Contains IEEE 802 medium access control address
of the ComPort device.
Parsed from file com21.hcxstu.mib.txt
Company: None
Module: COM21-HCXSTU-MIB
Contains IEEE 802 medium access control address
of the ComPort device.
Parsed from file COM21-HCXSTU-MIB.mib
Module: COM21-HCXSTU-MIB
Vendor: Com21
Module: COM21-HCXSTU-MIB
[Automatically extracted from oidview.com]
hcxStuStatusMacAddr OBJECT-TYPE SYNTAX MacAddress MAX-ACCESS read-only STATUS current DESCRIPTION " Contains IEEE 802 medium access control address of the ComPort device." ::= { com21HcxStuStatusEntry 1 }
hcxStuStatusMacAddr OBJECT-TYPE SYNTAX MacAddress MAX-ACCESS read-only STATUS current DESCRIPTION " Contains IEEE 802 medium access control address of the ComPort device." ::= { com21HcxStuStatusEntry 1 }
OID | Name | Sub children | Sub Nodes Total | Description |
---|---|---|---|---|
1.3.6.1.4.1.1141.2.51.1.1.2 | hcxStuConfigured | 0 | 0 | This attribute defines the configured state of the ComPort. This value will be set to true when the NMAPS creates a new entry. If… |
1.3.6.1.4.1.1141.2.51.1.1.3 | hcxStuAcquired | 0 | 0 | This attribute defines the acquired state of the ComPort. Note that is state is set once an ComPort can be managed. We could have… |
1.3.6.1.4.1.1141.2.51.1.1.4 | hcxStuAcqFailInfo | 0 | 0 | This attribute provides secondary information related to an ComPort acquisition. If there is a failure in the system that prevent… |
1.3.6.1.4.1.1141.2.51.1.1.5 | hcxStuAuthorized | 0 | 0 | This attribute defines the verified state of the ComPort. This state can only be set by the NMAPS. If this attribute is false, th… |
1.3.6.1.4.1.1141.2.51.1.1.6 | hcxStuLedFlashTest | 0 | 0 | hcxStuLedFlashtest |
1.3.6.1.4.1.1141.2.51.1.1.7 | hcxStuUpstreamTest | 0 | 0 | Used to invoke an ComPort Upstream RF test. Setting the attribute to start will invoke test. Setting to stop will terminate the t… |
1.3.6.1.4.1.1141.2.51.1.1.8 | hcxStuVlanId | 0 | 0 | This attribute defines the virtual LAN id associated with the ComPort. No default, must be set. Note, in the case of an acquired … |
1.3.6.1.4.1.1141.2.51.1.1.9 | hcxStuRxShelfId | 0 | 0 | This attribute specifies the shelf id associated with the RX the ComPort is currently assigned to. If ComPort is unacquired then … |
1.3.6.1.4.1.1141.2.51.1.1.10 | hcxStuRxSlotId | 0 | 0 | This attribute specifies the slot id of the RX card to which the ComPort is currently assigned. If ComPort is unacquired then the… |
1.3.6.1.4.1.1141.2.51.1.1.11 | hcxStuRxPortId | 0 | 0 | This attribute specifies the RX port to which the ComPort is assigned. Presently only one port supported. If the ComPort is unacq… |
1.3.6.1.4.1.1141.2.51.1.1.12 | hcxStuServiceType | 0 | 0 | This attribute defines the Service Type associated with the ComPort. This equals the associated hcxServiceTypeId attribute. The de… |
1.3.6.1.4.1.1141.2.51.1.1.14 | hcxStuConfSwImage | 0 | 0 | Contains the configured software image to be downloaded to the ComPort. The Common Controller download process shall check this v… |
1.3.6.1.4.1.1141.2.51.1.1.15 | hcxStuPingTestAction | 0 | 0 | Used to invoke a ping of the ComPort. Sends an OAM Ping message. When the user reads this attribute a nil response shall be given… |
1.3.6.1.4.1.1141.2.51.1.1.16 | hcxStuPingTestResult | 0 | 0 | contains result of last ping test. invalid is returned if ping test cannot be run. Examples being an unacquired ComPort or a ComP… |
1.3.6.1.4.1.1141.2.51.1.1.17 | hcxStuEthTestAction | 0 | 0 | hcxStuEthtestAction |
1.3.6.1.4.1.1141.2.51.1.1.18 | hcxStuEthTestResult | 0 | 0 | hcxStuEthtestResult |
1.3.6.1.4.1.1141.2.51.1.1.19 | hcxStuRetPathSelect | 0 | 0 | This attribute specifies the return path mode of the ComPort. Default is two way cable. |
1.3.6.1.4.1.1141.2.51.1.1.20 | hcxStuEth8022Filter | 0 | 0 | This attribute is used to control the filtering of 802.2 Ethernet packets for a specific ComPORT. When this is enabled (true), al… |
1.3.6.1.4.1.1141.2.51.1.1.21 | hcxStuDnstrmFwdCntrl | 0 | 0 | This attribute is used to control the forwarding of packets downstream which where received in the upstream from a specific ComPO… |
1.3.6.1.4.1.1141.2.51.1.1.22 | hcxStuStatsCollect | 0 | 0 | This attribute is used to control whether statistics are collected periodically from the ComPort. Default is enable for two-way C… |
1.3.6.1.4.1.1141.2.51.1.1.23 | hcxStuPowerRangeState | 0 | 0 | This attribute describes the power ranging state of the ComPort. An unacquired ComPort or one operating within the power specific… |
1.3.6.1.4.1.1141.2.51.1.1.24 | hcxStuRpmIPortId | 0 | 0 | This attribute specifies the RPM I-Port to which the ComPort is associated. 0 will be reported if the ComPort has never been acqu… |
1.3.6.1.4.1.1141.2.51.1.1.25 | hcxStuEthLpbkTestUpRate | 0 | 0 | This attribute contains the rate recorded for the last loopback test. Will be 0 if test failed. |
1.3.6.1.4.1.1141.2.51.1.1.26 | hcxStuEthLpbkTestLatency | 0 | 0 | This attribute contains the round trip packet latency recorded by the last loopback test. Again 0 if test failed. |
1.3.6.1.4.1.1141.2.51.1.1.27 | hcxStuModelName | 0 | 0 | This attribute defines the ComPort Model Type read from the ComPort. Prior to the acquisition of the ComPort for the first time, … |
1.3.6.1.4.1.1141.2.51.1.1.28 | hcxStuEthTestDnRate | 0 | 0 | hcxStuEthtestDnRate |
1.3.6.1.4.1.1141.2.51.1.1.30 | hcxStuEthLpbkTestDuration | 0 | 0 | This attribute specifies the duration of the loopback test in seconds. Default is 5 seconds. |