This module contains the definitions for statistics collected for
OAM Performance Monitoring. The definition and requirement for
these statistics are found in GR-1248-CORE. In addition, Cell
Loss Ratio has been added as part of the Newbridge extension.
This MIB module contains the following tables:
OAM PM 15 Minute Current Table
OAM PM 15 Minute Interval Table
OAM PM 24 Hour Current Table
OAM PM 24 Hour Interval Table
These tables are heavily influenced by the definition of VPL/VCL
described in rfc1695. The number of intervals supported is dependent upon
resource availibility on any given product, but should nominally be 32
for 15 Minute intervals and 2 for 24 Hour intervals. To avoid building
in massive amounts of storage, some products may adopt a bulk
collection scheme.
Intervals:
Statistics on the performance of VPL/VCLs are collected over a
historical stratum of up to a maximum of M intervals. The value of M
is a function of a product's storage capability. For example, on the
36170 product, M = 32 for 15 Minute interval.
The 15 Minute intervals are aligned to the quarter of one hour of a
wall clock. The current interval spans back to the last 15 minute
tick on the wall clock. Continuing along the timeline from that point
is the most recently completed interval and has an index of 1. The
previous interval has an index of 2 and so on. Note that the oldest
interval may be incomplete since the statistic collection may have
been enabled offset to the quarter or one hour tick.
t
0 -1i -2i -3i
===========|===========|===========|===========|===========
current N = 1 N = 2 N = 3 N = 4 ... N = M
interval
Performance Monitoring Demarcation Values:
As defined in GR-1248-CORE, three demarcation values are defined to
evaluate the condition of a PM cell block. These are M errored, M lost
and M misinserted. These values are configurable on a system-wide basis.
Where applicable, the definition of a statistics object in this module
will refer to one or more of these values.
Parsed from file Newbridge.smi.txt
Company: None
Module: NNCGNI0001-SMI
This module contains the definitions for statistics collected for
OAM Performance Monitoring. The definition and requirement for
these statistics are found in GR-1248-CORE. In addition, Cell
Loss Ratio has been added as part of the Newbridge extension.
This MIB module contains the following tables:
OAM PM 15 Minute Current Table
OAM PM 15 Minute Interval Table
OAM PM 24 Hour Current Table
OAM PM 24 Hour Interval Table
These tables are heavily influenced by the definition of VPL/VCL
described in rfc1695. The number of intervals supported is dependent upon
resource availibility on any given product, but should nominally be 32
for 15 Minute intervals and 2 for 24 Hour intervals. To avoid building
in massive amounts of storage, some products may adopt a bulk
collection scheme.
Intervals:
Statistics on the performance of VPL/VCLs are collected over a
historical stratum of up to a maximum of M intervals. The value of M
is a function of a product's storage capability. For example, on the
36170 product, M = 32 for 15 Minute interval.
The 15 Minute intervals are aligned to the quarter of one hour of a
wall clock. The current interval spans back to the last 15 minute
tick on the wall clock. Continuing along the timeline from that point
is the most recently completed interval and has an index of 1. The
previous interval has an index of 2 and so on. Note that the oldest
interval may be incomplete since the statistic collection may have
been enabled offset to the quarter or one hour tick.
t
0 -1i -2i -3i
===========|===========|===========|===========|===========
current N = 1 N = 2 N = 3 N = 4 ... N = M
interval
Performance Monitoring Demarcation Values:
As defined in GR-1248-CORE, three demarcation values are defined to
evaluate the condition of a PM cell block. These are M errored, M lost
and M misinserted. These values are configurable on a system-wide basis.
Where applicable, the definition of a statistics object in this module
will refer to one or more of these values.
Parsed from file NNCGNI0001-SMI.mib
Module: NNCGNI0001-SMI
Vendor: Newbridge Networks Corporation
Module: NNC-EXT-PM-STATISTICS-MIB
[Automatically extracted from oidview.com]
nncExtPmStatistics OBJECT IDENTIFIER ::= { nncExtensions 65}
nncExtPmStatistics OBJECT IDENTIFIER ::= { nncExtensions 65}
| OID | Name | Sub children | Sub Nodes Total | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.123.3.65.1 | nncExtPmStatisticsObjects | 4 | 80 | None |
| 1.3.6.1.4.1.123.3.65.2 | nncExtPmStatisticsTraps | 0 | 0 | None |
| 1.3.6.1.4.1.123.3.65.3 | nncExtPmStatisticsGroups | 4 | 4 | None |
| 1.3.6.1.4.1.123.3.65.4 | nncExtPmStatisticsCompliances | 1 | 1 | None |
| OID | Name | Sub children | Sub Nodes Total | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.123.3.1 | nncExtSystem | 6 | 16 | None |
| 1.3.6.1.4.1.123.3.2 | nncExtEnvironmental | 6 | 16 | None |
| 1.3.6.1.4.1.123.3.3 | nncExtRestart | 9 | 22 | None |
| 1.3.6.1.4.1.123.3.4 | nncExtCodeSpace | 4 | 19 | None |
| 1.3.6.1.4.1.123.3.5 | nncExtNVM | 2 | 7 | None |
| 1.3.6.1.4.1.123.3.6 | nncExtAlarm | 6 | 30 | None |
| 1.3.6.1.4.1.123.3.7 | nncExtNetSynch | 3 | 14 | None |
| 1.3.6.1.4.1.123.3.8 | nncExtPosition | 4 | 22 | None |
| 1.3.6.1.4.1.123.3.9 | nncExtDevice | 1 | 15 | None |
| 1.3.6.1.4.1.123.3.10 | nncExtDs1 | 8 | 72 | None |
| 1.3.6.1.4.1.123.3.11 | nncExtRptr | 2 | 18 | None |
| 1.3.6.1.4.1.123.3.12 | nncExtProbe | 1 | 3 | None |
| 1.3.6.1.4.1.123.3.13 | nncExtDiag | 2 | 4 | None |
| 1.3.6.1.4.1.123.3.14 | nncExtSyncDataCct | 2 | 14 | None |
| 1.3.6.1.4.1.123.3.29 | nncAtmStatistics | 4 | 179 | This module contains definitions for performance monitoring of the ATM layer and it's circuits. This MIB module contains the foll… |
| 1.3.6.1.4.1.123.3.30 | nncFrIntStatistics | 4 | 258 | This module contains definitions for performance monitoring of Frame Relay Streams |
| 1.3.6.1.4.1.123.3.31 | nncExtIntvlStats | 0 | 0 | The MIB module containing type definitions common to interval statistics collection mibs. |
| 1.3.6.1.4.1.123.3.32 | nncExtSVCSigStats | 4 | 177 | The MIB module containing management information for performance monitoring of SVC Signalling functions. |
| 1.3.6.1.4.1.123.3.40 | nncExtE3 | 4 | 43 | This module contains definitions for Newbridge extensions to E3 objects. It is used as a supplement to rfc1407. |
| 1.3.6.1.4.1.123.3.43 | nncExtMultiBridge | 5 | 85 | Newbridge's multi-BRIDGE MIB Module. for nodes which implements more than one bridge entity. |
| 1.3.6.1.4.1.123.3.44 | nncExtNotif | 4 | 85 | This MIB module contains information regarding Alarm and Trouble Ticket information forwarding as Notifications. |
| 1.3.6.1.4.1.123.3.47 | nncCEFillLevelStatistics | 3 | 9 | This module contains definitions for monitoring aal1 fill level statistics. |
| 1.3.6.1.4.1.123.3.49 | nncExtServiceNotif | 4 | 61 | This MIB module contains information regarding Service status information forwarded as Notifications. |
| 1.3.6.1.4.1.123.3.50 | nncExtPktStatistics | 4 | 59 | This module contains definitions for performance monitoring of the packets routed. This MIB module contains the following tables:… |
| 1.3.6.1.4.1.123.3.54 | nncAtmProtoStatistics | 3 | 38 | This module contains definitions for performance monitoring of the ATM cell layers. This MIB module contains the following tables… |
| 1.3.6.1.4.1.123.3.63 | nncAtmCongestionStatistics | 3 | 96 | This module contains the definitions for congestion statistics on ATM products. Congestion statistics allow the user to monitor… |
| 1.3.6.1.4.1.123.3.64 | nncSdslStatistics | 1 | 60 | This module contains definitions for SDSL Ports Stats. |
| 1.3.6.1.4.1.123.3.69 | nncExtNEInventory | 3 | 22 | This module contains definition for monitoring the inventory of network elements in a network. The module can be used to query t… |
| 1.3.6.1.4.1.123.3.70 | nncBellcoreGR820Ds1Statistics | 3 | 47 | This module contains the definitions for the Bellcore GR820 statistics for DS1 lines. |
| 1.3.6.1.4.1.123.3.71 | nncAAL5 | 4 | 17 | This module contains definitions for monitoring and configuring AAL5 information on Newbridge ATM cards. |
| 1.3.6.1.4.1.123.3.72 | nncVS | 4 | 29 | This module contains definitions for monitoring and configuring Newbridge Voiceband Services cards. |
| 1.3.6.1.4.1.123.3.78 | nncExtRoutingStats | 3 | 467 | This MIB module contains management information for performance monitoring of call routing statistics. Seven types of statistics … |
| 1.3.6.1.4.1.123.3.79 | nncExtPvc | 3 | 84 | This module contains Alcatel's proprietary MIB definition for managing point-to-point and point-to-multipoint Permanent Virtual C… |
| 1.3.6.1.4.1.123.3.80 | nncExtVpttp | 3 | 8 | This module contains Alcatel's proprietary MIB definition for configuration of VP Trail Termination Points. This support is is pr… |
| 1.3.6.1.4.1.123.3.82 | nncExtSpvc | 3 | 213 | This module contains Alcatel CID's proprietary MIB definition for managing Soft Permanent Virtual Connections (SPVCs). This MIB s… |