This object represents the unique identifier for a
row in the Modulator Config table. The value of
this object corresponds to the physical slot the
MOS-01 card is installed in.
Parsed from file act.mib.txt
Company: cai
Module: ACT-FP-MOD-DEMOD
Vendor: Computer Associates
Module: ACT-CONSTANTS (act.mib)
Type: TABULAR
Access: read-only
Syntax: INTEGER
(
1..8 )
Automatically extracted from www.mibdepot.com
actFpModulatorSlot OBJECT-TYPE SYNTAX INTEGER(1..8) ACCESS read-only STATUS mandatory DESCRIPTION "This object represents the unique identifier for a row in the Modulator Config table. The value of this object corresponds to the physical slot the MOS-01 card is installed in." ::= { actFpModulatorConfigEntry 1 }
OID | Name | Sub children | Sub Nodes Total | Description |
---|---|---|---|---|
1.3.6.1.4.1.1186.2.2.1.9.1.1.1.1.2 | actFpModIfFrequency | 0 | 0 | This object specifies the intermediate transmission frequency in kiloHertz (kHz). Supported values are in increments of 5kHz, ma… |
1.3.6.1.4.1.1186.2.2.1.9.1.1.1.1.3 | actFpModIfLevel | 0 | 0 | This object specifies the IF Transmission Level in -dB. The units are in increments of -0.5 dB, making the actual valid range bet… |
1.3.6.1.4.1.1186.2.2.1.9.1.1.1.1.4 | actFpModCarrierId | 0 | 0 | This object represents the physical port within the satellite system. It is used to uniquely identify this station. |
1.3.6.1.4.1.1186.2.2.1.9.1.1.1.1.5 | actFpModBitRate | 0 | 0 | This object specifies the Transmission Data Rate. This object interacts with the objects actFpModFecRatio and actFpModPhaseModula… |
1.3.6.1.4.1.1186.2.2.1.9.1.1.1.1.6 | actFpModFecRatio | 0 | 0 | This object specifies the number of bits transmitted for each actual data bit. The value twoForOne(1) means that two bits are tr… |
1.3.6.1.4.1.1186.2.2.1.9.1.1.1.1.7 | actFpModPhaseModulation | 0 | 0 | This object specifies the type of phase modulation used when transmitting the signal. continuousWave(3) and sin(4) do not use any… |
1.3.6.1.4.1.1186.2.2.1.9.1.1.1.1.8 | actFpModV35Scrambler | 0 | 0 | This object specifies the type of V.35 Scrambler used prior to transmitting the signal. |
1.3.6.1.4.1.1186.2.2.1.9.1.1.1.1.9 | actFpModTransmitterState | 0 | 0 | This object controls the state of the transmitter. When this object maintains the value off(1), the transmission level is guarant… |
1.3.6.1.4.1.1186.2.2.1.9.1.1.1.1.10 | actFpModRfType | 0 | 0 | actFpModRftype |