Allows the processing of IP RIP 1 packets received from
for this LAN port: a change requires rebooting.
fpEtherIpOptRecvRIP, fpEtherIpOptRecvRIP1, and
fpEtherIpOptRecvRIP2 are mutually exclusive.
Parsed from file flowpoint2.mib.txt
Company: None
Module: FLOWPOINT-MIB
Allows the processing of IP RIP 1 packets received from
for this LAN port: a change requires rebooting.
fpEtherIpOptRecvRIP, fpEtherIpOptRecvRIP1, and
fpEtherIpOptRecvRIP2 are mutually exclusive.
Parsed from file FLOWPOINT-MIB.mib
Module: FLOWPOINT-MIB
Vendor: FlowPoint Corporation
Module: FLOWPOINT-MIB
[Automatically extracted from oidview.com]
fpEtherIpOptRecvRIP1 OBJECT-TYPE SYNTAX INTEGER { enable(1), disable(2) } ACCESS read-write STATUS mandatory DESCRIPTION "Allows the processing of IP RIP 1 packets received from for this LAN port: a change requires rebooting. fpEtherIpOptRecvRIP, fpEtherIpOptRecvRIP1, and fpEtherIpOptRecvRIP2 are mutually exclusive." ::= { fpEtherEntry 15 }
fpEtherIpOptRecvRIP1 OBJECT-TYPE SYNTAX INTEGER { enable(1), disable(2) } ACCESS read-write STATUS mandatory DESCRIPTION "Allows the processing of IP RIP 1 packets received from for this LAN port: a change requires rebooting. fpEtherIpOptRecvRIP, fpEtherIpOptRecvRIP1, and fpEtherIpOptRecvRIP2 are mutually exclusive." ::= { fpEtherEntry 15 }
OID | Name | Sub children | Sub Nodes Total | Description |
---|---|---|---|---|
1.3.6.1.4.1.1548.2.1.1.1 | fpPortNum | 0 | 0 | The identifier number of this interface port. |
1.3.6.1.4.1.1548.2.1.1.2 | fpBridgeState | 0 | 0 | The object is used to show current state (enabled/ disabled) of the bridging the LAN port (ethernet). 1 2 The bridging is enabled/d… |
1.3.6.1.4.1.1548.2.1.1.3 | fpIpState | 0 | 0 | Determines whether the IP protocol is routed (enable) or not (disable) via this LAN interface. A change requires rebooting. If th… |
1.3.6.1.4.1.1548.2.1.1.4 | fpIpxState | 0 | 0 | Determines whether the IPX protocol is routed (enable) or not (disable) via this LAN interface. A change requires rebooting. |
1.3.6.1.4.1.1548.2.1.1.5 | fpIpNetAddress | 0 | 0 | This object allows to get or set the IP address for this LAN interface: a change requires rebooting. |
1.3.6.1.4.1.1548.2.1.1.6 | fpIpNetMask | 0 | 0 | This object allows to get or set the IP network mask for this LAN interface: a change requires rebooting. |
1.3.6.1.4.1.1548.2.1.1.7 | fpIpxNetAddress | 0 | 0 | This objects allows to get or set the IPX external network number for this LAN port: a change requires rebooting. |
1.3.6.1.4.1.1548.2.1.1.8 | fpIpxFrameType | 0 | 0 | This objects allows to get or set the IPX frame type generated by the router for this LAN port: a change requires rebooting. Poss… |
1.3.6.1.4.1.1548.2.1.1.9 | fpEtherIpOptRecvRIP | 0 | 0 | Allows the processing of IP RIP 1 and RIP 2 packets received from for this LAN port: a change requires rebooting. This setting i… |
1.3.6.1.4.1.1548.2.1.1.10 | fpEtherIpOptSendRIP | 0 | 0 | Allows sending IP RIP 1 compatible packets to this LAN port when IP routing is enabled: a change requires rebooting. This settin… |
1.3.6.1.4.1.1548.2.1.1.11 | fpEtherIpOptRecvRIPDefault | 0 | 0 | Allows updating the IP routing table with the default route (i.e. 0.0.0.0) received from this LAN port when IP routing is enabled… |
1.3.6.1.4.1.1548.2.1.1.12 | fpEtherIpOptSendRIPDefault | 0 | 0 | Allows this system to advertise itself as the default router on this LAN port when IP routing is enabled. This setting is enabled… |
1.3.6.1.4.1.1548.2.1.1.13 | fpIpxStrNetAddress | 0 | 0 | This objects allows to get or set the IPX external network number for this LAN port: a change requires rebooting. This object is… |
1.3.6.1.4.1.1548.2.1.1.14 | fpIpDefaultGateway | 0 | 0 | This object allows to get or set the IP address for the default Gateway (default route), and assign it to the interface specified… |
1.3.6.1.4.1.1548.2.1.1.16 | fpEtherIpOptSendRIP1 | 0 | 0 | Allows sending IP RIP 1 packets to this LAN port when IP routing is enabled: a change requires rebooting. fpEtherIpOptSendRIP, fp… |
1.3.6.1.4.1.1548.2.1.1.17 | fpEtherIpOptRecvRIP2 | 0 | 0 | Allows the processing of IP RIP 2 packets received from for this LAN port: a change requires rebooting. fpEtherIpOptRecvRIP, fpEt… |
1.3.6.1.4.1.1548.2.1.1.18 | fpEtherIpOptSendRIP2 | 0 | 0 | Allows sending IP RIP 2 packets to this LAN port when IP routing is enabled: a change requires rebooting. fpEtherIpOptSendRIP, fp… |
1.3.6.1.4.1.1548.2.1.1.19 | fpIpRIPMulticastAddress | 0 | 0 | This object allows to get or set the RIP 2 Multicast address for this LAN interface: set to 0.0.0.0 to restore the default multic… |
1.3.6.1.4.1.1548.2.1.1.20 | fpNATState | 0 | 0 | Determines whether IP address/port translation is performed via this LAN interface if the IP protocol is routed (enable) through … |
1.3.6.1.4.1.1548.2.1.1.21 | fpMtu | 0 | 0 | When non-zero, the desired MTU size for this interface. When zero, use the default MTU size for the interface. The MTU size used … |