Enumerate as follows:
0 = treat all hosts as local which means JetDirect sends a maximum of
1460 bytes of data in all outbound packets.
1 = treat hosts on different subnets but in the same network as local
which means for hosts in the same network, send 1460 bytes; else send 536
bytes in outbound packets.
2 = treat only hosts on the same network and same subnet as local (use
1460 bytes); otherwise treat them as remote hosts (send 536 bytes).
Parsed from file jdMibCV5.mib.txt
Company: None
Module: JETDIRECT3-MIB
Enumerate as follows:
0 = treat all hosts as local which means JetDirect sends a maximum of
1460 bytes of data in all outbound packets.
1 = treat hosts on different subnets but in the same network as local
which means for hosts in the same network, send 1460 bytes; else send 536
bytes in outbound packets.
2 = treat only hosts on the same network and same subnet as local (use
1460 bytes); otherwise treat them as remote hosts (send 536 bytes).
Parsed from file JETDIRECT3-MIB.mib
Module: JETDIRECT3-MIB
Vendor: Hewlett-Packard
Module: JETDIRECT3-MIB
[Automatically extracted from oidview.com]
npCfgTcpMss OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "Enumerate as follows: 0 = treat all hosts as local which means JetDirect sends a maximum of 1460 bytes of data in all outbound packets. 1 = treat hosts on different subnets but in the same network as local which means for hosts in the same network, send 1460 bytes; else send 536 bytes in outbound packets. 2 = treat only hosts on the same network and same subnet as local (use 1460 bytes); otherwise treat them as remote hosts (send 536 bytes)." ::={ npCfg 11 }
npCfgTcpMss OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS optional DESCRIPTION "Enumerate as follows: 0 = treat all hosts as local which means JetDirect sends a maximum of 1460 bytes of data in all outbound packets. 1 = treat hosts on different subnets but in the same network as local which means for hosts in the same network, send 1460 bytes; else send 536 bytes in outbound packets. 2 = treat only hosts on the same network and same subnet as local (use 1460 bytes); otherwise treat them as remote hosts (send 536 bytes)." ::={ npCfg 11 }
OID | Name | Sub children | Sub Nodes Total | Description |
---|---|---|---|---|
1.3.6.1.4.1.11.2.4.3.5.11.0 | npCfgTcpMss | 0 | 0 | None |
OID | Name | Sub children | Sub Nodes Total | Description |
---|---|---|---|---|
1.3.6.1.4.1.11.2.4.3.5.1 | npCfgSource | 1 | 1 | This object indicates how the device obtained its IP configuration. |
1.3.6.1.4.1.11.2.4.3.5.2 | npCfgYiaddr | 1 | 1 | The IP address assigned to the card from the BOOTP reply yiaddr field. |
1.3.6.1.4.1.11.2.4.3.5.3 | npCfgSiaddr | 1 | 1 | The IP address of the TFTP server from the BOOTP reply siaddr field. |
1.3.6.1.4.1.11.2.4.3.5.4 | npCfgGiaddr | 1 | 1 | The IP address of the TFTP gateway from the BOOTP reply giaddr field. |
1.3.6.1.4.1.11.2.4.3.5.5 | npCfgLogServer | 1 | 1 | The IP address of the Log Server from the BOOTP reply Tag: 7 field. |
1.3.6.1.4.1.11.2.4.3.5.6 | npCfgSyslogFacility | 1 | 1 | This specifies the facility identifier used in syslog messages generated by the card. |
1.3.6.1.4.1.11.2.4.3.5.7 | npCfgAccessState | 1 | 1 | An indication of whether or not the requesting host is allowed to connect to the card as dictated by the access list. |
1.3.6.1.4.1.11.2.4.3.5.8 | npCfgAccessListNum | 1 | 1 | The number of access list entries. |
1.3.6.1.4.1.11.2.4.3.5.9 | npCfgAccessListTable | 1 | 4 | List of access addresses and masks. |
1.3.6.1.4.1.11.2.4.3.5.10 | npCfgIdleTimeout | 1 | 1 | The idle timeout is the length in seconds after which an idle connection is terminated. A value of zero disables the timeout. |
1.3.6.1.4.1.11.2.4.3.5.12 | npCfgSubnetMask | 1 | 1 | The subnet mask associated with the IP address of this card. |
1.3.6.1.4.1.11.2.4.3.5.13 | npCfgDefaultGateway | 1 | 1 | This variable contains the IP address of the default router for this card. |
1.3.6.1.4.1.11.2.4.3.5.14 | npCfgRootURL | 1 | 1 | The HTTP root(/) directory redirect location. |
1.3.6.1.4.1.11.2.4.3.5.15 | npCfgGenURL | 1 | 1 | The HTTP /redirect directory location. |
1.3.6.1.4.1.11.2.4.3.5.16 | npCfgDomainName | 1 | 1 | The JetDirect domain name as configured by Web JetAdmin. |
1.3.6.1.4.1.11.2.4.3.5.17 | npCfgSlpTtl | 1 | 1 | The TTL value is used in the IP header of SLP multicast pkts sent by JetDirect. |
1.3.6.1.4.1.11.2.4.3.5.18 | npCfgIPP | 1 | 1 | The value can be 0, meaning IPP has been disabled, or 1, meaning IPP has been enabled. |
1.3.6.1.4.1.11.2.4.3.5.19 | npCfgMailServerUrl | 1 | 1 | The mail server to which messages originating from the JetDirect should be sent. The value is a URL in the form: protocol://addres… |