swFCPortPhyState OBJECT-TYPE
SYNTAX INTEGER {
noCard (1),
noGbic (2),
laserFault (3),
noLight (4),
noSync (5),
inSync (6),
portFault (7),
diagFault (8),
lockRef (9)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION "This object identifies the physical state of
the port:
noCard(1) no card present in this switch slot;
noGbic(2) no GBIC module in this port;
laserFault(3) the module is signaling a laser fault
(defective GBIC);
noLight(4) the module is not receiving light;
noSync(5) the module is receiving light but is
out of sync;
inSync(6) the module is receiving light and is
in sync;
portFault(7) the port is marked faulty (defective
GBIC, cable or device);
diagFault(8) the port failed diagnostics (defective
G_Port or FL_Port card or motherboard);
lockRef(9) the port is locking to the reference
signal.
"
View at oid-info.com
This object identifies the physical state of
the port:
noCard(1) no card present in this switch slot;
noGbic(2) no GBIC module in this port;
laserFault(3) the module is signaling a laser fault
(defective GBIC);
noLight(4) the module is not receiving light;
noSync(5) the module is receiving light but is
out of sync;
inSync(6) the module is receiving light and is
in sync;
portFault(7) the port is marked faulty (defective
GBIC, cable or device);
diagFault(8) the port failed diagnostics (defective
G_Port or FL_Port card or motherboard);
lockRef(9) the port is locking to the reference
signal.
Parsed from file v2.0.1aSW.mib.txt
Company: None
Module: SW-MIB
This object identifies the physical state of
the port:
noCard(1) no card present in this switch slot;
noTransceiver(2) no Transceiver module in this port.
noGbic(2) was used previously. Transceiver
is the generic name for GBIC, SFP etc.;
laserFault(3) the module is signaling a laser fault
(defective Transceiver);
noLight(4) the module is not receiving light;
noSync(5) the module is receiving light but is
out of sync;
inSync(6) the module is receiving light and is
in sync;
portFault(7) the port is marked faulty (defective
Transceiver, cable or device);
diagFault(8) the port failed diagnostics (defective
G_Port or FL_Port card or motherboard);
lockRef(9) the port is locking to the reference
signal.
Parsed from file SW-MIB.mib
Module: SW-MIB
Automatically extracted from SilkWorm Switch MIBs and RSH Utilities
swFCPortPhyState OBJECT-TYPE SYNTAX INTEGER { noCard (1), noGbic (2), laserFault (3), noLight (4), noSync (5), inSync (6), portFault (7), diagFault (8), lockRef (9) } ACCESS read-only STATUS mandatory DESCRIPTION "This object identifies the physical state of the port: noCard(1) no card present in this switch slot; noGbic(2) no GBIC module in this port; laserFault(3) the module is signaling a laser fault (defective GBIC); noLight(4) the module is not receiving light; noSync(5) the module is receiving light but is out of sync; inSync(6) the module is receiving light and is in sync; portFault(7) the port is marked faulty (defective GBIC, cable or device); diagFault(8) the port failed diagnostics (defective G_Port or FL_Port card or motherboard); lockRef(9) the port is locking to the reference signal. " ::= { swFCPortEntry 3 }
swFCPortPhyState OBJECT-TYPE SYNTAX INTEGER { noCard (1), noTransceiver (2), laserFault (3), noLight (4), noSync (5), inSync (6), portFault (7), diagFault (8), lockRef (9) } MAX-ACCESS read-only STATUS current DESCRIPTION "This object identifies the physical state of the port: noCard(1) no card present in this switch slot; noTransceiver(2) no Transceiver module in this port. noGbic(2) was used previously. Transceiver is the generic name for GBIC, SFP etc.; laserFault(3) the module is signaling a laser fault (defective Transceiver); noLight(4) the module is not receiving light; noSync(5) the module is receiving light but is out of sync; inSync(6) the module is receiving light and is in sync; portFault(7) the port is marked faulty (defective Transceiver, cable or device); diagFault(8) the port failed diagnostics (defective G_Port or FL_Port card or motherboard); lockRef(9) the port is locking to the reference signal. " ::= { swFCPortEntry 3 }
| OID | Name | Sub children | Sub Nodes Total | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.1588.2.1.1.1.6.2.1.1 | swFCPortIndex | 0 | 0 | This object identifies the switch port index. Note that the value of a port index is 1 higher than the port number labeled on the… |
| 1.3.6.1.4.1.1588.2.1.1.1.6.2.1.2 | swFCPortType | 0 | 0 | This object identifies the type of switch port. It may be of type stitch(1), flannel(2) or loom(3). |
| 1.3.6.1.4.1.1588.2.1.1.1.6.2.1.4 | swFCPortOpStatus | 0 | 0 | This object identifies the operational status of the port. The online(1) state indicates that user frames can be passed. The unkn… |
| 1.3.6.1.4.1.1588.2.1.1.1.6.2.1.5 | swFCPortAdmStatus | 0 | 0 | The desired state of the port. A management station may place the port in a desired state by setting this object accordingly. Th… |
| 1.3.6.1.4.1.1588.2.1.1.1.6.2.1.6 | swFCPortLinkState | 0 | 0 | This object indicates the link state of the port. The value may be: enabled(1) - port is allowed to participate in the FC-PH proto… |
| 1.3.6.1.4.1.1588.2.1.1.1.6.2.1.7 | swFCPortTxType | 0 | 0 | This object indicates the media transmitter type of the port. The value may be: unknown(1) cannot determined to the port driver l… |
| 1.3.6.1.4.1.1588.2.1.1.1.6.2.1.11 | swFCPortTxWords | 0 | 0 | This object counts the number of Fibre Channel words that the port has transmitted. |
| 1.3.6.1.4.1.1588.2.1.1.1.6.2.1.12 | swFCPortRxWords | 0 | 0 | This object counts the number of Fibre Channel words that the port has received. |
| 1.3.6.1.4.1.1588.2.1.1.1.6.2.1.13 | swFCPortTxFrames | 0 | 0 | This object counts the number of (Fibre Channel) frames that the port has transmitted. |
| 1.3.6.1.4.1.1588.2.1.1.1.6.2.1.14 | swFCPortRxFrames | 0 | 0 | This object counts the number of (Fibre Channel) frames that the port has received. |
| 1.3.6.1.4.1.1588.2.1.1.1.6.2.1.15 | swFCPortTxC2Frames, swFCPortRxC2Frames | 0 | 0 | This object counts the number of Class 2 frames that the port has received. |
| 1.3.6.1.4.1.1588.2.1.1.1.6.2.1.16 | swFCPortRxC3Frames | 0 | 0 | This object counts the number of Class 3 frames that the port has received. |
| 1.3.6.1.4.1.1588.2.1.1.1.6.2.1.17 | swFCPortRxLCs | 0 | 0 | This object counts the number of Link Control frames that the port has received. |
| 1.3.6.1.4.1.1588.2.1.1.1.6.2.1.18 | swFCPortRxMcasts | 0 | 0 | This object counts the number of Multicast frames that the port has received. |
| 1.3.6.1.4.1.1588.2.1.1.1.6.2.1.19 | swFCPortTooManyRdys | 0 | 0 | This object counts the number of times when RDYs exceeds the frames received. |
| 1.3.6.1.4.1.1588.2.1.1.1.6.2.1.20 | swFCPortNoTxCredits | 0 | 0 | This object counts the number of times when the transmit credit has reached zero. |
| 1.3.6.1.4.1.1588.2.1.1.1.6.2.1.21 | swFCPortRxEncInFrs | 0 | 0 | This object counts the number of encoding error or disparity error inside frames received. |
| 1.3.6.1.4.1.1588.2.1.1.1.6.2.1.22 | swFCPortRxCrcs | 0 | 0 | This object counts the number of CRC errors detected for frames received. |
| 1.3.6.1.4.1.1588.2.1.1.1.6.2.1.23 | swFCPortRxTruncs | 0 | 0 | This object counts the number of truncated frames that the port has received. |
| 1.3.6.1.4.1.1588.2.1.1.1.6.2.1.24 | swFCPortRxTooLongs | 0 | 0 | This object counts the number of received frames that are too long. |
| 1.3.6.1.4.1.1588.2.1.1.1.6.2.1.25 | swFCPortRxBadEofs | 0 | 0 | This object counts the number of received frames that have bad EOF delimiter. |
| 1.3.6.1.4.1.1588.2.1.1.1.6.2.1.26 | swFCPortRxEncOutFrs | 0 | 0 | This object counts the number of encoding error or disparity error outside frames received. |
| 1.3.6.1.4.1.1588.2.1.1.1.6.2.1.27 | swFCPortRxBadOs | 0 | 0 | This object counts the number of invalid Ordered Sets received. |
| 1.3.6.1.4.1.1588.2.1.1.1.6.2.1.28 | swFCPortC3Discards | 0 | 0 | This object counts the number of Class 3 frames that the port has discarded. |
| 1.3.6.1.4.1.1588.2.1.1.1.6.2.1.29 | swFCPortMcastTimedOuts | 0 | 0 | This object counts the number of Multicast frames that has been timed out. |
| 1.3.6.1.4.1.1588.2.1.1.1.6.2.1.30 | swFCPortTxMcasts | 0 | 0 | This object counts the number of Multicast frames that has been transmitted. |
| 1.3.6.1.4.1.1588.2.1.1.1.6.2.1.31 | swFCPortLipIns | 0 | 0 | This object counts the number of Loop Initializations that has been initiated by loop devices attached. |
| 1.3.6.1.4.1.1588.2.1.1.1.6.2.1.32 | swFCPortLipOuts | 0 | 0 | This object counts the number of Loop Initializations that has been initiated by the port. |
| 1.3.6.1.4.1.1588.2.1.1.1.6.2.1.33 | swFCPortLipLastAlpa | 0 | 0 | This object indicates the Physical Address (AL_PA) of the loop device that initiated the last Loop Initialization. |
| 1.3.6.1.4.1.1588.2.1.1.1.6.2.1.34 | swFCPortWwn | 0 | 0 | The World_wide_Name of the Fibre Channel port. The contents of an instance are in the IEEE extended format as specified in FC-PH;… |
| 1.3.6.1.4.1.1588.2.1.1.1.6.2.1.35 | swFCPortSpeed | 0 | 0 | The desired baud rate for the port. It can have the values of 1GB (1), 2GB (2), Auto-Negotiate (3) or 4GB (4). Some of the above … |
| 1.3.6.1.4.1.1588.2.1.1.1.6.2.1.36 | swFCPortName | 0 | 0 | A string indicates the name of the addressed port. The names should be persistent across switch reboots. Port names do not have t… |
| 1.3.6.1.4.1.1588.2.1.1.1.6.2.1.37 | swFCPortSpecifier | 0 | 0 | This string indicates the physical port number of the addressed port. The format of the string is: pres… |
| 1.3.6.1.4.1.1588.2.1.1.1.6.2.1.38 | swFCPortFlag | 0 | 0 | A bit map of port status flags which includes the information of port type. Currently this will indicate if the port is vir… |
| 1.3.6.1.4.1.1588.2.1.1.1.6.2.1.39 | swFCPortBrcdType | 0 | 0 | The Brocade port type. |