ABR traffic Rate Increase Factor for the forward direction.
Value is expressed as the -power of 2.
Range: 0 - 9
Parsed from file NncExtPVC.mib.txt
Company: None
Module: NNCEXTPVC-MIB
ABR traffic Rate Increase Factor for the forward direction.
Value is expressed as the -power of 2.
Range: 0 - 9
Parsed from file NNCEXTPVC-MIB.mib
Module: NNCEXTPVC-MIB
Vendor: Newbridge Networks Corporation
Module: NNCEXTPVC-MIB
[Automatically extracted from oidview.com]
nncCrPvpcFwdAbrDynTrfcRif OBJECT-TYPE SYNTAX INTEGER (0..9) MAX-ACCESS read-create STATUS current DESCRIPTION "ABR traffic Rate Increase Factor for the forward direction. Value is expressed as the -power of 2. Range: 0 - 9" DEFVAL { 9 } ::= { nncCrPvpcTableEntry 9 }
nncCrPvpcFwdAbrDynTrfcRif OBJECT-TYPE SYNTAX INTEGER (0..9) MAX-ACCESS read-create STATUS current DESCRIPTION "ABR traffic Rate Increase Factor for the forward direction. Value is expressed as the -power of 2. Range: 0 - 9" DEFVAL { 9 } ::= { nncCrPvpcTableEntry 9 }
OID | Name | Sub children | Sub Nodes Total | Description |
---|---|---|---|---|
1.3.6.1.4.1.123.3.79.1.1.1.1 | nncCrPvpcSrcIfIndex | 0 | 0 | This object contains the ifIndex value for the source endpoint |
1.3.6.1.4.1.123.3.79.1.1.1.2 | nncCrPvpcSrcVpi | 0 | 0 | This object contains the VPI value for the source endpoint. |
1.3.6.1.4.1.123.3.79.1.1.1.3 | nncCrPvpcDstIfIndex | 0 | 0 | This object contains the ifIndex value for the destination endpoint |
1.3.6.1.4.1.123.3.79.1.1.1.4 | nncCrPvpcDstVpi | 0 | 0 | This object contains the VPI value for the destination endpoint. |
1.3.6.1.4.1.123.3.79.1.1.1.5 | nncCrPvpcCastType | 0 | 0 | This object is used to indicate whether the PVPC is point-to-point or point-to-multipoint |
1.3.6.1.4.1.123.3.79.1.1.1.6 | nncCrPvpcFwdServiceCategory | 0 | 0 | This object is used to set the traffic service category from source endpoint to destination endpoint. This object is dependent on… |
1.3.6.1.4.1.123.3.79.1.1.1.7 | nncCrPvpcBwdServiceCategory | 0 | 0 | This object is used to set the traffic service category from destination endpoint to source endpoint. This object is dependent on… |
1.3.6.1.4.1.123.3.79.1.1.1.8 | nncCrPvpcFwdAbrDynTrfcIcr | 0 | 0 | ABR dynamic traffic descriptor's Initial Cell Rate for the forward direction. Range: 0 - 2488320 Kb/s |
1.3.6.1.4.1.123.3.79.1.1.1.10 | nncCrPvpcFwdAbrDynTrfcRdf | 0 | 0 | ABR traffic Rate Decrease Factor descriptor for the forward direction. Value is expressed as the -power of 2 Range: 0 - 9 |
1.3.6.1.4.1.123.3.79.1.1.1.11 | nncCrPvpcBwdAbrDynTrfcIcr | 0 | 0 | ABR dynamic traffic descriptor's Initial Cell Rate for the destination endpoint. Range: 0 - 2488320 Kb/s |
1.3.6.1.4.1.123.3.79.1.1.1.12 | nncCrPvpcBwdAbrDynTrfcRif | 0 | 0 | ABR traffic Rate Increase Factor for the destination endpoint. Value is expressed as the -power of 2. Range: 0 - 9 |
1.3.6.1.4.1.123.3.79.1.1.1.13 | nncCrPvpcBwdAbrDynTrfcRdf | 0 | 0 | ABR traffic Rate Decrease Factor descriptor for the destination endpoint. Value is expressed as the -power of 2 Range: 0 - 9 |
1.3.6.1.4.1.123.3.79.1.1.1.14 | nncCrPvpcSrcBillingFlag | 0 | 0 | Billing Configuration for the source endpoint. |
1.3.6.1.4.1.123.3.79.1.1.1.15 | nncCrPvpcDstBillingFlag | 0 | 0 | Billing Configuration for the destination endpoint. |
1.3.6.1.4.1.123.3.79.1.1.1.16 | nncCrPvpcFwdTmTrafficDescriptor | 0 | 0 | This object contains the traffic descriptor for the SPVC. None (0) (Not applicable,the case of a P2MP leaf) Tag All … |
1.3.6.1.4.1.123.3.79.1.1.1.17 | nncCrPvpcFwdTmPolicingOption | 0 | 0 | Policing Option for a PVPC. The tag option is supported only on rt-VBR/nrt-VBR connections that use the P_0_1/S_0 traffic descrip… |
1.3.6.1.4.1.123.3.79.1.1.1.18 | nncCrPvpcFwdTmBucketOneRate | 0 | 0 | This object is used for peak cell rate (PCR), the cell rate which the source may never exceed. It is used to determine which cel… |
1.3.6.1.4.1.123.3.79.1.1.1.19 | nncCrPvpcFwdTmBucketOneCdvt | 0 | 0 | This object is used to set cell delay variation tolerance (CDVT) for one end point, measured in microseconds. Range: 1 - 190,000 … |
1.3.6.1.4.1.123.3.79.1.1.1.20 | nncCrPvpcFwdTmBucketTwoRate | 0 | 0 | SIR_0p, SIR_0+1p or MIR_0+1p. This parameter holds the sustained information rate for for VBR traffic, and the minimum informati… |
1.3.6.1.4.1.123.3.79.1.1.1.21 | nncCrPvpcFwdTmBucketTwoMbs | 0 | 0 | This object is for the maximum burst size, in cells, for SIR_0p or SIR_0+1p (nrt-VBR and rt-VBR only). Range: 1 - 10000 cells |
1.3.6.1.4.1.123.3.79.1.1.1.22 | nncCrPvpcFwdTmCdv | 0 | 0 | This value is to set the cell delay variation (CDV) between two PVC endpoints when using the rt-VBR service category.. Range: 250… |
1.3.6.1.4.1.123.3.79.1.1.1.23 | nncCrPvpcFwdTmClr | 0 | 0 | The object is to set the cell loss ratio (CLR) between two PVC endpoints when using the nrt-VBR service category. Value set as 1.… |
1.3.6.1.4.1.123.3.79.1.1.1.24 | nncCrPvpcBwdTmTrafficDescriptor | 0 | 0 | This object contains the traffic descriptor for the PVC. None (0) (Not applicable,the case of a P2MP leaf) Tag All … |
1.3.6.1.4.1.123.3.79.1.1.1.25 | nncCrPvpcBwdTmPolicingOption | 0 | 0 | Policing Option for a PVPC. The tag option is supported only on rt-VBR/nrt-VBR connections that use the P_0_1/S_0 traffic descrip… |
1.3.6.1.4.1.123.3.79.1.1.1.26 | nncCrPvpcBwdTmBucketOneRate | 0 | 0 | This object is used for peak cell rate (PCR), the cell rate which the source may never exceed. It is used to determine which cel… |
1.3.6.1.4.1.123.3.79.1.1.1.27 | nncCrPvpcBwdTmBucketOneCdvt | 0 | 0 | This object is used to set cell delay variation tolerance (CDVT) for one end point, measured in microseconds. Range: 1 - 190,000 … |
1.3.6.1.4.1.123.3.79.1.1.1.28 | nncCrPvpcBwdTmBucketTwoRate | 0 | 0 | SIR_0p, SIR_0+1p or MIR_0+1p. This parameter holds the sustained information rate for for VBR traffic, and the minimum informati… |
1.3.6.1.4.1.123.3.79.1.1.1.29 | nncCrPvpcBwdTmBucketTwoMbs | 0 | 0 | This object is to set the maximum burst size, in cells, for SIR_0p or SIR_0+1p. Used for burst traffic. Range: 1 - 10000 cells |
1.3.6.1.4.1.123.3.79.1.1.1.30 | nncCrPvpcBwdTmCdv | 0 | 0 | This value is to set the cell delay variation (CDV) between two PVC endpoints when using the rt-VBR service category. Range: 250-… |
1.3.6.1.4.1.123.3.79.1.1.1.31 | nncCrPvpcBwdTmClr | 0 | 0 | The object is to set the cell loss ratio (CLR) between two PVC endpoints when using the nrt-VBR service category. Value set as 1.… |
1.3.6.1.4.1.123.3.79.1.1.1.32 | nncCrPvpcSrcAlsConfig | 0 | 0 | This object is used to set OAM Alarm Surveillance configuration for the source endpoint. |
1.3.6.1.4.1.123.3.79.1.1.1.33 | nncCrPvpcDstAlsConfig | 0 | 0 | This object is used to set OAM Alarm Surveillance configuration for the destination endpoint. |
1.3.6.1.4.1.123.3.79.1.1.1.34 | nncCrPvpcCreator | 0 | 0 | The object retrieves the creator of a PVC connection. |
1.3.6.1.4.1.123.3.79.1.1.1.35 | nncCrPvpcRowStatus | 0 | 0 | This object is to control a row creation of a CR PVPC. When RowStatus is createAndWait, information for a row is cached in memor… |