This attribute provides secondary information
related to an ComPort acquisition. If there is a
failure in the system that prevents a user
from receiving full service, then it will be
indicated by this attribute. If an ComPort is
unacquired or no problems were encountered
then this attribute shall equal noFailure.
Parsed from file com21.hcxstu.mib.txt
Company: None
Module: COM21-HCXSTU-MIB
This attribute provides secondary information
related to an ComPort acquisition. If there is a
failure in the system that prevents a user
from receiving full service, then it will be
indicated by this attribute. If an ComPort is
unacquired or no problems were encountered
then this attribute shall equal noFailure.
Parsed from file COM21-HCXSTU-MIB.mib
Module: COM21-HCXSTU-MIB
Vendor: Com21
Module: COM21-HCXSTU-MIB
[Automatically extracted from oidview.com]
hcxStuAcqFailInfo OBJECT-TYPE SYNTAX INTEGER { noFailure(1), vlanFailure(2), servGrpInvalid(3), bandwidthUnavail(4), unauthorized(5) } MAX-ACCESS read-only STATUS current DESCRIPTION " This attribute provides secondary information related to an ComPort acquisition. If there is a failure in the system that prevents a user from receiving full service, then it will be indicated by this attribute. If an ComPort is unacquired or no problems were encountered then this attribute shall equal noFailure." ::= { com21HcxStuStatusEntry 4 }
hcxStuAcqFailInfo OBJECT-TYPE SYNTAX INTEGER { noFailure(1), vlanFailure(2), servGrpInvalid(3), bandwidthUnavail(4), unauthorized(5) } MAX-ACCESS read-only STATUS current DESCRIPTION " This attribute provides secondary information related to an ComPort acquisition. If there is a failure in the system that prevents a user from receiving full service, then it will be indicated by this attribute. If an ComPort is unacquired or no problems were encountered then this attribute shall equal noFailure." ::= { com21HcxStuStatusEntry 4 }
OID | Name | Sub children | Sub Nodes Total | Description |
---|---|---|---|---|
1.3.6.1.4.1.1141.2.51.1.1.1 | hcxStuStatusMacAddr | 0 | 0 | Contains IEEE 802 medium access control address of the ComPort device. |
1.3.6.1.4.1.1141.2.51.1.1.2 | hcxStuConfigured | 0 | 0 | This attribute defines the configured state of the ComPort. This value will be set to true when the NMAPS creates a new entry. If… |
1.3.6.1.4.1.1141.2.51.1.1.3 | hcxStuAcquired | 0 | 0 | This attribute defines the acquired state of the ComPort. Note that is state is set once an ComPort can be managed. We could have… |
1.3.6.1.4.1.1141.2.51.1.1.5 | hcxStuAuthorized | 0 | 0 | This attribute defines the verified state of the ComPort. This state can only be set by the NMAPS. If this attribute is false, th… |
1.3.6.1.4.1.1141.2.51.1.1.6 | hcxStuLedFlashTest | 0 | 0 | hcxStuLedFlashtest |
1.3.6.1.4.1.1141.2.51.1.1.7 | hcxStuUpstreamTest | 0 | 0 | Used to invoke an ComPort Upstream RF test. Setting the attribute to start will invoke test. Setting to stop will terminate the t… |
1.3.6.1.4.1.1141.2.51.1.1.8 | hcxStuVlanId | 0 | 0 | This attribute defines the virtual LAN id associated with the ComPort. No default, must be set. Note, in the case of an acquired … |
1.3.6.1.4.1.1141.2.51.1.1.9 | hcxStuRxShelfId | 0 | 0 | This attribute specifies the shelf id associated with the RX the ComPort is currently assigned to. If ComPort is unacquired then … |
1.3.6.1.4.1.1141.2.51.1.1.10 | hcxStuRxSlotId | 0 | 0 | This attribute specifies the slot id of the RX card to which the ComPort is currently assigned. If ComPort is unacquired then the… |
1.3.6.1.4.1.1141.2.51.1.1.11 | hcxStuRxPortId | 0 | 0 | This attribute specifies the RX port to which the ComPort is assigned. Presently only one port supported. If the ComPort is unacq… |
1.3.6.1.4.1.1141.2.51.1.1.12 | hcxStuServiceType | 0 | 0 | This attribute defines the Service Type associated with the ComPort. This equals the associated hcxServiceTypeId attribute. The de… |
1.3.6.1.4.1.1141.2.51.1.1.14 | hcxStuConfSwImage | 0 | 0 | Contains the configured software image to be downloaded to the ComPort. The Common Controller download process shall check this v… |
1.3.6.1.4.1.1141.2.51.1.1.15 | hcxStuPingTestAction | 0 | 0 | Used to invoke a ping of the ComPort. Sends an OAM Ping message. When the user reads this attribute a nil response shall be given… |
1.3.6.1.4.1.1141.2.51.1.1.16 | hcxStuPingTestResult | 0 | 0 | contains result of last ping test. invalid is returned if ping test cannot be run. Examples being an unacquired ComPort or a ComP… |
1.3.6.1.4.1.1141.2.51.1.1.17 | hcxStuEthTestAction | 0 | 0 | hcxStuEthtestAction |
1.3.6.1.4.1.1141.2.51.1.1.18 | hcxStuEthTestResult | 0 | 0 | hcxStuEthtestResult |
1.3.6.1.4.1.1141.2.51.1.1.19 | hcxStuRetPathSelect | 0 | 0 | This attribute specifies the return path mode of the ComPort. Default is two way cable. |
1.3.6.1.4.1.1141.2.51.1.1.20 | hcxStuEth8022Filter | 0 | 0 | This attribute is used to control the filtering of 802.2 Ethernet packets for a specific ComPORT. When this is enabled (true), al… |
1.3.6.1.4.1.1141.2.51.1.1.21 | hcxStuDnstrmFwdCntrl | 0 | 0 | This attribute is used to control the forwarding of packets downstream which where received in the upstream from a specific ComPO… |
1.3.6.1.4.1.1141.2.51.1.1.22 | hcxStuStatsCollect | 0 | 0 | This attribute is used to control whether statistics are collected periodically from the ComPort. Default is enable for two-way C… |
1.3.6.1.4.1.1141.2.51.1.1.23 | hcxStuPowerRangeState | 0 | 0 | This attribute describes the power ranging state of the ComPort. An unacquired ComPort or one operating within the power specific… |
1.3.6.1.4.1.1141.2.51.1.1.24 | hcxStuRpmIPortId | 0 | 0 | This attribute specifies the RPM I-Port to which the ComPort is associated. 0 will be reported if the ComPort has never been acqu… |
1.3.6.1.4.1.1141.2.51.1.1.25 | hcxStuEthLpbkTestUpRate | 0 | 0 | This attribute contains the rate recorded for the last loopback test. Will be 0 if test failed. |
1.3.6.1.4.1.1141.2.51.1.1.26 | hcxStuEthLpbkTestLatency | 0 | 0 | This attribute contains the round trip packet latency recorded by the last loopback test. Again 0 if test failed. |
1.3.6.1.4.1.1141.2.51.1.1.27 | hcxStuModelName | 0 | 0 | This attribute defines the ComPort Model Type read from the ComPort. Prior to the acquisition of the ComPort for the first time, … |
1.3.6.1.4.1.1141.2.51.1.1.28 | hcxStuEthTestDnRate | 0 | 0 | hcxStuEthtestDnRate |
1.3.6.1.4.1.1141.2.51.1.1.30 | hcxStuEthLpbkTestDuration | 0 | 0 | This attribute specifies the duration of the loopback test in seconds. Default is 5 seconds. |