortSetCentronicsTiming | 1 | 1 | Takes the 16 bit value and applies it to the centronics timing register. The default value is 0 and is not applied to the centroni… |
| 1.3.6.1.4.1.11.2.4.3.13.9 | npPortSetIoFlags | 1 | 1 | Sets and/or disables IO flags. Reset value of 0. EX-ONLY |
| 1.3.6.1.4.1.11.2.4.3.13.10 | npPortSetEcpHostRecTimer | 1 | 1 | Takes the 16 bit value and applies it to the Host Recovery Time Register. The default value is 0. EX-ONLY |
| 1.3.6.1.4.1.11.2.4.3.13.11 | npPortSetIoFlags2 | 1 | 1 | Sets and/or disables IO flags. Reset value of 0. EX-ONLY |
| 1.3.6.1.4.1.11.2.4.3.13.12 | npPortUsbDesiredMode | 1 | 1 | The desired operating mode of the USB interface to this device. JetDirect normally uses the best interface the device supports. S… |
| 1.3.6.1.4.1.11.2.4.3.13.13 | npPortUsbCurrentMode | 1 | 1 | The current operating mode of the USB interface to this device. unknown = unknown or no device connected unidirectional =… |
| 1.3.6.1.4.1.11.2.4.3.13.14 | npPortUsbProduct | 1 | 1 | The product string (if any) returned by the current USB device on this port. |
| 1.3.6.1.4.1.11.2.4.3.13.15 | npPortUsbManufacturer | 1 | 1 | The manufacturer string (if any) returned by the current USB device on this port. |
| 1.3.6.1.4.1.11.2.4.3.13.16 | npPortUsbSerialNumber | 1 | 1 | The serial number string (if any) returned by the current USB device on this port. |