This field specifies the prefix for the iSCSI target names.
The default is iqn.2001-04.com.equallogic. This can be overriden on a per volume basis.
However the name must conform to the iSCSI Specification.
Parsed from file eqlgroup.mib.txt
Company: equallogic
Module: EQLGROUP-MIB
Vendor: EqualLogic
Module: EQLGROUP-MIB (eqlgroup.mib)
Type: TABULAR
Access: read-write
Syntax: DisplayString
( SIZE (
1..64 ) )
Automatically extracted from www.mibdepot.com
eqlGroupIscsiNamePrefix OBJECT-TYPE SYNTAX DisplayString(SIZE(1..64)) MAX-ACCESS read-write STATUS current DESCRIPTION "This field specifies the prefix for the iSCSI target names. The default is iqn.2001-04.com.equallogic. This can be overriden on a per volume basis. However the name must conform to the iSCSI Specification." DEFVAL { "iqn.2001-04.com.equallogic." } ::= { eqlStorageGroupEntry 16 }
OID | Name | Sub children | Sub Nodes Total | Description |
---|---|---|---|---|
1.3.6.1.4.1.12740.1.1.1.1.1 | eqlGroupId | 0 | 0 | This index uniquely identifies the group. This index should always be 1. |
1.3.6.1.4.1.12740.1.1.1.1.2 | eqlGroupIsSingleSubnet | 0 | 0 | This field is used to indicate whether or not all the arrays within a group are located in the same subset. The default is singl… |
1.3.6.1.4.1.12740.1.1.1.1.3 | eqlGroupDefaultGatewayIpAddress | 0 | 0 | This field is used to indicate the default gatewayfor the group. This value can be overriden on a per array basis. This field con… |
1.3.6.1.4.1.12740.1.1.1.1.4 | eqlGroupDefaultMask | 0 | 0 | This field is used to indicate the default netmaskfor the group. This value can be overriden on a per array basis. This field ide… |
1.3.6.1.4.1.12740.1.1.1.1.5 | eqlGroupDefaultRoutingProtocol | 0 | 0 | This field is used to indicate the routing protocol use when a group spans multiple subnets. The support protocols are RIP and O… |
1.3.6.1.4.1.12740.1.1.1.1.6 | eqlGroupIsStorageOptimization | 0 | 0 | This field is used to indicate whether the Storage Pool is optimized for capacity (RAID 5/50) or performance (RAID 10). The defa… |
1.3.6.1.4.1.12740.1.1.1.1.7 | eqlGroupDiskAddWaitTime | 0 | 0 | This field is used to indicated how long to wait in minutes before including newly inserted drives into the RAID set. The delay … |
1.3.6.1.4.1.12740.1.1.1.1.8 | eqlGroupDefaultLanguage | 0 | 0 | This field is used to define the Locale the group will be running in. The default is ISO Latin 1. Need to create the enumerated … |
1.3.6.1.4.1.12740.1.1.1.1.9 | eqlGroupDefaultSnapshotSize | 0 | 0 | This field is used to specify by default what percentage of a volume is reserved for SnapShots. The default is 100%. It can be o… |
1.3.6.1.4.1.12740.1.1.1.1.10 | eqlGroupDefaultSnapshotWarningLevel | 0 | 0 | This field is used to specify by default when the administrator is warned that the space used for SnapShots close to being exhau… |
1.3.6.1.4.1.12740.1.1.1.1.11 | eqlGroupDefaultSnapshotDeletePolicy | 0 | 0 | This field specifies what should happen when the space reserved for SnapShots is exhuasted. The default is delete-oldest SnapSho… |
1.3.6.1.4.1.12740.1.1.1.1.13 | eqlGroupTimeZone | 0 | 0 | The field specifies the default timezone for the group HST (GMT-10:00) Hawaiian Standard Time: US/Hawaii, AST (GMT-09:00) Alaskan… |
1.3.6.1.4.1.12740.1.1.1.1.14 | eqlGroupLogLevel | 0 | 0 | This field specifies the loglevel for the group. The following levels are supported. The value of this object will be an OR of th… |
1.3.6.1.4.1.12740.1.1.1.1.15 | eqlGroupDescription | 0 | 0 | This field contains a use supplied description for the group. There is no default. |
1.3.6.1.4.1.12740.1.1.1.1.17 | eqlGroupDefaultAliasToVolumeName | 0 | 0 | This field specifies whether or not to default the iSCSI alias to the name of the volume. This can be overriden on a per volume … |
1.3.6.1.4.1.12740.1.1.1.1.18 | eqlGroupEmailSrcDomain | 0 | 0 | This field specifies the SNMP domain name used in the FROM email address in generated email. e.g., everything after @ in foo@equ… |
1.3.6.1.4.1.12740.1.1.1.1.19 | eqlGroupName | 0 | 0 | This field specifies the Well Known Name for the group. It must be a name which is resolvable by DNS. There is no default for Gr… |
1.3.6.1.4.1.12740.1.1.1.1.20 | eqlGroupIpAddr | 0 | 0 | This field specifies the Well Known Address for the group. This is the IP address iSCSI Initiators will used to connect to the g… |
1.3.6.1.4.1.12740.1.1.1.1.21 | eqlGroupEnableWebAccessSSL | 0 | 0 | This field specifies whether or not allow web access to the group using https. The default is TRUE. |
1.3.6.1.4.1.12740.1.1.1.1.22 | eqlGroupEnableWebAccessUnsecure | 0 | 0 | This field specifies whether or not allow web access to the group using http. The default is TRUE. |
1.3.6.1.4.1.12740.1.1.1.1.23 | eqlGroupEnableCliAccessSSH | 0 | 0 | This field specifies whether or not allow ssh access to the group. The default is TRUE. |
1.3.6.1.4.1.12740.1.1.1.1.24 | eqlGroupEnableCliAccessUnsecure | 0 | 0 | This field specifies whether or not allow telnet access to the group. The default is FALSE. |
1.3.6.1.4.1.12740.1.1.1.1.25 | eqlGroupEnableEmailNotifications | 0 | 0 | This field is used to specify whether to notify administrators on alarms via email. The default is FALSE. |
1.3.6.1.4.1.12740.1.1.1.1.26 | eqlGroupEnableSNMPTraps | 0 | 0 | This field is used to specify whether to notify administrators on alarms via SNMP TRAPS. The default is FALSE. |
1.3.6.1.4.1.12740.1.1.1.1.27 | eqlGroupEnableSyslog | 0 | 0 | This field is used to specify whether to notify administrators on alarms via syslog. The default is FALSE. |
1.3.6.1.4.1.12740.1.1.1.1.28 | eqlGroupEmailPriorityMask | 0 | 0 | This field is used to configure the type of events to be sent in email notifications. The following type of events are supported… |
1.3.6.1.4.1.12740.1.1.1.1.29 | eqlGroupSNMPPriorityMask | 0 | 0 | This field is currently not being used. |
1.3.6.1.4.1.12740.1.1.1.1.30 | eqlGroupSysLogPriorityMask | 0 | 0 | This field is used to configure the type of events to be sent in syslog notifications. The following type of events are supporte… |
1.3.6.1.4.1.12740.1.1.1.1.31 | eqlGroupDefaultSite | 0 | 0 | This field specifies the site where the volume resides. Sites are defined on a per array basis. Sites are used to define where pr… |
1.3.6.1.4.1.12740.1.1.1.1.32 | eqlGroupPasswd1 | 0 | 0 | An octet string containing the password to authenticate members joining the group. If written, it changes the password for the acc… |
1.3.6.1.4.1.12740.1.1.1.1.33 | eqlGroupPasswd2 | 0 | 0 | Shouldn't be documented. or even here?JPMFIX |
1.3.6.1.4.1.12740.1.1.1.1.34 | eqlGroupRowStatus | 0 | 0 | Rowstatus |
1.3.6.1.4.1.12740.1.1.1.1.35 | eqlGroupObjectReuseScrub | 0 | 0 | If enabled, an object is zeroed out before reuse so that the new entity using the object will not be aware of the old contents … |
1.3.6.1.4.1.12740.1.1.1.1.36 | eqlGroupEnableSSH | 0 | 0 | This field specifies whether or not allow SSH access to the group. The default is TRUE. |
1.3.6.1.4.1.12740.1.1.1.1.37 | eqlGroupEnableTelnet | 0 | 0 | This field specifies whether or not allow telnet access to the group. The default is TRUE. |
1.3.6.1.4.1.12740.1.1.1.1.38 | eqlGroupEnableFTP | 0 | 0 | This field specifies whether or not allow ftp access to the group. The default is TRUE. |
1.3.6.1.4.1.12740.1.1.1.1.39 | eqlGroupEmailSrcUserName | 0 | 0 | This field specifies user portion of the FROM email address used in generated email. e.g., everything before @ in foo@equallogic… |
1.3.6.1.4.1.12740.1.1.1.1.40 | eqlGroupSyslogFacility | 0 | 0 | This field specifies the facility code which you would like applied to all eqllog messages that are targeted at syslog. |
1.3.6.1.4.1.12740.1.1.1.1.41 | eqlGroupEnableCLB | 0 | 0 | This field specifies whether or not turn on Connection Loand balancer. The default is TRUE. |
1.3.6.1.4.1.12740.1.1.1.1.42 | eqlGroupEnableVolBal | 0 | 0 | This field specifies whether or not turn on volume balancing. The default is TRUE. |
1.3.6.1.4.1.12740.1.1.1.1.43 | eqlGroupDiscoveryFilter | 0 | 0 | If set to true, the list of volumes returned during discovery is filtered based on chap configuration in volume ACLs. The default… |
1.3.6.1.4.1.12740.1.1.1.1.44 | eqlGroupEmailSupportContact | 0 | 0 | This field specifies the customer email address for support to contact in the event of a system failure. Configuring this field … |
1.3.6.1.4.1.12740.1.1.1.1.45 | eqlGroupReplicationWindowSize | 0 | 0 | This field specifies the receiving window size of the tcp connection established to secondary site during replication data trans… |
1.3.6.1.4.1.12740.1.1.1.1.46 | eqlGroupConfigurationFlags | 0 | 0 | This field defines the common place holder for group wide configuration flag. The flags must be of type enable(1) or disable(0).… |
1.3.6.1.4.1.12740.1.1.1.1.47 | eqlGroupISCSIPortalGrpTag | 0 | 0 | A flag used internally by the iSCSI subsystem to determine the upgrade history of this storage group and infer the default iSCSI… |
1.3.6.1.4.1.12740.1.1.1.1.48 | eqlGroupMaxConcurrentReplicas | 0 | 0 | This field specifies the maximum number of replications that are transferring data at one time. The minimum value is 1, the max… |
1.3.6.1.4.1.12740.1.1.1.1.49 | eqlGroupDefaultThinWarn | 0 | 0 | The default eqliscsiVolumeThinWarnPercentage value used when creating thin provisoned volumes. |
1.3.6.1.4.1.12740.1.1.1.1.50 | eqlGroupDefaultThinMaxGrow | 0 | 0 | The default eqliscsiVolumeThinMaxGrowPercentage value used when creating thin provisoned volumes. |
1.3.6.1.4.1.12740.1.1.1.1.51 | eqlGroupDefaultMgmtGatewayIpAddressType | 0 | 0 | eqlGroupDefaultMgmtGatewayIpAddressType OBJECT-TYPE SYNTAX InetAddressType MAX-ACCESS read-write STATUS current DESCRIPTION "Th… |
1.3.6.1.4.1.12740.1.1.1.1.52 | eqlGroupDefaultMgmtGatewayIpAddress | 0 | 0 | eqlGroupDefaultMgmtGatewayIpAddress OBJECT-TYPE SYNTAX InetAddress MAX-ACCESS read-write STATUS current DESCRIPTION "This field… |
1.3.6.1.4.1.12740.1.1.1.1.53 | eqlGroupInet6AddrType | 0 | 0 | eqlGroupInet6AddrType OBJECT-TYPE SYNTAX InetAddressType MAX-ACCESS read-write STATUS current DESCRIPTION "This field specifies… |
1.3.6.1.4.1.12740.1.1.1.1.54 | eqlGroupInet6Addr | 0 | 0 | eqlGroupInet6Addr OBJECT-TYPE SYNTAX InetAddress MAX-ACCESS read-write STATUS current DESCRIPTION "This field specifies the IPv… |
1.3.6.1.4.1.12740.1.1.1.1.55 | eqlGroupInetAddrType | 0 | 0 | eqlGroupInetAddrType OBJECT-TYPE SYNTAX InetAddressType MAX-ACCESS read-write STATUS current DESCRIPTION "This field specifies … |
1.3.6.1.4.1.12740.1.1.1.1.56 | eqlGroupInetAddr | 0 | 0 | eqlGroupInetAddr OBJECT-TYPE SYNTAX InetAddress MAX-ACCESS read-write STATUS current DESCRIPTION "This field specifies the IPv4… |
1.3.6.1.4.1.12740.1.1.1.1.57 | eqlGroupSupportSlowSwitch | 0 | 0 | eqlGroupSupportSlowSwitch OBJECT-TYPE SYNTAX INTEGER { off (0), automatic (1), on (2) } MAX-ACCESS read-write STATUS current DE… |
1.3.6.1.4.1.12740.1.1.1.1.58 | eqlGroupProfileIndex | 0 | 0 | eqlGroupProfileIndex OBJECT-TYPE SYNTAX Unsigned32(1..4294967295) MAX-ACCESS read-only STATUS current DESCRIPTION "This field r… |
1.3.6.1.4.1.12740.1.1.1.1.59 | eqlGroupEnableSSHProtocolV1 | 0 | 0 | eqlGroupEnableSSHProtocolV1 OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "This field specifie… |
1.3.6.1.4.1.12740.1.1.1.1.60 | eqlGroupEnableStandbyButton | 0 | 0 | eqlGroupEnableStandbyButton OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "This field specifie… |
1.3.6.1.4.1.12740.1.1.1.1.61 | eqlGroupLDAPLoginAuthEnable | 0 | 0 | eqlGroupLDAPLoginAuthEnable OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "This field enables … |
1.3.6.1.4.1.12740.1.1.1.1.62 | eqlGroupApplianceDiscovery | 0 | 0 | eqlGroupApplianceDiscovery OBJECT-TYPE SYNTAX INTEGER { discover (0) } MAX-ACCESS read-write STATUS current DESCRIPTION "" DEFV… |
1.3.6.1.4.1.12740.1.1.1.1.63 | eqlGroupDefaultDcbVlanId | 0 | 0 | eqlGroupDefaultDcbVlanId OBJECT-TYPE SYNTAX Unsigned32(0..4095) MAX-ACCESS read-write STATUS current DESCRIPTION "Default VLAN … |
1.3.6.1.4.1.12740.1.1.1.1.64 | eqlGroupThermalShutdownOverride | 0 | 0 | eqlGroupThermalShutdownOverride OBJECT-TYPE SYNTAX INTEGER { disabled (0), enabled (1) } MAX-ACCESS read-write STATUS current D… |
1.3.6.1.4.1.12740.1.1.1.1.65 | eqlGroupEnableLegacyCryptos | 0 | 0 | eqlGroupEnableLegacyCryptos OBJECT-TYPE SYNTAX INTEGER { enabled (0), disabled (1) } MAX-ACCESS read-write STATUS current DESCR… |
1.3.6.1.4.1.12740.1.1.1.1.66 | eqlGroupMaxReplSegments | 0 | 0 | eqlGroupMaxReplSegments OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "This field specifies the… |
1.3.6.1.4.1.12740.1.1.1.1.67 | eqlGroupEnableVolumeRecovery | 0 | 0 | eqlGroupEnableVolumeRecovery OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "This field specifi… |
1.3.6.1.4.1.12740.1.1.1.1.68 | eqlGroupSessionIdleTimeout | 0 | 0 | eqlGroupSessionIdleTimeout OBJECT-TYPE SYNTAX Integer32(1..1440) UNITS "minutes" MAX-ACCESS read-write STATUS current DESCRIPTI… |
1.3.6.1.4.1.12740.1.1.1.1.69 | eqlGroupSessionIdleTimeoutEnable | 0 | 0 | eqlGroupSessionIdleTimeoutEnable OBJECT-TYPE SYNTAX INTEGER { disabled (0), enabled (1) } MAX-ACCESS read-write STATUS current … |
1.3.6.1.4.1.12740.1.1.1.1.70 | eqlGroupSessionBannerEnable | 0 | 0 | eqlGroupSessionBannerEnable OBJECT-TYPE SYNTAX INTEGER { disabled (0), enabled (1) } MAX-ACCESS read-write STATUS current DESCR… |
1.3.6.1.4.1.12740.1.1.1.1.71 | eqlGroupDefaultVolSnapshotBorrowEnabled | 0 | 0 | eqlGroupDefaultVolSnapshotBorrowEnabled OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "This fi… |
1.3.6.1.4.1.12740.1.1.1.1.72 | eqlGroupRecoveryLifeTimeEnable | 0 | 0 | eqlGroupRecoveryLifeTimeEnable OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "This field enabl… |
1.3.6.1.4.1.12740.1.1.1.1.73 | eqlGroupRecoveryLifeTime | 0 | 0 | eqlGroupRecoveryLifeTime OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "This field defines the … |
1.3.6.1.4.1.12740.1.1.1.1.74 | eqlGroupTimeProtocol | 0 | 0 | eqlGroupTimeProtocol OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-write STATUS current DESCRIPTION "This field specifies the acti… |
1.3.6.1.4.1.12740.1.1.1.1.75 | eqlGroupRecoveryTrimmerFreq | 0 | 0 | eqlGroupRecoveryTrimmerFreq OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "This field defines t… |
1.3.6.1.4.1.12740.1.1.1.1.76 | eqlGroupUpdateEnable | 0 | 0 | eqlGroupUpdateEnable OBJECT-TYPE SYNTAX INTEGER { enabled (0), disabled (1) } MAX-ACCESS read-write STATUS current DESCRIPTION … |
1.3.6.1.4.1.12740.1.1.1.1.77 | eqlGroupUpdateLast | 0 | 0 | eqlGroupUpdateLast OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-write STATUS current DESCRIPTION "The time of last update perf… |
1.3.6.1.4.1.12740.1.1.1.1.78 | eqlGroupDefaultSectorSize | 0 | 0 | eqlGroupDefaultSectorSize OBJECT-TYPE SYNTAX INTEGER { sector-size-512-bytes(0), sector-size-4096-bytes(1) } MAX-ACCESS read-cr… |
1.3.6.1.4.1.12740.1.1.1.1.80 | eqlGroupCompressionScanFreq | 0 | 0 | eqlGroupCompressionScanFreq OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "This index is the la… |
1.3.6.1.4.1.12740.1.1.1.1.81 | eqlGroupRunCompressionScan | 0 | 0 | eqlGroupRunCompressionScan OBJECT-TYPE SYNTAX INTEGER { enabled (0), disabled(1) } MAX-ACCESS read-write STATUS current DESCRIP… |
1.3.6.1.4.1.12740.1.1.1.1.82 | eqlGroupMonitorReminderTimestamp | 0 | 0 | eqlGroupMonitorReminderTimestamp OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-write STATUS current DESCRIPTION "UTC timestamp … |