This table defines Kernel Options.
Parsed from file flowpoint2.mib.txt
Company: None
Module: FLOWPOINT-MIB
This table defines Kernel Options.
Parsed from file FLOWPOINT-MIB.mib
Module: FLOWPOINT-MIB
Vendor: FlowPoint Corporation
Module: FLOWPOINT-MIB
[Automatically extracted from oidview.com]
fpOptionTable OBJECT-TYPE SYNTAX SEQUENCE OF FpOptionEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This table defines Kernel Options." ::= { fpsys 40 }
fpOptionTable OBJECT-TYPE SYNTAX SEQUENCE OF FpOptionEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This table defines Kernel Options." ::= { fpsys 40 }
OID | Name | Sub children | Sub Nodes Total | Description |
---|---|---|---|---|
1.3.6.1.4.1.1548.4.40.1 | fpOptionEntry | 3 | 3 | A string in the fpOptionTable specifies information pertaining to options built into the kernel -and- which options are available. |
OID | Name | Sub children | Sub Nodes Total | Description |
---|---|---|---|---|
1.3.6.1.4.1.1548.4.1 | fpSysName | 1 | 1 | An administratively-assigned name for this managed node. It will be the same name as the one defined in MIB2. |
1.3.6.1.4.1.1548.4.2 | fpSysMessage | 1 | 1 | An administratively-assigned message for this managed node. |
1.3.6.1.4.1.1548.4.3 | fpSysPassword | 1 | 1 | An administratively-assigned password for this managed node. The password will be used in the authentication phase of PPP. GENE… |
1.3.6.1.4.1.1548.4.4 | fpSysAuthen | 1 | 1 | An administratively-assigned authentication override type for this managed node. This is normally set to NONE, which means the no… |
1.3.6.1.4.1.1548.4.5 | fpSysOperation | 1 | 1 | Use this object to save/load the system configuration (only what is defined in this group) to/from FLASH memory, or perform other… |
1.3.6.1.4.1.1548.4.6 | fpSysSoftwareVer | 1 | 1 | Displays the software version run by the system. |
1.3.6.1.4.1.1548.4.7 | fpSysHardwareVer | 1 | 1 | Displays the system model number, revision and serial number. |
1.3.6.1.4.1.1548.4.8 | fpLoginPassword | 1 | 1 | Assign or change the administrator's password for login. Writing objects can only be performed when logged-in, using this passwo… |
1.3.6.1.4.1.1548.4.9 | fpWriteTimeout | 1 | 1 | None |
1.3.6.1.4.1.1548.4.10 | fpWriteTimer | 1 | 1 | This object retrieves the current security timer value. It returns how many minutes are left (if any) before a new login must be … |
1.3.6.1.4.1.1548.4.11 | fpCommunityName | 1 | 1 | To change or retrieve the SNMP community name. The default name is 'public'. |
1.3.6.1.4.1.1548.4.12 | fpInternetFireWall | 1 | 1 | To enable or disable the internet firewall filter. The filter discards any IP packet arriving from the WAN with a source IP addre… |
1.3.6.1.4.1.1548.4.13 | fpSysLogout | 1 | 1 | Writing to this object prevents any change from any SNMP manager (until logged in again). Changes from telnet and the console ar… |
1.3.6.1.4.1.1548.4.14 | fpIpxSupported | 1 | 1 | Indicates whether or not IPX is supported in the router software. For compatibility with previous non-IPX-capable builds, the ma… |
1.3.6.1.4.1.1548.4.15 | fpSysCallerIdTable | 1 | 2 | This table defines the types of connections for which CallerID information should be verified. |
1.3.6.1.4.1.1548.4.16 | fpMIBCompatibility | 1 | 1 | Indicates that this private MIB is fully compatible with RFC 1155. For compatibility with previous builds, the manager should co… |
1.3.6.1.4.1.1548.4.17 | fpPOTSInstalled | 1 | 1 | Indicates whether or not POTS hardware is installed AND is software supported. For compatibility with previous builds, the manag… |
1.3.6.1.4.1.1548.4.18 | fpSysLastLogEvent | 1 | 1 | The last system event reported to the console. This includes the timestamp, the subsystem and the actual text message of the even… |
1.3.6.1.4.1.1548.4.19 | fpSysSingleUser | 1 | 1 | This IP address used to define the single address to which IP translation was to occur (one client system at a time), or cancelli… |
1.3.6.1.4.1.1548.4.20 | fpSysYear | 1 | 1 | Set this object to specify the year for the real time clock, protected by a battery when the power is off. When all the related p… |
1.3.6.1.4.1.1548.4.21 | fpSysMonth | 1 | 1 | Set this object to specify the month for the real time clock, protected by a battery when the power is off. When all the related … |
1.3.6.1.4.1.1548.4.22 | fpSysDay | 1 | 1 | Set this object to specify the day for the real time clock, protected by a battery when the power is off. When all the related pa… |
1.3.6.1.4.1.1548.4.23 | fpSysHour | 1 | 1 | Set this object to specify the hour for the real time clock, protected by a battery when the power is off. When all the related p… |
1.3.6.1.4.1.1548.4.24 | fpSysMinute | 1 | 1 | Set this object to specify the minutes for the real time clock, protected by a battery when the power is off. When all the relate… |
1.3.6.1.4.1.1548.4.25 | fpSysSecond | 1 | 1 | Set this object to specify the seconds for the real time clock, protected by a battery when the power is off. When all the relate… |
1.3.6.1.4.1.1548.4.26 | fpSysDefaultSingleUser | 1 | 1 | Network Address Translation (NAT) and its ability to define server mappings (with sysIPTranslationServerTable) has rendered this … |
1.3.6.1.4.1.1548.4.27 | fpSysBootpRelay | 1 | 1 | This object allows to get or set the IP address of the DHCP/BOOTP Server when this router is acting as a Bootp relay agent. When… |
1.3.6.1.4.1.1548.4.28 | fpSysKernelRevision | 1 | 1 | This object represents the number of times that the source code got changed, possibly resulting in the support of new features. … |
1.3.6.1.4.1.1548.4.29 | fpSysTelnetPort | 1 | 1 | The TCP port for reception of telnet connections to the router. Setting this value to zero disables telnetting to the router. T… |
1.3.6.1.4.1.1548.4.30 | fpSysSNMPPort | 1 | 1 | The TCP port for reception of SNMP requests to the router. Setting this value to zero disables SNMP management of the router. T… |
1.3.6.1.4.1.1548.4.31 | fpWAN2WANForwarding | 1 | 1 | To enable or disable the forwarding of data traffic from one wan link to another wan link. |
1.3.6.1.4.1.1548.4.32 | fpUdpRelayTable | 1 | 5 | This table defines UDP ports for which relaying should should be performed when this UDP traffic is broadcast. |
1.3.6.1.4.1.1548.4.33 | fpOneWANConnection | 1 | 1 | To enable or disable the bringing up of more than one wan link at a time to different destinations. |
1.3.6.1.4.1.1548.4.34 | fpSysHTTPPort | 1 | 1 | The TCP port for reception of HTTP requests to the router. Setting this value to zero disables HTTP management of the router. T… |
1.3.6.1.4.1.1548.4.35 | fpDirectedBroadcasts | 1 | 1 | Enable/disable directed broadcasts to a directly connected interface. |
1.3.6.1.4.1.1548.4.36 | fpBlockNetBIOSDefault | 1 | 1 | To set the default when a new remote is created that controls if the remote will block NetBIOS traffic. |
1.3.6.1.4.1.1548.4.37 | fpSysFlashAvailable | 1 | 1 | This object represents the number of bytes of flash available in the flash file system. |
1.3.6.1.4.1.1548.4.38 | fpVoiceTable | 1 | 3 | This table defines voice ports for voice routers. |
1.3.6.1.4.1.1548.4.39 | fpEchoTable | 1 | 3 | This table defines echo ports. |