swFCPortLinkState OBJECT-TYPE
SYNTAX INTEGER {
enabled (1),
disabled (2),
loopback (3)
}
ACCESS read-write
STATUS mandatory
DESCRIPTION "This object indicates the link state of the port.
The value may be:
enabled(1) - port is allowed to participate in the FC-PH
protocol with its attached port (or ports if it is
in a FC-AL loop);
disabled(2) - the port is not allowed to participate in
the FC-PH protocol with its attached port(s);
loopback(3) - the port may transmit frames through an
internal path to verify the health of the transmitter
and receiver path.
Note that when the ports link state changes, its
operational status (swFCPortOpStatus) will be affected."
View at oid-info.com
This object indicates the link state of the port.
The value may be:
enabled(1) - port is allowed to participate in the FC-PH
protocol with its attached port (or ports if it is
in a FC-AL loop);
disabled(2) - the port is not allowed to participate in
the FC-PH protocol with its attached port(s);
loopback(3) - the port may transmit frames through an
internal path to verify the health of the transmitter
and receiver path.
Note that when the port's link state changes, its
operational status (swFCPortOpStatus) will be affected.
Parsed from file v2.0.1aSW.mib.txt
Company: None
Module: SW-MIB
This object indicates the link state of the port.
The value may be:
enabled(1) - port is allowed to participate in the FC-PH
protocol with its attached port (or ports if it is
in a FC-AL loop);
disabled(2) - the port is not allowed to participate in
the FC-PH protocol with its attached port(s);
loopback(3) - the port may transmit frames through an
internal path to verify the health of the transmitter
and receiver path.
Note that when the port's link state changes, its
operational status (swFCPortOpStatus) will be affected.
Parsed from file SW-MIB.mib
Module: SW-MIB
Automatically extracted from SilkWorm Switch MIBs and RSH Utilities
swFCPortLinkState OBJECT-TYPE SYNTAX INTEGER { enabled (1), disabled (2), loopback (3) } ACCESS read-write STATUS mandatory DESCRIPTION "This object indicates the link state of the port. The value may be: enabled(1) - port is allowed to participate in the FC-PH protocol with its attached port (or ports if it is in a FC-AL loop); disabled(2) - the port is not allowed to participate in the FC-PH protocol with its attached port(s); loopback(3) - the port may transmit frames through an internal path to verify the health of the transmitter and receiver path. Note that when the port's link state changes, its operational status (swFCPortOpStatus) will be affected." ::= { swFCPortEntry 6 }
swFCPortLinkState OBJECT-TYPE SYNTAX INTEGER { enabled (1), disabled (2), loopback (3) } MAX-ACCESS read-write STATUS current DESCRIPTION "This object indicates the link state of the port. The value may be: enabled(1) - port is allowed to participate in the FC-PH protocol with its attached port (or ports if it is in a FC-AL loop); disabled(2) - the port is not allowed to participate in the FC-PH protocol with its attached port(s); loopback(3) - the port may transmit frames through an internal path to verify the health of the transmitter and receiver path. Note that when the port's link state changes, its operational status (swFCPortOpStatus) will be affected." ::= { swFCPortEntry 6 }
| OID | Name | Sub children | Sub Nodes Total | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.1588.2.1.1.1.6.2.1.1 | swFCPortIndex | 0 | 0 | This object identifies the switch port index. Note that the value of a port index is 1 higher than the port number labeled on the… |
| 1.3.6.1.4.1.1588.2.1.1.1.6.2.1.2 | swFCPortType | 0 | 0 | This object identifies the type of switch port. It may be of type stitch(1), flannel(2) or loom(3). |
| 1.3.6.1.4.1.1588.2.1.1.1.6.2.1.3 | swFCPortPhyState | 0 | 0 | This object identifies the physical state of the port: noCard(1) no card present in this switch slot; noGbic(2) no GBIC module in … |
| 1.3.6.1.4.1.1588.2.1.1.1.6.2.1.4 | swFCPortOpStatus | 0 | 0 | This object identifies the operational status of the port. The online(1) state indicates that user frames can be passed. The unkn… |
| 1.3.6.1.4.1.1588.2.1.1.1.6.2.1.5 | swFCPortAdmStatus | 0 | 0 | The desired state of the port. A management station may place the port in a desired state by setting this object accordingly. Th… |
| 1.3.6.1.4.1.1588.2.1.1.1.6.2.1.7 | swFCPortTxType | 0 | 0 | This object indicates the media transmitter type of the port. The value may be: unknown(1) cannot determined to the port driver l… |
| 1.3.6.1.4.1.1588.2.1.1.1.6.2.1.11 | swFCPortTxWords | 0 | 0 | This object counts the number of Fibre Channel words that the port has transmitted. |
| 1.3.6.1.4.1.1588.2.1.1.1.6.2.1.12 | swFCPortRxWords | 0 | 0 | This object counts the number of Fibre Channel words that the port has received. |
| 1.3.6.1.4.1.1588.2.1.1.1.6.2.1.13 | swFCPortTxFrames | 0 | 0 | This object counts the number of (Fibre Channel) frames that the port has transmitted. |
| 1.3.6.1.4.1.1588.2.1.1.1.6.2.1.14 | swFCPortRxFrames | 0 | 0 | This object counts the number of (Fibre Channel) frames that the port has received. |
| 1.3.6.1.4.1.1588.2.1.1.1.6.2.1.15 | swFCPortTxC2Frames, swFCPortRxC2Frames | 0 | 0 | This object counts the number of Class 2 frames that the port has received. |
| 1.3.6.1.4.1.1588.2.1.1.1.6.2.1.16 | swFCPortRxC3Frames | 0 | 0 | This object counts the number of Class 3 frames that the port has received. |
| 1.3.6.1.4.1.1588.2.1.1.1.6.2.1.17 | swFCPortRxLCs | 0 | 0 | This object counts the number of Link Control frames that the port has received. |
| 1.3.6.1.4.1.1588.2.1.1.1.6.2.1.18 | swFCPortRxMcasts | 0 | 0 | This object counts the number of Multicast frames that the port has received. |
| 1.3.6.1.4.1.1588.2.1.1.1.6.2.1.19 | swFCPortTooManyRdys | 0 | 0 | This object counts the number of times when RDYs exceeds the frames received. |
| 1.3.6.1.4.1.1588.2.1.1.1.6.2.1.20 | swFCPortNoTxCredits | 0 | 0 | This object counts the number of times when the transmit credit has reached zero. |
| 1.3.6.1.4.1.1588.2.1.1.1.6.2.1.21 | swFCPortRxEncInFrs | 0 | 0 | This object counts the number of encoding error or disparity error inside frames received. |
| 1.3.6.1.4.1.1588.2.1.1.1.6.2.1.22 | swFCPortRxCrcs | 0 | 0 | This object counts the number of CRC errors detected for frames received. |
| 1.3.6.1.4.1.1588.2.1.1.1.6.2.1.23 | swFCPortRxTruncs | 0 | 0 | This object counts the number of truncated frames that the port has received. |
| 1.3.6.1.4.1.1588.2.1.1.1.6.2.1.24 | swFCPortRxTooLongs | 0 | 0 | This object counts the number of received frames that are too long. |
| 1.3.6.1.4.1.1588.2.1.1.1.6.2.1.25 | swFCPortRxBadEofs | 0 | 0 | This object counts the number of received frames that have bad EOF delimiter. |
| 1.3.6.1.4.1.1588.2.1.1.1.6.2.1.26 | swFCPortRxEncOutFrs | 0 | 0 | This object counts the number of encoding error or disparity error outside frames received. |
| 1.3.6.1.4.1.1588.2.1.1.1.6.2.1.27 | swFCPortRxBadOs | 0 | 0 | This object counts the number of invalid Ordered Sets received. |
| 1.3.6.1.4.1.1588.2.1.1.1.6.2.1.28 | swFCPortC3Discards | 0 | 0 | This object counts the number of Class 3 frames that the port has discarded. |
| 1.3.6.1.4.1.1588.2.1.1.1.6.2.1.29 | swFCPortMcastTimedOuts | 0 | 0 | This object counts the number of Multicast frames that has been timed out. |
| 1.3.6.1.4.1.1588.2.1.1.1.6.2.1.30 | swFCPortTxMcasts | 0 | 0 | This object counts the number of Multicast frames that has been transmitted. |
| 1.3.6.1.4.1.1588.2.1.1.1.6.2.1.31 | swFCPortLipIns | 0 | 0 | This object counts the number of Loop Initializations that has been initiated by loop devices attached. |
| 1.3.6.1.4.1.1588.2.1.1.1.6.2.1.32 | swFCPortLipOuts | 0 | 0 | This object counts the number of Loop Initializations that has been initiated by the port. |
| 1.3.6.1.4.1.1588.2.1.1.1.6.2.1.33 | swFCPortLipLastAlpa | 0 | 0 | This object indicates the Physical Address (AL_PA) of the loop device that initiated the last Loop Initialization. |
| 1.3.6.1.4.1.1588.2.1.1.1.6.2.1.34 | swFCPortWwn | 0 | 0 | The World_wide_Name of the Fibre Channel port. The contents of an instance are in the IEEE extended format as specified in FC-PH;… |
| 1.3.6.1.4.1.1588.2.1.1.1.6.2.1.35 | swFCPortSpeed | 0 | 0 | The desired baud rate for the port. It can have the values of 1GB (1), 2GB (2), Auto-Negotiate (3) or 4GB (4). Some of the above … |
| 1.3.6.1.4.1.1588.2.1.1.1.6.2.1.36 | swFCPortName | 0 | 0 | A string indicates the name of the addressed port. The names should be persistent across switch reboots. Port names do not have t… |
| 1.3.6.1.4.1.1588.2.1.1.1.6.2.1.37 | swFCPortSpecifier | 0 | 0 | This string indicates the physical port number of the addressed port. The format of the string is: pres… |
| 1.3.6.1.4.1.1588.2.1.1.1.6.2.1.38 | swFCPortFlag | 0 | 0 | A bit map of port status flags which includes the information of port type. Currently this will indicate if the port is vir… |
| 1.3.6.1.4.1.1588.2.1.1.1.6.2.1.39 | swFCPortBrcdType | 0 | 0 | The Brocade port type. |