An entry of nncCrSpvpcTable
Parsed from file NncExtSPVC.mib.txt
Company: None
Module: NNCEXTSPVC-MIB
An entry of nncCrSpvpcTable
Parsed from file NNCEXTSPVC-MIB.mib
Module: NNCEXTSPVC-MIB
Vendor: Newbridge Networks Corporation
Module: NNCEXTSPVC-MIB
[Automatically extracted from oidview.com]
nncCrSpvpcTableEntry OBJECT-TYPE SYNTAX NncCrSpvpcTableEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An entry of nncCrSpvpcTable" INDEX {ifIndex, atmVplVpi} ::= { nncCrSpvpcTable 1 }
nncCrSpvpcTableEntry OBJECT-TYPE SYNTAX NncCrSpvpcTableEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An entry of nncCrSpvpcTable" INDEX {ifIndex, atmVplVpi} ::= { nncCrSpvpcTable 1 }
OID | Name | Sub children | Sub Nodes Total | Description |
---|---|---|---|---|
1.3.6.1.4.1.123.3.82.1.1.1.1 | nncCrSpvpcServiceCategory | 0 | 0 | This object is used to set the traffic service category. This object is dependent on the value specified in nncCrSpvpcTrafficDe… |
1.3.6.1.4.1.123.3.82.1.1.1.2 | nncCrSpvpcTargEpAddr | 0 | 0 | This object is used to specify the 20 byte AESA address for the target endpoint. The address map is as the following: Byte\Bit … |
1.3.6.1.4.1.123.3.82.1.1.1.3 | nncCrSpvpcTargVpi | 0 | 0 | This object contains the virtual path identifier (VPI) value for the target endpoint. Range: 0 - 4095 |
1.3.6.1.4.1.123.3.82.1.1.1.4 | nncCrSpvpcAdminStatus | 0 | 0 | This object accepts two values, enabled (1), and disabled (2). When the value is disabled, the SPVC is not connected. When enabl… |
1.3.6.1.4.1.123.3.82.1.1.1.5 | nncCrSpvpcPriority | 0 | 0 | This object is used to set the priority for a SPVC connection request. It ranges between 1-16, with the following values: Best Pr… |
1.3.6.1.4.1.123.3.82.1.1.1.6 | nncCrSpvpcMaxAdminWeight | 0 | 0 | This object is used to set a cost threshold for an SPVC connection. If the total cost of all VPCs exceeds this weight value for … |
1.3.6.1.4.1.123.3.82.1.1.1.7 | nncCrSpvpcOperation | 0 | 0 | This object is used to request a reroute operation. Querying this object will not provide any useful information. |
1.3.6.1.4.1.123.3.82.1.1.1.8 | nncCrSpvpcCallStatus | 0 | 0 | This read-only object is used to query the state of a particular SPVC. SPVCs that are connected and operational will return a va… |
1.3.6.1.4.1.123.3.82.1.1.1.9 | nncCrSpvpcLocRerouteConfig | 0 | 0 | This object is used to configure the 'reroute on loss of continuity' feature using OAM-CC cells. It can be configured for eithe… |
1.3.6.1.4.1.123.3.82.1.1.1.10 | nncCrSpvpcFwdAbrDynTrfcIcr | 0 | 0 | ABR dynamic traffic descriptor's Initial Cell (Information) Rate for the forward direction. Range: 0 - 2488320 Kb/s |
1.3.6.1.4.1.123.3.82.1.1.1.11 | nncCrSpvpcFwdAbrDynTrfcRif | 0 | 0 | ABR traffic Rate Increase Factor for the forward direction. Value is expressed as the -power of 2. Range: 0 - 9 |
1.3.6.1.4.1.123.3.82.1.1.1.12 | nncCrSpvpcFwdAbrDynTrfcRdf | 0 | 0 | ABR traffic Rate Decrease Factor descriptor for the forward direction. Value is expressed as the -power of 2 Range: 0 - 9 |
1.3.6.1.4.1.123.3.82.1.1.1.13 | nncCrSpvpcBwdAbrDynTrfcIcr | 0 | 0 | ABR dynamic traffic descriptor's Initial Cell Rate for the destination endpoint. Range: 0 - 2488320 Kb/s |
1.3.6.1.4.1.123.3.82.1.1.1.14 | nncCrSpvpcBwdAbrDynTrfcRif | 0 | 0 | ABR traffic Rate Increase Factor for the backward direction. Value is expressed as the -power of 2. Range: 0 - 9 |
1.3.6.1.4.1.123.3.82.1.1.1.15 | nncCrSpvpcBwdAbrDynTrfcRdf | 0 | 0 | ABR traffic Rate Decrease Factor descriptor for the backward direction. Value is expressed as the -power of 2 Range: 0 - 9 |
1.3.6.1.4.1.123.3.82.1.1.1.16 | nncCrSpvpcSrcBillingFlag | 0 | 0 | Billing Configuration for the source endpoint |
1.3.6.1.4.1.123.3.82.1.1.1.17 | nncCrSpvpcFwdTmTrafficDescriptor | 0 | 0 | This object contains the traffic descriptor for the SPVC. Tag All (1) (UBR using 2k/12k fabric only) P_0+1 (2) (C… |
1.3.6.1.4.1.123.3.82.1.1.1.18 | nncCrSpvpcFwdTmPolicingOption | 0 | 0 | Policing Option for an SPVPC. tag is supported only on rt-VBR/nrt-VBR connections that use the P_0+1/S_0 traffic descriptor |
1.3.6.1.4.1.123.3.82.1.1.1.19 | nncCrSpvpcFwdTmBucketOneRate | 0 | 0 | This object is for peak cell rate (PCR), the cell rate which the source may never exceed. It is used to determine which cells ar… |
1.3.6.1.4.1.123.3.82.1.1.1.20 | nncCrSpvpcFwdTmBucketOneCdvt | 0 | 0 | This object is used to set cell delay variation tolerance (CDVT) for one endpoint, measured in microseconds. Range: 1 - 190,000 m… |
1.3.6.1.4.1.123.3.82.1.1.1.21 | nncCrSpvpcFwdTmBucketTwoRate | 0 | 0 | SIR_0p, SIR_0+1p or MIR_0+1p. This parameter holds the sustained information rate for VBR traffic, and the minimum information r… |
1.3.6.1.4.1.123.3.82.1.1.1.22 | nncCrSpvpcFwdTmBucketTwoMbs | 0 | 0 | This object is for the maximum burst size, in cells, for SIR_0p or SIR_0+1p (nrtVbr and rtVbr only). Range: 1 - 10000 cells |
1.3.6.1.4.1.123.3.82.1.1.1.23 | nncCrSpvpcFwdTmCdv | 0 | 0 | This value is to set the cell delay variation (CDV) between two endpoints to support the rt-VBR service category. Range: 250-1000… |
1.3.6.1.4.1.123.3.82.1.1.1.24 | nncCrSpvpcFwdTmClr | 0 | 0 | The object is to set the cell loss ratio (CLR) between two SPVC endpoints when using the nrt-VBR service category. Value set as 1… |
1.3.6.1.4.1.123.3.82.1.1.1.25 | nncCrSpvpcBwdTmTrafficDescriptor | 0 | 0 | This object contains the traffic descriptor for the SPVC. Tag All (1) (UBR using 2k/12k fabric only) P_0+1 (2) (C… |
1.3.6.1.4.1.123.3.82.1.1.1.26 | nncCrSpvpcBwdTmPolicingOption | 0 | 0 | Policing Option for an SPVPC. tag is supported only on rt-VBR/nrt-VBR connections that use the P_0+1/S_0 traffic descriptor |
1.3.6.1.4.1.123.3.82.1.1.1.27 | nncCrSpvpcBwdTmBucketOneRate | 0 | 0 | This object is for peak information rate (PIR), the cell rate which the source may never exceed. It is used to determine which c… |
1.3.6.1.4.1.123.3.82.1.1.1.28 | nncCrSpvpcBwdTmBucketOneCdvt | 0 | 0 | This object is used to set cell delay variation tolerance (CDVT) for one endpoint, measured in microseconds. Range: 1 - 190,000 m… |
1.3.6.1.4.1.123.3.82.1.1.1.29 | nncCrSpvpcBwdTmBucketTwoRate | 0 | 0 | SIR_0p, SIR_0+1p or MIR_0+1p. This parameter holds the sustained information rate for VBR traffic, and the minimum information r… |
1.3.6.1.4.1.123.3.82.1.1.1.30 | nncCrSpvpcBwdTmBucketTwoMbs | 0 | 0 | This object is for the maximum burst size, in cells, for SIR_0p or SIR_0+1p (nrtVbr and rtVbr only). Range: 1 - 10000 cells |
1.3.6.1.4.1.123.3.82.1.1.1.31 | nncCrSpvpcBwdTmCdv | 0 | 0 | This value is to set the cell delay variation (CDV) between two endpoints to support the rt-VBR service category. Range: 250-1000… |
1.3.6.1.4.1.123.3.82.1.1.1.32 | nncCrSpvpcBwdTmClr | 0 | 0 | The object is to set the cell loss ratio (CLR) between two SPVC endpoints when using the nrt-VBR service category. Value set as 1… |
1.3.6.1.4.1.123.3.82.1.1.1.33 | nncCrSpvpcCreator | 0 | 0 | The object retrieves the creator of a SPVC connection. |
1.3.6.1.4.1.123.3.82.1.1.1.34 | nncCrSpvpcRowStatus | 0 | 0 | This object is used to control the status of a PDU and to query the status of an SPVC. When the RowStatus value is 'createAndWa… |