This object is to control a row creation of a CR PVCC. When
RowStatus is createAndWait, information for a row is cached in memory;
when RowStatus is set to createAndGo or active, it indicates that
all information is to be written to permanent storage, and the
PVCC to be enabled.
When querying the object, 'active' indicates the PVCC is physically
connected and data traffic can flow. The Rowstatus of 'notInService'
indicates the PVCC is physically connected but data cannot flow.
If the RowStatus value of 'notReady' is returned, it indicates either
the PVCC is not physically connected (ie. configured only) or the SNMP
agent is awaiting further information before setting up the connection.
When deleting a connection, use this object with the value 'destroy'
Parsed from file NncExtPVC.mib.txt
Company: None
Module: NNCEXTPVC-MIB
This object is to control a row creation of a CR PVCC. When
RowStatus is createAndWait, information for a row is cached in memory;
when RowStatus is set to createAndGo or active, it indicates that
all information is to be written to permanent storage, and the
PVCC to be enabled.
When querying the object, 'active' indicates the PVCC is physically
connected and data traffic can flow. The Rowstatus of 'notInService'
indicates the PVCC is physically connected but data cannot flow.
If the RowStatus value of 'notReady' is returned, it indicates either
the PVCC is not physically connected (ie. configured only) or the SNMP
agent is awaiting further information before setting up the connection.
When deleting a connection, use this object with the value 'destroy'
Parsed from file NNCEXTPVC-MIB.mib
Module: NNCEXTPVC-MIB
Vendor: Newbridge Networks Corporation
Module: NNCEXTPVC-MIB
[Automatically extracted from oidview.com]
nncCrPvccRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "This object is to control a row creation of a CR PVCC. When RowStatus is createAndWait, information for a row is cached in memory; when RowStatus is set to createAndGo or active, it indicates that all information is to be written to permanent storage, and the PVCC to be enabled. When querying the object, 'active' indicates the PVCC is physically connected and data traffic can flow. The Rowstatus of 'notInService' indicates the PVCC is physically connected but data cannot flow. If the RowStatus value of 'notReady' is returned, it indicates either the PVCC is not physically connected (ie. configured only) or the SNMP agent is awaiting further information before setting up the connection. When deleting a connection, use this object with the value 'destroy'" ::= {nncCrPvccTableEntry 39 }
nncCrPvccRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "This object is to control a row creation of a CR PVCC. When RowStatus is createAndWait, information for a row is cached in memory; when RowStatus is set to createAndGo or active, it indicates that all information is to be written to permanent storage, and the PVCC to be enabled. When querying the object, 'active' indicates the PVCC is physically connected and data traffic can flow. The Rowstatus of 'notInService' indicates the PVCC is physically connected but data cannot flow. If the RowStatus value of 'notReady' is returned, it indicates either the PVCC is not physically connected (ie. configured only) or the SNMP agent is awaiting further information before setting up the connection. When deleting a connection, use this object with the value 'destroy'" ::= {nncCrPvccTableEntry 39 }
OID | Name | Sub children | Sub Nodes Total | Description |
---|---|---|---|---|
1.3.6.1.4.1.123.3.79.1.2.1.1 | nncCrPvccSrcIfIndex | 0 | 0 | This object contains the ifIndex value for the source endpoint. |
1.3.6.1.4.1.123.3.79.1.2.1.2 | nncCrPvccSrcVpi | 0 | 0 | This object contains the VPI value for the source endpoint. |
1.3.6.1.4.1.123.3.79.1.2.1.3 | nncCrPvccSrcVci | 0 | 0 | This object contains the VCI value for the source endpoint. |
1.3.6.1.4.1.123.3.79.1.2.1.4 | nncCrPvccDstIfIndex | 0 | 0 | This object contains the ifIndex value for the destination endpoint. |
1.3.6.1.4.1.123.3.79.1.2.1.5 | nncCrPvccDstVpi | 0 | 0 | This object contains the VPI value for the destination endpoint. |
1.3.6.1.4.1.123.3.79.1.2.1.6 | nncCrPvccDstVci | 0 | 0 | This object contains the VCI value for the destination endpoint. |
1.3.6.1.4.1.123.3.79.1.2.1.7 | nncCrPvccCastType | 0 | 0 | This object is used to indicate whether the PVCC is point-to-point or point-to-multipoint |
1.3.6.1.4.1.123.3.79.1.2.1.8 | nncCrPvccFwdServiceCategory | 0 | 0 | This object is used to set the traffic service category from source endpoint to destination endpoint. This object is dependent on… |
1.3.6.1.4.1.123.3.79.1.2.1.9 | nncCrPvccBwdServiceCategory | 0 | 0 | This object is used to set the traffic service category from destination end point to source endpoint. This object is dependent o… |
1.3.6.1.4.1.123.3.79.1.2.1.10 | nncCrPvccFwdAbrDynTrfcIcr | 0 | 0 | ABR dynamic traffic descriptor's Initial Cell Rate for the forward direction. Range: 0 - 2488320 Kb/s |
1.3.6.1.4.1.123.3.79.1.2.1.11 | nncCrPvccFwdAbrDynTrfcRif | 0 | 0 | ABR traffic Rate Increase Factor for the forward direction. Value is expressed as the -power of 2. Range: 0 - 9 |
1.3.6.1.4.1.123.3.79.1.2.1.12 | nncCrPvccFwdAbrDynTrfcRdf | 0 | 0 | ABR traffic Rate Decrease Factor descriptor for the forward direction. Value is expressed as the -power of 2 Range: 0 - 9 |
1.3.6.1.4.1.123.3.79.1.2.1.13 | nncCrPvccBwdAbrDynTrfcIcr | 0 | 0 | ABR dynamic traffic descriptor's Initial Cell Rate for the destination endpoint. Range: 0 - 2488320 Kb/s |
1.3.6.1.4.1.123.3.79.1.2.1.14 | nncCrPvccBwdAbrDynTrfcRif | 0 | 0 | ABR traffic Rate Increase Factor for the destination endpoint. Value is expressed as the -power of 2. Range: 0 - 9 |
1.3.6.1.4.1.123.3.79.1.2.1.15 | nncCrPvccBwdAbrDynTrfcRdf | 0 | 0 | ABR traffic Rate Decrease Factor descriptor for the destination endpoint. Value is expressed as the -power of 2 Range: 0 - 9 |
1.3.6.1.4.1.123.3.79.1.2.1.16 | nncCrPvccSrcBillingFlag | 0 | 0 | Billing Configuration for the source endpoint. |
1.3.6.1.4.1.123.3.79.1.2.1.17 | nncCrPvccDstBillingFlag | 0 | 0 | Billing Configuration for the destination endpoint. |
1.3.6.1.4.1.123.3.79.1.2.1.18 | nncCrPvccFwdTmTrafficDescriptor | 0 | 0 | This object contains the traffic descriptor for the PVC. None (0) (Not applicable,the case of a P2MP leaf) Tag All … |
1.3.6.1.4.1.123.3.79.1.2.1.19 | nncCrPvccFwdTmPolicingOption | 0 | 0 | Policing Option for a PVcC. The tag option is supported only on rt-VBR/nrt-VBR connections that use the P_0_1/S_0 traffic descrip… |
1.3.6.1.4.1.123.3.79.1.2.1.20 | nncCrPvccFwdTmBucketOneRate | 0 | 0 | This object is used for peak cell rate (PCR), the cell rate which the source may never exceed. It is used to determine which cel… |
1.3.6.1.4.1.123.3.79.1.2.1.21 | nncCrPvccFwdTmBucketOneCdvt | 0 | 0 | This object is used to set cell delay variation tolerance (CDVT) for one end point, measured in microseconds. Range: 1 - 190,000 … |
1.3.6.1.4.1.123.3.79.1.2.1.22 | nncCrPvccFwdTmBucketTwoRate | 0 | 0 | SIR_0p, SIR_0+1p or MIR_0+1p. This parameter holds the sustained information rate for for VBR traffic, and the minimum informati… |
1.3.6.1.4.1.123.3.79.1.2.1.23 | nncCrPvccFwdTmBucketTwoMbs | 0 | 0 | This object is for the maximum burst size, in cells, for SIR_0p or SIR_0+1p (nrt-VBR and rt-VBR only). Range: 1 - 10000 cells |
1.3.6.1.4.1.123.3.79.1.2.1.24 | nncCrPvccFwdTmCdv | 0 | 0 | This value is to set the cell delay variation (CDV) between two PVC endpoints when using the rt-VBR service category. Range: 250-… |
1.3.6.1.4.1.123.3.79.1.2.1.25 | nncCrPvccFwdTmClr | 0 | 0 | The object is to set the cell loss ratio (CLR) between two PVC endpoints when using the nrt-VBR service category. Value set as 1.… |
1.3.6.1.4.1.123.3.79.1.2.1.26 | nncCrPvccFwdTmFrameDiscard | 0 | 0 | The Frame (AAL protocol data unit) Discard option. When enabled, cells are discarded at the frame level by examining the SDU-ty… |
1.3.6.1.4.1.123.3.79.1.2.1.27 | nncCrPvccBwdTmTrafficDescriptor | 0 | 0 | This object contains the traffic descriptor for the SPVC. None (0) (Not applicable,the case of a P2MP leaf) Tag All … |
1.3.6.1.4.1.123.3.79.1.2.1.28 | nncCrPvccBwdTmPolicingOption | 0 | 0 | Policing Option for an PVCC. The tag option is supported only on rt-VBR/nrt-VBR connections that use the P_0_1/S_0 traffic descri… |
1.3.6.1.4.1.123.3.79.1.2.1.29 | nncCrPvccBwdTmBucketOneRate | 0 | 0 | This object is used for peak cell rate (PCR), the cell rate which the source may never exceed. It is used to determine which cel… |
1.3.6.1.4.1.123.3.79.1.2.1.30 | nncCrPvccBwdTmBucketOneCdvt | 0 | 0 | This object is used to set cell delay variation tolerance (CDVT) for one end point, measured in microseconds. Range: 1 - 190,000 … |
1.3.6.1.4.1.123.3.79.1.2.1.31 | nncCrPvccBwdTmBucketTwoRate | 0 | 0 | SIR_0p, SIR_0+1p or MIR_0+1p. This parameter holds the sustained information rate for for VBR traffic, and the minimum informati… |
1.3.6.1.4.1.123.3.79.1.2.1.32 | nncCrPvccBwdTmBucketTwoMbs | 0 | 0 | This object is for the maximum burst size, in cells, for SIR_0p or SIR_0+1p (nrt-VBR and rt-VBR only). Range: 1 - 10000 cells |
1.3.6.1.4.1.123.3.79.1.2.1.33 | nncCrPvccBwdTmCdv | 0 | 0 | This value is to set the cell delay variation (CDV) between two PVC endpoints when using the rt-VBR service category. Range: 250-… |
1.3.6.1.4.1.123.3.79.1.2.1.34 | nncCrPvccBwdTmClr | 0 | 0 | The object is to set the cell loss ratio (CLR) between two PVC endpoints when using the nrt-VBR service category. Value set as 1.… |
1.3.6.1.4.1.123.3.79.1.2.1.35 | nncCrPvccBwdTmFrameDiscard | 0 | 0 | The Frame (AAL protocol data unit) Discard option. When enabled, cells are discarded at the frame level by examining the SDU-ty… |
1.3.6.1.4.1.123.3.79.1.2.1.36 | nncCrPvccSrcAlsConfig | 0 | 0 | This object is used to set OAM Alarm Surveillance configuration for the source endpoint. |
1.3.6.1.4.1.123.3.79.1.2.1.37 | nncCrPvccDstAlsConfig | 0 | 0 | This object is used to set OAM Alarm Surveillance configuration for the destination endpoint. |
1.3.6.1.4.1.123.3.79.1.2.1.38 | nncCrPvccCreator | 0 | 0 | The object retrieves the creator of a PVC connection. |