When non-zero, the desired MTU size for this interface.
When zero, use the default MTU size for the interface.
The MTU size used is the minimum of the desired MTU size
for this interface and the maximum MTU size allowed for
the interface.
Parsed from file flowpoint2.mib.txt
Company: None
Module: FLOWPOINT-MIB
When non-zero, the desired MTU size for this interface.
When zero, use the default MTU size for the interface.
The MTU size used is the minimum of the desired MTU size
for this interface and the maximum MTU size allowed for
the interface.
Parsed from file FLOWPOINT-MIB.mib
Module: FLOWPOINT-MIB
Vendor: FlowPoint Corporation
Module: FLOWPOINT-MIB
[Automatically extracted from oidview.com]
fpMtu OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "When non-zero, the desired MTU size for this interface. When zero, use the default MTU size for the interface. The MTU size used is the minimum of the desired MTU size for this interface and the maximum MTU size allowed for the interface." ::= { fpEtherEntry 21 }
fpMtu OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "When non-zero, the desired MTU size for this interface. When zero, use the default MTU size for the interface. The MTU size used is the minimum of the desired MTU size for this interface and the maximum MTU size allowed for the interface." ::= { fpEtherEntry 21 }
OID | Name | Sub children | Sub Nodes Total | Description |
---|---|---|---|---|
1.3.6.1.4.1.1548.2.1.1.1 | fpPortNum | 0 | 0 | The identifier number of this interface port. |
1.3.6.1.4.1.1548.2.1.1.2 | fpBridgeState | 0 | 0 | The object is used to show current state (enabled/ disabled) of the bridging the LAN port (ethernet). 1 2 The bridging is enabled/d… |
1.3.6.1.4.1.1548.2.1.1.3 | fpIpState | 0 | 0 | Determines whether the IP protocol is routed (enable) or not (disable) via this LAN interface. A change requires rebooting. If th… |
1.3.6.1.4.1.1548.2.1.1.4 | fpIpxState | 0 | 0 | Determines whether the IPX protocol is routed (enable) or not (disable) via this LAN interface. A change requires rebooting. |
1.3.6.1.4.1.1548.2.1.1.5 | fpIpNetAddress | 0 | 0 | This object allows to get or set the IP address for this LAN interface: a change requires rebooting. |
1.3.6.1.4.1.1548.2.1.1.6 | fpIpNetMask | 0 | 0 | This object allows to get or set the IP network mask for this LAN interface: a change requires rebooting. |
1.3.6.1.4.1.1548.2.1.1.7 | fpIpxNetAddress | 0 | 0 | This objects allows to get or set the IPX external network number for this LAN port: a change requires rebooting. |
1.3.6.1.4.1.1548.2.1.1.8 | fpIpxFrameType | 0 | 0 | This objects allows to get or set the IPX frame type generated by the router for this LAN port: a change requires rebooting. Poss… |
1.3.6.1.4.1.1548.2.1.1.9 | fpEtherIpOptRecvRIP | 0 | 0 | Allows the processing of IP RIP 1 and RIP 2 packets received from for this LAN port: a change requires rebooting. This setting i… |
1.3.6.1.4.1.1548.2.1.1.10 | fpEtherIpOptSendRIP | 0 | 0 | Allows sending IP RIP 1 compatible packets to this LAN port when IP routing is enabled: a change requires rebooting. This settin… |
1.3.6.1.4.1.1548.2.1.1.11 | fpEtherIpOptRecvRIPDefault | 0 | 0 | Allows updating the IP routing table with the default route (i.e. 0.0.0.0) received from this LAN port when IP routing is enabled… |
1.3.6.1.4.1.1548.2.1.1.12 | fpEtherIpOptSendRIPDefault | 0 | 0 | Allows this system to advertise itself as the default router on this LAN port when IP routing is enabled. This setting is enabled… |
1.3.6.1.4.1.1548.2.1.1.13 | fpIpxStrNetAddress | 0 | 0 | This objects allows to get or set the IPX external network number for this LAN port: a change requires rebooting. This object is… |
1.3.6.1.4.1.1548.2.1.1.14 | fpIpDefaultGateway | 0 | 0 | This object allows to get or set the IP address for the default Gateway (default route), and assign it to the interface specified… |
1.3.6.1.4.1.1548.2.1.1.15 | fpEtherIpOptRecvRIP1 | 0 | 0 | Allows the processing of IP RIP 1 packets received from for this LAN port: a change requires rebooting. fpEtherIpOptRecvRIP, fpEt… |
1.3.6.1.4.1.1548.2.1.1.16 | fpEtherIpOptSendRIP1 | 0 | 0 | Allows sending IP RIP 1 packets to this LAN port when IP routing is enabled: a change requires rebooting. fpEtherIpOptSendRIP, fp… |
1.3.6.1.4.1.1548.2.1.1.17 | fpEtherIpOptRecvRIP2 | 0 | 0 | Allows the processing of IP RIP 2 packets received from for this LAN port: a change requires rebooting. fpEtherIpOptRecvRIP, fpEt… |
1.3.6.1.4.1.1548.2.1.1.18 | fpEtherIpOptSendRIP2 | 0 | 0 | Allows sending IP RIP 2 packets to this LAN port when IP routing is enabled: a change requires rebooting. fpEtherIpOptSendRIP, fp… |
1.3.6.1.4.1.1548.2.1.1.19 | fpIpRIPMulticastAddress | 0 | 0 | This object allows to get or set the RIP 2 Multicast address for this LAN interface: set to 0.0.0.0 to restore the default multic… |
1.3.6.1.4.1.1548.2.1.1.20 | fpNATState | 0 | 0 | Determines whether IP address/port translation is performed via this LAN interface if the IP protocol is routed (enable) through … |