This attribute specifies the aggregate of all ComPort
upstream maximum cell rates on the Ethernet port
(VLAN). This includes both acquired and unacquired
ComPorts. Defined in Kbps.
Parsed from file com21.hcxeth.mib.txt
Company: None
Module: COM21-HCXETH-MIB
This attribute specifies the aggregate of all ComPort
upstream maximum cell rates on the Ethernet port
(VLAN). This includes both acquired and unacquired
ComPorts. Defined in Kbps.
Parsed from file COM21-HCXETH-MIB.mib
Module: COM21-HCXETH-MIB
Vendor: Com21
Module: COM21-HCXETH-MIB
[Automatically extracted from oidview.com]
hcxEtherAggrUpStrmMaxRate OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION " This attribute specifies the aggregate of all ComPort upstream maximum cell rates on the Ethernet port (VLAN). This includes both acquired and unacquired ComPorts. Defined in Kbps." ::= { com21HcxEtherPortEntry 16 }
hcxEtherAggrUpStrmMaxRate OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION " This attribute specifies the aggregate of all ComPort upstream maximum cell rates on the Ethernet port (VLAN). This includes both acquired and unacquired ComPorts. Defined in Kbps." ::= { com21HcxEtherPortEntry 16 }
OID | Name | Sub children | Sub Nodes Total | Description |
---|---|---|---|---|
1.3.6.1.4.1.1141.2.42.1.1.1 | hcxEtherPortShelfId | 0 | 0 | contains shelf in which this Ethernet port is located. |
1.3.6.1.4.1.1141.2.42.1.1.2 | hcxEtherPortSlotId | 0 | 0 | contains slot in which this Ethernet port is located. |
1.3.6.1.4.1.1141.2.42.1.1.3 | hcxEtherPortId | 0 | 0 | contains Ethernet port id. Represents the port number on the card. In the case of single 10baseT or 100baseT, this value will alw… |
1.3.6.1.4.1.1141.2.42.1.1.4 | hcxEtherPortType | 0 | 0 | contains type of Ethernet port. |
1.3.6.1.4.1.1141.2.42.1.1.5 | hcxEtherPortService | 0 | 0 | contains string defining the service provided by the Ethernet port (VLAN). Set by NMAPS. Default null string. CC most ensure uniq… |
1.3.6.1.4.1.1141.2.42.1.1.6 | hcxEtherPortPrimServState | 0 | 0 | contains primary service state of the Ethernet Unit. This state shall be effected by the hcxEtherPortState attribute. |
1.3.6.1.4.1.1141.2.42.1.1.7 | hcxEtherPortSecServState | 0 | 0 | contains a string defining the secondary service states of the Ethernet Unit. The substrings supported by the Ethernet Unit shall… |
1.3.6.1.4.1.1141.2.42.1.1.9 | hcxEtherMaxBandwidth | 0 | 0 | This attribute defines the maximum output payload bandwidth associated with the Ethernet port. Defined in thousands of bps. From … |
1.3.6.1.4.1.1141.2.42.1.1.12 | hcxEtherAggrDnStrmCbrRate | 0 | 0 | This attribute specifies the aggregate of all ComPort downstream CBR rates configured on the Ethernet port (VLAN). This includes … |
1.3.6.1.4.1.1141.2.42.1.1.13 | hcxEtherAggrDnStrmPcrRate | 0 | 0 | This attribute specifies the aggregate of all ComPort downstream PCR rates configured on the Ethernet port (VLAN). This includes … |
1.3.6.1.4.1.1141.2.42.1.1.14 | hcxEtherAggrUpStrmCbrRate | 0 | 0 | This attribute specifies the aggregate of all ComPort upstream CBR rates configured on the Ethernet port (VLAN). This includes bo… |
1.3.6.1.4.1.1141.2.42.1.1.15 | hcxEtherAggrUpStrmMinRate | 0 | 0 | This attribute specifies the aggregate of all ComPort upstream minimum PCR rates on the Ethernet port (VLAN). This includes both … |
1.3.6.1.4.1.1141.2.42.1.1.17 | hcxEtherAgeTime | 0 | 0 | This attribute defines, in seconds, the aging time for non-accessed entries in the Bridge mapping table. The default shall be 300… |
1.3.6.1.4.1.1141.2.42.1.1.18 | hcxEtherPortConfigState | 0 | 0 | The Ethernet Port State is an active-value. The Ethernet port will default to offline, in which case no traffic shall be passed. … |
1.3.6.1.4.1.1141.2.42.1.1.19 | hcxEtherPortRestartAction | 0 | 0 | The Ethernet Port Restart Action is an active-value. The setting of this attribute to restart(2) causes the Ethernet port to rese… |
1.3.6.1.4.1.1141.2.42.1.1.20 | hcxEtherPortDiagTestAction | 0 | 0 | This attribute is used to invoke the internal Ethernet card diagnostic test. In order to activate this test, the card must be pla… |
1.3.6.1.4.1.1141.2.42.1.1.21 | hcxEtherPortDiagTestResult | 0 | 0 | This attribute contains the result of the last Ethernet port diagnostic test. |
1.3.6.1.4.1.1141.2.42.1.1.22 | hcxEtherPortLinkStatusLed | 0 | 0 | The Ethernet Link Status LED is a read-only attribute which describes the condition of the Ethernet Link Status light emitting di… |
1.3.6.1.4.1.1141.2.42.1.1.24 | hcxEtherPortArpFiltRate | 0 | 0 | No longer supported |
1.3.6.1.4.1.1141.2.42.1.1.25 | hcxEtherAggrActDnStrmCbrRate | 0 | 0 | This attribute specifies the aggregate of all ComPort downstream CBR rates active on the Ethernet port (VLAN). This includes only… |
1.3.6.1.4.1.1141.2.42.1.1.26 | hcxEtherAggrActDnStrmPcrRate | 0 | 0 | This attribute specifies the aggregate of all ComPort downstream PCR rates active on the Ethernet port (VLAN). This includes only… |
1.3.6.1.4.1.1141.2.42.1.1.27 | hcxEtherAggrActUpStrmCbrRate | 0 | 0 | This attribute specifies the aggregate of all ComPort upstream CBR rates active on the Ethernet port (VLAN). This includes only a… |
1.3.6.1.4.1.1141.2.42.1.1.28 | hcxEtherAggrActUpStrmMinRate | 0 | 0 | This attribute specifies the aggregate of all ComPort upstream minimum PCR rates active on the Ethernet port (VLAN). This include… |
1.3.6.1.4.1.1141.2.42.1.1.29 | hcxEtherAggrActUpStrmMaxRate | 0 | 0 | This attribute specifies the aggregate of all ComPort upstream maximum cell rates active on the Ethernet port (VLAN). This includ… |
1.3.6.1.4.1.1141.2.42.1.1.30 | hcxEtherPortIpAddr | 0 | 0 | IP Address associated with this ethernet port. This is a future item for telephone return support. |
1.3.6.1.4.1.1141.2.42.1.1.31 | hcxEtherPortIpMask | 0 | 0 | IP mask associated with port. Default is ff.ff.ff.ff. This is a future item for telephone return support. |
1.3.6.1.4.1.1141.2.42.1.1.32 | hcxEtherPortMacAddr | 0 | 0 | MAC address associated with port. |
1.3.6.1.4.1.1141.2.42.1.1.33 | hcxEtherPortAutoNegEnable | 0 | 0 | This attribute is used for 100BaseT ports ONLY, to enable/disable Auto Negotiation Feature. Default is Auto Negotiation Enable. F… |
1.3.6.1.4.1.1141.2.42.1.1.34 | hcxEtherPortSpeedSelect | 0 | 0 | If 'hcxEtherPortAutoNegEnble' is set to 'off' then the Media speed of the port is set to the value in this attribute. This attri… |
1.3.6.1.4.1.1141.2.42.1.1.35 | hcxEtherCurrPortState | 0 | 0 | specifies the Media speed of the port. |