Reference record for OID 1.3.6.1.4.1.15.2.5.69


parent
1.3.6.1.4.1.15.2.5 (annexconfig)
node code
69
node name
anxPasswdLimit
dot oid
1.3.6.1.4.1.15.2.5.69
type
OBJECT-TYPE
asn1 oid
  • {iso(1) identified-organization(3) dod(6) internet(1) private(4) enterprise(1) xylogics(15) annex(2) annexconfig(5) anxPasswdLimit(69)}
  • {iso(1) identified-organization(3) dod(6) internet(1) private(4) enterprises(1) xylogics(15) annex(2) annexconfig(5) anxPasswdLimit(69)}
  • {iso(1) org(3) dod(6) internet(1) private(4) enterprise(1) xylogics(15) annex(2) annexconfig(5) anxPasswdLimit(69)}
  • {iso(1) org(3) dod(6) internet(1) private(4) enterprises(1) xylogics(15) annex(2) annexconfig(5) anxPasswdLimit(69)}
  • {iso(1) iso-identified-organization(3) dod(6) internet(1) private(4) enterprise(1) xylogics(15) annex(2) annexconfig(5) anxPasswdLimit(69)}
  • {iso(1) iso-identified-organization(3) dod(6) internet(1) private(4) enterprises(1) xylogics(15) annex(2) annexconfig(5) anxPasswdLimit(69)}
  • iri oid
  • /iso/identified-organization/dod/internet/private/enterprise/xylogics/annex/annexconfig/anxPasswdLimit
  • /iso/identified-organization/dod/internet/private/enterprises/xylogics/annex/annexconfig/anxPasswdLimit
  • /iso/org/dod/internet/private/enterprise/xylogics/annex/annexconfig/anxPasswdLimit
  • /iso/org/dod/internet/private/enterprises/xylogics/annex/annexconfig/anxPasswdLimit
  • /iso/iso-identified-organization/dod/internet/private/enterprise/xylogics/annex/annexconfig/anxPasswdLimit
  • /iso/iso-identified-organization/dod/internet/private/enterprises/xylogics/annex/annexconfig/anxPasswdLimit
  • iri by oid_info
    /ISO/Identified-Organization/6/1/4/1/15/2/5/69

    Description by mibdepot

    Defines the maximum number of times a user
    on a port can attempt to enter a password
    before the Annex resets the port. Setting this
    object to 0 results in a default value of 3.

    This MIB object corresponds to the NA/admin
    Annex parameter 'passwd_limit'.

    Parsed from file xylo-anx.mib.txt
    Company: avaya
    Module: XYLO-ANNEX-MIB

    Information by oid_info

    Child arc 0 is used to translate between SNMPv1 and SNMPv2 notification parameters as explained in IETF RFC 2576, section 3.

    Information by mibdepot

    anxPasswdLimit OBJECT-TYPE SYNTAX INTEGER (0..10) ACCESS read-write STATUS mandatory DESCRIPTION "Defines the maximum number of times a user on a port can attempt to enter a password before the Annex resets the port. Setting this object to 0 results in a default value of 3. This MIB object corresponds to the NA/admin Annex parameter 'passwd_limit'." ::= { annexconfig 69 }

    First Registration Authority (recovered by parent 1.3.6.1.4.1.15)

    Barnes Jim

    Children (1)

    OIDNameSub childrenSub Nodes TotalDescription
    1.3.6.1.4.1.15.2.5.69.0 anxPasswdLimit 0 0 None

    Brothers (104)

    To many brothers! Only 100 nearest brothers are shown.

    OIDNameSub childrenSub Nodes TotalDescription
    ...
    1.3.6.1.4.1.15.2.5.19 anxRwhod 1 1 Defines whether the Annex listens for RWHO
    broadcasts when building its host table.
    1.3.6.1.4.1.15.2.5.20 anxMinUniqueHostNames 1 1 Defines whether the Annex minimum uniqueness
    feature is available.
    1.3.6.1.4.1.15.2.5.21 anxHostTableSize 1 1 Defines the number of entries in the Annex
    host table. 0 indicates no host table. 251
    sets no limit on the size of the table.
    1.3.6.1.4.1.15.2.5.22 anxRouted 1 1 Defines whether the RIP-listener of the routing
    daemon on the Annex is enabled.
    1.3.6.1.4.1.15.2.5.23 anxEnableSecurity 1 1 This parameter controls whether the Annex
    security system is enabled.
    1.3.6.1.4.1.15.2.5.24 anxPassword 1 1 Setting this parameter changes the Annex's
    administration password. Reading this parameter
    will return either if the password i…
    1.3.6.1.4.1.15.2.5.25 anxSecurServer1Addr 1 1 The Internet address of the primary host where
    the Annex sends its security requests.
    1.3.6.1.4.1.15.2.5.26 anxSecurServer2Addr 1 1 The Internet address of the secondary host
    where the Annex sends its security requests.
    1.3.6.1.4.1.15.2.5.27 anxNetTurnAround 1 1 The amount of time (in seconds) that the Annex
    waits for a response from a security server.
    1.3.6.1.4.1.15.2.5.28 anxSecurBcast 1 1 This parameter controls whether the Annex
    will broadcast its security requests when
    neither of the preferred security servers are…
    1.3.6.1.4.1.15.2.5.29 anxVcliSecurity 1 1 This parameter controls whether the Annex
    performs user validation on the virtual CLI
    connections.
    1.3.6.1.4.1.15.2.5.30 anxVcliPassword 1 1 This parameter defines a password used by the
    Annex when setting up a virtual CLI connection.
    1.3.6.1.4.1.15.2.5.31 anxAcpKey 1 1 This parameter defines the Annex's
    encryption key used when exchanging messages
    between the Annex and the security server.
    1.3.6.1.4.1.15.2.5.32 anxSysLogMask 1 1 Defines the priority levels of events logged
    in the Annex syslog file.

    The allowable values are 'all', 'none', or
    one or more of t…
    1.3.6.1.4.1.15.2.5.33 anxSysLogFacility 1 1 This parameter defines the 4.3BSD syslog
    facility used in logging the Annex messages.
    1.3.6.1.4.1.15.2.5.34 anxSysLogHost 1 1 The Internet address of the host configured to
    log Annex messages.
    1.3.6.1.4.1.15.2.5.35 anxCliPrompt 1 1 The string used by the Annex to prompt all
    CLI users.
    1.3.6.1.4.1.15.2.5.36 anxMotdFile 1 1 The host file name that contains the
    message-of-the-day for the Annex.
    1.3.6.1.4.1.15.2.5.37 anxTftpDirName 1 1 Specifies the directory name to be prepended
    to all files (boot image, motd, macros, etc.)
    when booting via TFTP.
    1.3.6.1.4.1.15.2.5.38 anxTftpDumpName 1 1 The full pathname of the TFTP dump file, if any.
    1.3.6.1.4.1.15.2.5.39 anxTimeZone 1 1 Defines the timezone where the Annex resides in
    minutes west of GMT.
    1.3.6.1.4.1.15.2.5.40 anxDaylightSavings 1 1 Defines the daylight savings time for the geographic
    location of the Annex.
    1.3.6.1.4.1.15.2.5.41 anxLatKey 1 1 The Annex specific LAT key used to enable
    or disable the LAT protocol.
    1.3.6.1.4.1.15.2.5.42 anxCircuitTimer 1 1 The time interval in tens of milliseconds
    between the transmission of LAT packets.
    1.3.6.1.4.1.15.2.5.43 anxFacilityNum 1 1 The LAT facility number.
    1.3.6.1.4.1.15.2.5.44 anxLatGroupVal 1 1 The Annex LAT group code for permitting access
    to LAT services. To access a specific LAT
    service, the Annex must have at least o…
    1.3.6.1.4.1.15.2.5.45 anxKeepAliveTimer 1 1 The time interval, in seconds, between the
    transmission of identification packets during
    times of network inactivity.
    1.3.6.1.4.1.15.2.5.46 anxReXmitLimit 1 1 The number of times to retransmit a packet
    before notifying the user of a network failure.
    1.3.6.1.4.1.15.2.5.47 anxServerName 1 1 A string of up to 16 characters used to name
    the Annex in the LAT protocol.
    1.3.6.1.4.1.15.2.5.48 anxServiceLimit 1 1 This parameter defines the upper bound on the
    number of services that the Annex can maintain
    in its local service table.
    1.3.6.1.4.1.15.2.5.49 anxConfigFile 1 1 The name of the host file that contains the alias
    and menu entries.
    1.3.6.1.4.1.15.2.5.50 anxLatVcliGroupVal 1 1 This Annex parameter specifies which remote
    group codes are accessible to virtual cli users.
    All virtual cli users have the same …
    1.3.6.1.4.1.15.2.5.51 anxLatQueueMax 1 1 Defines the maximum number of host requests
    (HIC's) that the Annex will save in its internal
    queue when the requested resource is…
    1.3.6.1.4.1.15.2.5.52 anxLatLocation 1 1 A string of up to 32 characters used to
    identify the location of the Annex for
    the LAT protocol.
    1.3.6.1.4.1.15.2.5.53 anxDisabledModules 1 1 Defines which selectable modules are
    currently disabled. The allowable values
    are 'all', 'none' or one or more of the
    following n…
    1.3.6.1.4.1.15.2.5.54 anxSysLogPort 1 1 Specifies the Annex port number where syslog
    messages are sent. If set to 0, syslog
    messages are not sent to an Annex port. Thi…
    1.3.6.1.4.1.15.2.5.55 anxOptionKey 1 1 The Annex specific software option key used to
    enable or disable the AppleTalk, dynamic routing
    and TN3270 support.

    This MIB obje…
    1.3.6.1.4.1.15.2.5.56 anxIpFwdBcast 1 1 When enabled, all broadcasted IP packets are
    forwarded to all interfaces.

    This MIB object corresponds to the NA/admin
    Annex param…
    1.3.6.1.4.1.15.2.5.57 anxLooseSrcRoute 1 1 When enabled, the Annex allows internet loose
    source routing.

    This MIB object corresponds to the NA/admin
    Annex parameter 'loose_…
    1.3.6.1.4.1.15.2.5.58 anxAppleTalkRouter 1 1 The Ethernet address of the AppleTalk router.
    The default value is 0-0-0-0-0-0. Each part
    of the address must be a hex value sep…
    1.3.6.1.4.1.15.2.5.59 anxAppleTalkDefZones 1 1 The comma separated list of AppleTalk zone names
    used as a default when ACP cannot supply the actual
    set of zone names. Commas, …
    1.3.6.1.4.1.15.2.5.60 anxAppleTalkNodeId 1 1 The AppleTalk node ID that the Annex first tries
    to use at startup. The address consists of two
    parts separated by a dot. The a…
    1.3.6.1.4.1.15.2.5.61 anxAppleTalkZone 1 1 The zone name that the Annex first tries to
    use at startup. Spaces and double quotes can
    be used in the zone name by preceding t…
    1.3.6.1.4.1.15.2.5.62 anxRipRouteList 1 1 A list of one to eight IP addresses in
    dotted address format (ddd.ddd.ddd.ddd) with comma
    separators between the addresses. This…
    1.3.6.1.4.1.15.2.5.63 anxRipAuth 1 1 This is a clear text password that is used to
    authenticate the RIP packets. If the NULL
    string is specified, RIP packet authenti…
    1.3.6.1.4.1.15.2.5.64 anxTcpKeepAlive 1 1 The default keep-alive value in minutes for
    connections to this Annex. If this is zero, use
    the default value of 120 minutes. I…
    1.3.6.1.4.1.15.2.5.65 anxMaxModemCalls 1 1 The number of calls for which modem call accounting
    information is kept. The default value is 20.
    1.3.6.1.4.1.15.2.5.66 anxOutputTtl 1 1 The value that is placed in the ttl field of all
    locally generated IP packets. The default value
    is 64.

    This MIB object correspo…
    1.3.6.1.4.1.15.2.5.67 anxSessionLimit 1 1 The maximum number of sessions allowed on the
    Annex. The default is 1152. The maximum value that
    can be set is actually 16 time…
    1.3.6.1.4.1.15.2.5.68 anxLockEnable 1 1 When enabled, allows any port user to use
    the LOCK DECServer command. The default
    value is enabled.

    This MIB object corresponds …
    1.3.6.1.4.1.15.2.5.70 anxLatMulticastTimer 1 1 The elapsed time in seconds between
    transmission of service announcements.
    The default value is 30 seconds.

    This MIB object corre…
    1.3.6.1.4.1.15.2.5.71 anxChapAuthname 1 1 The name associated with the Annex that
    is used to fill the Name field in the PPP
    CHAP challenge message. If this value
    is a zero…
    1.3.6.1.4.1.15.2.5.72 anxTimeServerAddr 1 1 The Internet address of the time server host.

    This MIB object corresponds to the NA/admin
    Annex parameter 'time_server'.
    1.3.6.1.4.1.15.2.5.78 anxMopPrefHost 1 1 The Ethernet address of the preferred MOP
    load/dump host. The default value is 0-0-0-0-0-0.
    Each part of the address must be a h…
    1.3.6.1.4.1.15.2.5.79 anxMopPassword 1 1 The 8 byte hexadecimal MOP maintenance
    password. Each byte is represented by two
    hex digits in the string.

    This MIB object corre…
    1.3.6.1.4.1.15.2.5.80 anxMopLoginPassword 1 1 The password for all ports where anxpCliInterface
    parameter is set to vci and anxpVciLoginPortPassword
    is enabled. The default v…
    1.3.6.1.4.1.15.2.5.81 anxMopLoginPrompt 1 1 The password prompt for all ports whose
    anxpCliInterface parameter is set to vci.
    The default is '#'.

    This MIB object corresponds…
    1.3.6.1.4.1.15.2.5.82 anxMopLoginTimer 1 1 The inactivity timer for all ports whose
    anxpCliInterface parameter is set to vci.
    Setting this object to 0 results in a default
    v…
    1.3.6.1.4.1.15.2.5.83 anxIpxFrameType 1 1 The framing used for IPX protocol
    packets. The default value is raw802.

    This MIB object corresponds to the NA/admin
    Annex parame…
    1.3.6.1.4.1.15.2.5.89 anxTmuxEnable 1 1 Controls whether the Annex uses TMux
    to multiplex small TCP or UDP packets
    into a single IP packet. The host must also
    support TM…
    1.3.6.1.4.1.15.2.5.90 anxTmuxMaxHost 1 1 The maximum size of the Tmux address table.
    If the number of host addresses exceeds this limit,
    the oldest entry is flushed. The…
    1.3.6.1.4.1.15.2.5.91 anxTmuxMaxMpx 1 1 The largest packet that can be placed in a TMux
    packet. Larger packets are not multiplexed but are
    directly passed to the IP lay…
    1.3.6.1.4.1.15.2.5.92 anxTmuxDelay 1 1 The maximum amount of time used to accumulate
    smaller packets into a larger packet. When the time
    expires, the multiplexed packe…
    1.3.6.1.4.1.15.2.5.93 anxAllowSets 1 1 This object will return whether SNMP manager(client)
    has access to read or read-write the MIB objects.
    The access is determined b…
    1.3.6.1.4.1.15.2.5.94 anxDefaultImageName 1 1 The name of the image file that is loaded by
    default when booting the Annex.

    This MIB object corresponds to the NA/admin
    Annex pa…
    1.3.6.1.4.1.15.2.5.95 anxLatGroupMap 1 1 This parameter is functionally identical to
    anxLatGroupVal and corresponds to the NA/admin
    Annex parameter 'group_value'.

    The synt…
    1.3.6.1.4.1.15.2.5.96 anxLatVcliGroupMap 1 1 This parameter is functionally identical to
    anxLatVcliGroupVal and corresponds to the
    NA/admin Annex parameter 'vcli_groups'.

    The …
    1.3.6.1.4.1.15.2.5.97 anxMultiSession 1 1 This parameter allows multisession operation to be
    managed on a terminal server basis. It tells that the
    server is configured for…
    1.3.6.1.4.1.15.2.5.98 anxVcliInactivity 1 1 This parameter will specify the amount of time in
    minutes that a vcli session can remain inactive. If
    the timer expires, the anne…
    1.3.6.1.4.1.15.2.5.99 anxDHCPServer1Addr 1 1 The Internet address of the primary DHCP
    server host. This MIB object corresponds
    to the NA/admin Annex parameter
    `pref_DHCP1_addr…
    1.3.6.1.4.1.15.2.5.100 anxDHCPServer2Addr 1 1 The Internet address of the secondary DHCP
    server host. This MIB object corresponds
    to the NA/admin Annex parameter
    `pref_DHCP2_ad…
    1.3.6.1.4.1.15.2.5.101 anxDHCPServerBcast 1 1 This parameter controls whether the Annex
    broadcasts a DHCPDISCOVER request if the
    preferred DHCP servers do not respond.
    This MIB…
    1.3.6.1.4.1.15.2.5.102 anxConfigServer 1 1 The IP address of the host from where
    the config file was downloaded.
    1.3.6.1.4.1.15.2.5.103 anxMaxChapChallInt 1 1 Specifies maximum value for the random CHAP
    re-challenge interval. Valid values are in
    range of 0 to 65535 seconds. Value of 0 …
    1.3.6.1.4.1.15.2.5.104 anxMMPEnable 1 1 Enables or disables MMP in the Remote Annex.

    This MIB object corresponds to the NA/admin
    parameter mmp_enabled.
    1.3.6.1.4.1.15.2.5.106 anxModulesDisabled 1 1 A bit array that contains the setting
    of selectable modules that are currently disabled.
    The allowable values are:

    0x00000001 - ad…
    1.3.6.1.4.1.15.2.5.107 securityProtocol 1 1 Values of this object can either be set to acp or radius to
    indicate which protocol this annex will use. Change of this
    parameter…
    1.3.6.1.4.1.15.2.5.108 anxRipForceNewrt 1 1 When enabled, this parameter specifies the timeout value in
    seconds that the Annex waits for a router to send periodic RIP
    update…
    1.3.6.1.4.1.15.2.5.109 anxNbnServer1Addr 1 1 The Internet address of the primary NetBIOS
    nameserver host.

    This MIB object corresponds to the NA/admin
    Annex parameter 'pref_nb…
    1.3.6.1.4.1.15.2.5.110 anxNbnServer2Addr 1 1 The Internet address of the secondary NetBIOS
    nameserver host.

    This MIB object corresponds to the NA/admin
    Annex parameter 'pref_…
    1.3.6.1.4.1.15.2.5.111 anxNameserverOverride 1 1 Indicates whether or not to override the PPP
    Client's nameserver address during IPCP negotiations.
    Set this to `enable' for serve…
    1.3.6.1.4.1.15.2.5.112 anxBootpEnable 1 1 This parameter turns on and off the BOOTP relay
    functionality.

    This MIB object corresponds to the na/admin
    parameter 'bootp_enabl…
    1.3.6.1.4.1.15.2.5.113 anxRoutePref 1 1 This parameter determines which routing protocol
    will take precedence in the routing table. The
    default value is 'rip'.

    This MIB…
    1.3.6.1.4.1.15.2.5.114 anxRtableSize 1 1 This parameter sets the maximun number of different
    routes (address and mask) allowed in the routing
    table. The allowable values…
    1.3.6.1.4.1.15.2.5.115 anxOppasswd 1 1 Setting this parameter changes the Annex's
    operator level password. Reading this parameter
    will return either if the password i…
    ...