The mail server to which messages originating
from the JetDirect should be sent. The value
is a URL in the form:
protocol://address:port
The protocol and port fields are optional.
The default protocol is 'smtp' and the default
port is '25'. The address field may be an IP
address in dot notation or a DNS name.
Examples:
smtp://156.153.255.242:25
smtp://parrel1.hp.com
156.153.255.242:25
palrel1.hp.com
Parsed from file jdMibCV5.mib.txt
Company: hp
Module: JETDIRECT3-MIB
Child arc 0 is used to translate between SNMPv1 and SNMPv2 notification parameters as explained in IETF RFC 2576, section 3.
npCfgMailServerUrl OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-write STATUS current DESCRIPTION "The mail server to which messages originating from the JetDirect should be sent. The value is a URL in the form: protocol://address:port The protocol and port fields are optional. The default protocol is 'smtp' and the default port is '25'. The address field may be an IP address in dot notation or a DNS name. Examples: smtp://156.153.255.242:25 smtp://parrel1.hp.com 156.153.255.242:25 palrel1.hp.com" ::= { npCfg 19 }
OID | Name | Sub children | Sub Nodes Total | Description |
---|---|---|---|---|
1.3.6.1.4.1.11.2.4.3.5.19.0 | npCfgMailServerUrl | 0 | 0 | None |
OID | Name | Sub children | Sub Nodes Total | Description |
---|---|---|---|---|
1.3.6.1.4.1.11.2.4.3.5.1 | npCfgSource | 1 | 1 | This object indicates how the device obtained its IP configuration. |
1.3.6.1.4.1.11.2.4.3.5.2 | npCfgYiaddr | 1 | 1 | The IP address assigned to the card from the BOOTP reply yiaddr field. |
1.3.6.1.4.1.11.2.4.3.5.3 | npCfgSiaddr | 1 | 1 | The IP address of the TFTP server from the BOOTP reply siaddr field. |
1.3.6.1.4.1.11.2.4.3.5.4 | npCfgGiaddr | 1 | 1 | The IP address of the TFTP gateway from the BOOTP reply giaddr field. |
1.3.6.1.4.1.11.2.4.3.5.5 | npCfgLogServer | 1 | 1 | The IP address of the Log Server from the BOOTP reply Tag: 7 field. |
1.3.6.1.4.1.11.2.4.3.5.6 | npCfgSyslogFacility | 1 | 1 | This specifies the facility identifier used in syslog messages generated by the card. |
1.3.6.1.4.1.11.2.4.3.5.7 | npCfgAccessState | 1 | 1 | An indication of whether or not the requesting host is allowed to connect to the card as dictated by the access list. |
1.3.6.1.4.1.11.2.4.3.5.8 | npCfgAccessListNum | 1 | 1 | The number of access list entries. |
1.3.6.1.4.1.11.2.4.3.5.9 | npCfgAccessListTable | 1 | 4 | List of access addresses and masks. |
1.3.6.1.4.1.11.2.4.3.5.10 | npCfgIdleTimeout | 1 | 1 | The idle timeout is the length in seconds after which an idle connection is terminated. A value of zero disables the timeout. |
1.3.6.1.4.1.11.2.4.3.5.11 | npCfgLocalSubnets, npCfgTcpMss | 1 | 1 | Enumerate as follows: 0 = treat all hosts as local which means JetDirect sends a maximum of 1460 bytes of data in all outbound pa… |
1.3.6.1.4.1.11.2.4.3.5.12 | npCfgSubnetMask | 1 | 1 | The subnet mask associated with the IP address of this card. |
1.3.6.1.4.1.11.2.4.3.5.13 | npCfgDefaultGateway | 1 | 1 | This variable contains the IP address of the default router for this card. |
1.3.6.1.4.1.11.2.4.3.5.14 | npCfgRootURL | 1 | 1 | The HTTP root(/) directory redirect location. |
1.3.6.1.4.1.11.2.4.3.5.15 | npCfgGenURL | 1 | 1 | The HTTP /redirect directory location. |
1.3.6.1.4.1.11.2.4.3.5.16 | npCfgDomainName | 1 | 1 | The JetDirect domain name as configured by Web JetAdmin. |
1.3.6.1.4.1.11.2.4.3.5.17 | npCfgSlpTtl | 1 | 1 | The TTL value is used in the IP header of SLP multicast pkts sent by JetDirect. |
1.3.6.1.4.1.11.2.4.3.5.18 | npCfgIPP | 1 | 1 | The value can be 0, meaning IPP has been disabled, or 1, meaning IPP has been enabled. |