This object is used to set the traffic service category
from source endpoint to destination endpoint.
This object is dependent on the value specified in
nncCrPvccFwdTmTrafficDescripton object
Parsed from file NncExtPVC.mib.txt
Company: None
Module: NNCEXTPVC-MIB
This object is used to set the traffic service category
from source endpoint to destination endpoint.
This object is dependent on the value specified in
nncCrPvccFwdTmTrafficDescripton object
Parsed from file NNCEXTPVC-MIB.mib
Module: NNCEXTPVC-MIB
Vendor: Newbridge Networks Corporation
Module: NNCEXTPVC-MIB
[Automatically extracted from oidview.com]
nncCrPvccFwdServiceCategory OBJECT-TYPE SYNTAX INTEGER { cbr(1), nrtvbr(2), abr(3), ubr(4), rtvbr(6) } MAX-ACCESS read-create STATUS current DESCRIPTION "This object is used to set the traffic service category from source endpoint to destination endpoint. This object is dependent on the value specified in nncCrPvccFwdTmTrafficDescripton object " DEFVAL { nrtvbr } ::= { nncCrPvccTableEntry 8 }
nncCrPvccFwdServiceCategory OBJECT-TYPE SYNTAX INTEGER { cbr(1), nrtvbr(2), abr(3), ubr(4), rtvbr(6) } MAX-ACCESS read-create STATUS current DESCRIPTION "This object is used to set the traffic service category from source endpoint to destination endpoint. This object is dependent on the value specified in nncCrPvccFwdTmTrafficDescripton object " DEFVAL { nrtvbr } ::= { nncCrPvccTableEntry 8 }
| OID | Name | Sub children | Sub Nodes Total | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.123.3.79.1.2.1.1 | nncCrPvccSrcIfIndex | 0 | 0 | This object contains the ifIndex value for the source endpoint. |
| 1.3.6.1.4.1.123.3.79.1.2.1.2 | nncCrPvccSrcVpi | 0 | 0 | This object contains the VPI value for the source endpoint. |
| 1.3.6.1.4.1.123.3.79.1.2.1.3 | nncCrPvccSrcVci | 0 | 0 | This object contains the VCI value for the source endpoint. |
| 1.3.6.1.4.1.123.3.79.1.2.1.4 | nncCrPvccDstIfIndex | 0 | 0 | This object contains the ifIndex value for the destination endpoint. |
| 1.3.6.1.4.1.123.3.79.1.2.1.5 | nncCrPvccDstVpi | 0 | 0 | This object contains the VPI value for the destination endpoint. |
| 1.3.6.1.4.1.123.3.79.1.2.1.6 | nncCrPvccDstVci | 0 | 0 | This object contains the VCI value for the destination endpoint. |
| 1.3.6.1.4.1.123.3.79.1.2.1.7 | nncCrPvccCastType | 0 | 0 | This object is used to indicate whether the PVCC is point-to-point or point-to-multipoint |
| 1.3.6.1.4.1.123.3.79.1.2.1.9 | nncCrPvccBwdServiceCategory | 0 | 0 | This object is used to set the traffic service category from destination end point to source endpoint. This object is dependent o… |
| 1.3.6.1.4.1.123.3.79.1.2.1.10 | nncCrPvccFwdAbrDynTrfcIcr | 0 | 0 | ABR dynamic traffic descriptor's Initial Cell Rate for the forward direction. Range: 0 - 2488320 Kb/s |
| 1.3.6.1.4.1.123.3.79.1.2.1.11 | nncCrPvccFwdAbrDynTrfcRif | 0 | 0 | ABR traffic Rate Increase Factor for the forward direction. Value is expressed as the -power of 2. Range: 0 - 9 |
| 1.3.6.1.4.1.123.3.79.1.2.1.12 | nncCrPvccFwdAbrDynTrfcRdf | 0 | 0 | ABR traffic Rate Decrease Factor descriptor for the forward direction. Value is expressed as the -power of 2 Range: 0 - 9 |
| 1.3.6.1.4.1.123.3.79.1.2.1.13 | nncCrPvccBwdAbrDynTrfcIcr | 0 | 0 | ABR dynamic traffic descriptor's Initial Cell Rate for the destination endpoint. Range: 0 - 2488320 Kb/s |
| 1.3.6.1.4.1.123.3.79.1.2.1.14 | nncCrPvccBwdAbrDynTrfcRif | 0 | 0 | ABR traffic Rate Increase Factor for the destination endpoint. Value is expressed as the -power of 2. Range: 0 - 9 |
| 1.3.6.1.4.1.123.3.79.1.2.1.15 | nncCrPvccBwdAbrDynTrfcRdf | 0 | 0 | ABR traffic Rate Decrease Factor descriptor for the destination endpoint. Value is expressed as the -power of 2 Range: 0 - 9 |
| 1.3.6.1.4.1.123.3.79.1.2.1.16 | nncCrPvccSrcBillingFlag | 0 | 0 | Billing Configuration for the source endpoint. |
| 1.3.6.1.4.1.123.3.79.1.2.1.17 | nncCrPvccDstBillingFlag | 0 | 0 | Billing Configuration for the destination endpoint. |
| 1.3.6.1.4.1.123.3.79.1.2.1.18 | nncCrPvccFwdTmTrafficDescriptor | 0 | 0 | This object contains the traffic descriptor for the PVC. None (0) (Not applicable,the case of a P2MP leaf) Tag All … |
| 1.3.6.1.4.1.123.3.79.1.2.1.19 | nncCrPvccFwdTmPolicingOption | 0 | 0 | Policing Option for a PVcC. The tag option is supported only on rt-VBR/nrt-VBR connections that use the P_0_1/S_0 traffic descrip… |
| 1.3.6.1.4.1.123.3.79.1.2.1.20 | nncCrPvccFwdTmBucketOneRate | 0 | 0 | This object is used for peak cell rate (PCR), the cell rate which the source may never exceed. It is used to determine which cel… |
| 1.3.6.1.4.1.123.3.79.1.2.1.21 | nncCrPvccFwdTmBucketOneCdvt | 0 | 0 | This object is used to set cell delay variation tolerance (CDVT) for one end point, measured in microseconds. Range: 1 - 190,000 … |
| 1.3.6.1.4.1.123.3.79.1.2.1.22 | nncCrPvccFwdTmBucketTwoRate | 0 | 0 | SIR_0p, SIR_0+1p or MIR_0+1p. This parameter holds the sustained information rate for for VBR traffic, and the minimum informati… |
| 1.3.6.1.4.1.123.3.79.1.2.1.23 | nncCrPvccFwdTmBucketTwoMbs | 0 | 0 | This object is for the maximum burst size, in cells, for SIR_0p or SIR_0+1p (nrt-VBR and rt-VBR only). Range: 1 - 10000 cells |
| 1.3.6.1.4.1.123.3.79.1.2.1.24 | nncCrPvccFwdTmCdv | 0 | 0 | This value is to set the cell delay variation (CDV) between two PVC endpoints when using the rt-VBR service category. Range: 250-… |
| 1.3.6.1.4.1.123.3.79.1.2.1.25 | nncCrPvccFwdTmClr | 0 | 0 | The object is to set the cell loss ratio (CLR) between two PVC endpoints when using the nrt-VBR service category. Value set as 1.… |
| 1.3.6.1.4.1.123.3.79.1.2.1.26 | nncCrPvccFwdTmFrameDiscard | 0 | 0 | The Frame (AAL protocol data unit) Discard option. When enabled, cells are discarded at the frame level by examining the SDU-ty… |
| 1.3.6.1.4.1.123.3.79.1.2.1.27 | nncCrPvccBwdTmTrafficDescriptor | 0 | 0 | This object contains the traffic descriptor for the SPVC. None (0) (Not applicable,the case of a P2MP leaf) Tag All … |
| 1.3.6.1.4.1.123.3.79.1.2.1.28 | nncCrPvccBwdTmPolicingOption | 0 | 0 | Policing Option for an PVCC. The tag option is supported only on rt-VBR/nrt-VBR connections that use the P_0_1/S_0 traffic descri… |
| 1.3.6.1.4.1.123.3.79.1.2.1.29 | nncCrPvccBwdTmBucketOneRate | 0 | 0 | This object is used for peak cell rate (PCR), the cell rate which the source may never exceed. It is used to determine which cel… |
| 1.3.6.1.4.1.123.3.79.1.2.1.30 | nncCrPvccBwdTmBucketOneCdvt | 0 | 0 | This object is used to set cell delay variation tolerance (CDVT) for one end point, measured in microseconds. Range: 1 - 190,000 … |
| 1.3.6.1.4.1.123.3.79.1.2.1.31 | nncCrPvccBwdTmBucketTwoRate | 0 | 0 | SIR_0p, SIR_0+1p or MIR_0+1p. This parameter holds the sustained information rate for for VBR traffic, and the minimum informati… |
| 1.3.6.1.4.1.123.3.79.1.2.1.32 | nncCrPvccBwdTmBucketTwoMbs | 0 | 0 | This object is for the maximum burst size, in cells, for SIR_0p or SIR_0+1p (nrt-VBR and rt-VBR only). Range: 1 - 10000 cells |
| 1.3.6.1.4.1.123.3.79.1.2.1.33 | nncCrPvccBwdTmCdv | 0 | 0 | This value is to set the cell delay variation (CDV) between two PVC endpoints when using the rt-VBR service category. Range: 250-… |
| 1.3.6.1.4.1.123.3.79.1.2.1.34 | nncCrPvccBwdTmClr | 0 | 0 | The object is to set the cell loss ratio (CLR) between two PVC endpoints when using the nrt-VBR service category. Value set as 1.… |
| 1.3.6.1.4.1.123.3.79.1.2.1.35 | nncCrPvccBwdTmFrameDiscard | 0 | 0 | The Frame (AAL protocol data unit) Discard option. When enabled, cells are discarded at the frame level by examining the SDU-ty… |
| 1.3.6.1.4.1.123.3.79.1.2.1.36 | nncCrPvccSrcAlsConfig | 0 | 0 | This object is used to set OAM Alarm Surveillance configuration for the source endpoint. |
| 1.3.6.1.4.1.123.3.79.1.2.1.37 | nncCrPvccDstAlsConfig | 0 | 0 | This object is used to set OAM Alarm Surveillance configuration for the destination endpoint. |
| 1.3.6.1.4.1.123.3.79.1.2.1.38 | nncCrPvccCreator | 0 | 0 | The object retrieves the creator of a PVC connection. |
| 1.3.6.1.4.1.123.3.79.1.2.1.39 | nncCrPvccRowStatus | 0 | 0 | This object is to control a row creation of a CR PVCC. When RowStatus is createAndWait, information for a row is cached in memor… |