This object specifies the type of phase
modulation used when transmitting the signal.
continuousWave(3) and sin(4) do not use any
form of phase modulation when transmitting.
Note well that continuousWave(3) and sin(4) are
test configurations; setting the Phase Modulation
to either of these values has the potential
side effect of making the unit inaccessible.
This object interacts with the objects
actFpModBitRate and actFpModFecRatio in that
the value bpsk(2) cannot be SET if either the
BitRate maintains a value of kbps256(4) or the
FecRatio maintains a value of fourForThree(2).
There are no restrictions associated with either
continuousWave(3) or sin(4).
Thus, the set of allowable configurations are as
follows:
BitRate FecRatio PhaseModulation
kbps32(1) twoForOne(1) qpsk(1)
kbps32(1) twoForOne(1) bpsk(2)
kbps64(2) twoForOne(1) qpsk(1)
kbps64(2) twoForOne(1) bpsk(2)
kbps64(2) fourForThree(2) qpsk(1)
kbps128(3) twoForOne(1) qpsk(1)
kbps128(3) twoForOne(1) bpsk(2)
kbps128(3) fourForThree(2) qpsk(1)
kbps256(4) twoForOne(1) qpsk(1)
kbps256(4) fourForThree(2) qpsk(1)
Parsed from file act.mib.txt
Company: cai
Module: ACT-FP-MOD-DEMOD
Vendor: Computer Associates
Module: ACT-CONSTANTS (act.mib)
Type: TABULAR
Access: read-write
Syntax: INTEGER
Automatically extracted from www.mibdepot.com
actFpModPhaseModulation OBJECT-TYPE SYNTAX INTEGER { qpsk(1), bpsk(2), continuousWave(3), sin(4) } ACCESS read-write STATUS mandatory DESCRIPTION "This object specifies the type of phase modulation used when transmitting the signal. continuousWave(3) and sin(4) do not use any form of phase modulation when transmitting. Note well that continuousWave(3) and sin(4) are test configurations; setting the Phase Modulation to either of these values has the potential side effect of making the unit inaccessible. This object interacts with the objects actFpModBitRate and actFpModFecRatio in that the value bpsk(2) cannot be SET if either the BitRate maintains a value of kbps256(4) or the FecRatio maintains a value of fourForThree(2). There are no restrictions associated with either continuousWave(3) or sin(4). Thus, the set of allowable configurations are as follows: BitRate FecRatio PhaseModulation kbps32(1) twoForOne(1) qpsk(1) kbps32(1) twoForOne(1) bpsk(2) kbps64(2) twoForOne(1) qpsk(1) kbps64(2) twoForOne(1) bpsk(2) kbps64(2) fourForThree(2) qpsk(1) kbps128(3) twoForOne(1) qpsk(1) kbps128(3) twoForOne(1) bpsk(2) kbps128(3) fourForThree(2) qpsk(1) kbps256(4) twoForOne(1) qpsk(1) kbps256(4) fourForThree(2) qpsk(1)
continuousWave(3) sin(4)" ::= { actFpModulatorConfigEntry 7 }
| OID | Name | Sub children | Sub Nodes Total | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.1186.2.2.1.9.1.1.1.1.1 | actFpModulatorSlot | 0 | 0 | This object represents the unique identifier for a row in the Modulator Config table. The value of this object corresponds to th… |
| 1.3.6.1.4.1.1186.2.2.1.9.1.1.1.1.2 | actFpModIfFrequency | 0 | 0 | This object specifies the intermediate transmission frequency in kiloHertz (kHz). Supported values are in increments of 5kHz, ma… |
| 1.3.6.1.4.1.1186.2.2.1.9.1.1.1.1.3 | actFpModIfLevel | 0 | 0 | This object specifies the IF Transmission Level in -dB. The units are in increments of -0.5 dB, making the actual valid range bet… |
| 1.3.6.1.4.1.1186.2.2.1.9.1.1.1.1.4 | actFpModCarrierId | 0 | 0 | This object represents the physical port within the satellite system. It is used to uniquely identify this station. |
| 1.3.6.1.4.1.1186.2.2.1.9.1.1.1.1.5 | actFpModBitRate | 0 | 0 | This object specifies the Transmission Data Rate. This object interacts with the objects actFpModFecRatio and actFpModPhaseModula… |
| 1.3.6.1.4.1.1186.2.2.1.9.1.1.1.1.6 | actFpModFecRatio | 0 | 0 | This object specifies the number of bits transmitted for each actual data bit. The value twoForOne(1) means that two bits are tr… |
| 1.3.6.1.4.1.1186.2.2.1.9.1.1.1.1.8 | actFpModV35Scrambler | 0 | 0 | This object specifies the type of V.35 Scrambler used prior to transmitting the signal. |
| 1.3.6.1.4.1.1186.2.2.1.9.1.1.1.1.9 | actFpModTransmitterState | 0 | 0 | This object controls the state of the transmitter. When this object maintains the value off(1), the transmission level is guarant… |
| 1.3.6.1.4.1.1186.2.2.1.9.1.1.1.1.10 | actFpModRfType | 0 | 0 | actFpModRftype |