Vendor: Synernetics, Inc.
Module: SWITCHING-SYSTEMS-MIB
[Automatically extracted from oidview.com]
swSysSystemLog OBJECT IDENTIFIER ::= { swSysSystem 27 }
swSysSystemLog OBJECT IDENTIFIER ::= { swSysSystem 27 }
OID | Name | Sub children | Sub Nodes Total | Description |
---|---|---|---|---|
1.3.6.1.4.1.114.1.4.1.27.1 | swSysSystemLogEntryCurrentCount | 1 | 1 | The number of entries currently recorded in the system log. |
1.3.6.1.4.1.114.1.4.1.27.2 | swSysSystemLogMaxSize | 1 | 1 | The maximum number of events that can be recorded in the system log. |
1.3.6.1.4.1.114.1.4.1.27.3 | swSysSystemLogSeverityThreshold | 1 | 1 | This object determines the miminum serverety level of events recorded in the system log. For example, if the swSysSysteLogSever… |
1.3.6.1.4.1.114.1.4.1.27.4 | swSysSystemLogTable | 1 | 6 | This table provides information on recorded system events. |
OID | Name | Sub children | Sub Nodes Total | Description |
---|---|---|---|---|
1.3.6.1.4.1.114.1.4.1.1 | lpsSystemId, swSysSystemId | 1 | 1 | The unique identifier assigned to this system during manufacturing. |
1.3.6.1.4.1.114.1.4.1.2 | lpsSystemType, swSysSystemType | 1 | 1 | The type of system. |
1.3.6.1.4.1.114.1.4.1.3 | lpsSystemName, swSysSystemName | 1 | 1 | The text string describing this system. |
1.3.6.1.4.1.114.1.4.1.4 | lpsSystemManufacturer, swSysSystemManufacturer | 1 | 1 | The text string describing the manufacturer of this system. |
1.3.6.1.4.1.114.1.4.1.5 | lpsSystemHardwareRevision, swSysSystemHardwareRevision | 1 | 1 | The revision level of the system, contained in two octets. The first octet indicates the artwork revision, and the second octet … |
1.3.6.1.4.1.114.1.4.1.6 | lpsSystemMemorySize, swSysSystemMemorySize | 1 | 1 | The amount of memory (RAM), in bytes, present on the system processor board. |
1.3.6.1.4.1.114.1.4.1.7 | lpsSystemFlashMemorySize, swSysSystemFlashMemorySize | 1 | 1 | The amount of flash memory, in bytes, present on the system processor board. |
1.3.6.1.4.1.114.1.4.1.8 | lpsSystemNvMemorySize, swSysSystemNvMemorySize | 1 | 1 | The amount of non-volatile memory, in bytes, present on the system processor board. |
1.3.6.1.4.1.114.1.4.1.9 | lpsSystemSoftwareRevision, swSysSystemSoftwareRevision | 1 | 1 | The revision number of the LANplex system software. Each byte indicates the following: byte 0: major release number. byte 1: minor… |
1.3.6.1.4.1.114.1.4.1.10 | lpsSystemBuildTime, swSysSystemBuildTime | 1 | 1 | The build time of the system software. |
1.3.6.1.4.1.114.1.4.1.11 | lpsSystemSnmpRevision, swSysSystemSnmpRevision | 1 | 1 | The revision number of the SNMP agent implementation. |
1.3.6.1.4.1.114.1.4.1.12 | lpsSystemRequestedSnmpMode, swSysSystemRequestedSnmpMode | 1 | 1 | This object describes the requested SNMP mode for the system. The value of this object indicates the mode that will become effec… |
1.3.6.1.4.1.114.1.4.1.13 | lpsSystemCurrentSnmpMode, swSysSystemCurrentSnmpMode | 1 | 1 | This object describes the currently active SNMP mode for the system. Note that only a subset of the above values may be valid fo… |
1.3.6.1.4.1.114.1.4.1.14 | lpsSystemAction, swSysSystemAction | 1 | 1 | This object, when read, always returns the value other(1). Setting this object to the value reset(2) causes a reset of the syste… |
1.3.6.1.4.1.114.1.4.1.15 | lpsSystemOvertemperature, swSysSystemOvertemperature | 1 | 1 | This object indicates the current overtemperature status for the system. If the system does not support overtemperature detectio… |
1.3.6.1.4.1.114.1.4.1.16 | lpsSystemFanFailure, swSysSystemFanFailure | 1 | 1 | This object indicates the current fan status for the system. If the system does not support fan failure detection, this object r… |
1.3.6.1.4.1.114.1.4.1.17 | lpsSystemProtocolMask, swSysSystemProtocolMask | 1 | 1 | This object is a bit mask that indicates which protocols exist in the software image currently loaded in memory. The value of thi… |
1.3.6.1.4.1.114.1.4.1.18 | swSysSystemConsoleAccess | 1 | 1 | This object determines whether another device can remotely access the system console via Telnet, Rlogin, or modem port. An existin… |
1.3.6.1.4.1.114.1.4.1.19 | swSysSystemConsoleReadPwd | 1 | 1 | This object is the console read-access password. |
1.3.6.1.4.1.114.1.4.1.20 | swSysSystemConsoleWritePwd | 1 | 1 | This object is the console write-access password. The read-write community string is required for access to this object. |
1.3.6.1.4.1.114.1.4.1.21 | swSysSystemConsoleAdminPwd | 1 | 1 | This object is the console admin-access password. The read-write community string is required for access to this object. |
1.3.6.1.4.1.114.1.4.1.22 | swSysSystemDateTime | 1 | 1 | The current date and time as reflected by the system clock in the format mm/dd/yy hh:mm:ss xM. |
1.3.6.1.4.1.114.1.4.1.23 | swSysSystemDSTime | 1 | 1 | This parameter specifies the displacement, in minutes, from non-daylight savings time. The swSysDSTime object, along with the sw… |
1.3.6.1.4.1.114.1.4.1.24 | swSysSystemTimeZone | 1 | 1 | This parameter specifies, in minutes, displacement of the system west of Greenwich. A negative number for this parameter indicate… |
1.3.6.1.4.1.114.1.4.1.25 | swSysSystemCurrentFddiStationMode | 1 | 1 | This object describes the current FDDI station mode for systems that support multi-station mode. |
1.3.6.1.4.1.114.1.4.1.26 | swSysSystemRequestedFddiStationMode | 1 | 1 | This object describes the requested FDDI station mode for systems that support multi-station mode. The requested mode will become… |
1.3.6.1.4.1.114.1.4.1.28 | swSysSystemBaseMACAddress | 1 | 1 | The base MAC address for the system. |
1.3.6.1.4.1.114.1.4.1.29 | swSysSystemMACAddressCount | 1 | 1 | The number of MAC addresses allocated to this system. |
1.3.6.1.4.1.114.1.4.1.30 | swSysSystemChassisSerialNumber | 1 | 1 | The serial number of the chassis. |
1.3.6.1.4.1.114.1.4.1.31 | swSysSystemFPMemorySize | 1 | 1 | The amount of frame processor memory (RAM), in bytes. |
1.3.6.1.4.1.114.1.4.1.32 | swSysSystemBufferSize | 1 | 1 | The amount of buffer memory, in bytes. |