Port or bundle address that the INL
terminates on. If no remote connection has
been established, then this attribute will
return zero.
Parsed from file STMIB.mib.txt
Company: None
Module: STMIB
Port or bundle address that the INL
terminates on. If no remote connection has
been established, then this attribute will
return zero.
Parsed from file STMIB.mib
Module: STMIB
Vendor: Timeplex
Module: STMIB
[Automatically extracted from oidview.com]
restINLRemotePortAddr OBJECT-TYPE SYNTAX BundleAddr ACCESS read-only STATUS mandatory DESCRIPTION "Port or bundle address that the INL terminates on. If no remote connection has been established, then this attribute will return zero." ::= { restINLEntry 9 }
restINLRemotePortAddr OBJECT-TYPE SYNTAX BundleAddr ACCESS read-only STATUS mandatory DESCRIPTION "Port or bundle address that the INL terminates on. If no remote connection has been established, then this attribute will return zero." ::= { restINLEntry 9 }
OID | Name | Sub children | Sub Nodes Total | Description |
---|---|---|---|---|
1.3.6.1.4.1.16.101.1.2.2.7.1.1 | restINLNumber | 0 | 0 | None |
1.3.6.1.4.1.16.101.1.2.2.7.1.2 | restINLAddr | 0 | 0 | None |
1.3.6.1.4.1.16.101.1.2.2.7.1.3 | restINLDiagnostics | 0 | 0 | Remove will free bus bandwidth used by the INL, and disconnect all channels connected over the INL. It will also set the INL star… |
1.3.6.1.4.1.16.101.1.2.2.7.1.4 | restINLStatus | 0 | 0 | None |
1.3.6.1.4.1.16.101.1.2.2.7.1.5 | restINLSubStatus | 0 | 0 | None |
1.3.6.1.4.1.16.101.1.2.2.7.1.6 | restINLLocalBERLevel | 0 | 0 | BER level on the local node. If the local BER quality value is notCalculatedYet, then this attribute will return zero. |
1.3.6.1.4.1.16.101.1.2.2.7.1.7 | restINLLocalBERQuality | 0 | 0 | None |
1.3.6.1.4.1.16.101.1.2.2.7.1.8 | restINLRemoteNodeID | 0 | 0 | Node number that the INL terminates on. If no remote connection has been established, then this attribute will return zero. |
1.3.6.1.4.1.16.101.1.2.2.7.1.10 | restINLRemoteINLID | 0 | 0 | INL ID on the remote node that the INL terminates on. If no remote connection has been established, then this attribute will retur… |
1.3.6.1.4.1.16.101.1.2.2.7.1.11 | restINLRemoteBERLevel | 0 | 0 | BER level on the remote node that the INL terminates on. If the remote BER quality value is notCalculatedYet, then this attribute… |
1.3.6.1.4.1.16.101.1.2.2.7.1.12 | restINLRemoteBERQuality | 0 | 0 | None |
1.3.6.1.4.1.16.101.1.2.2.7.1.13 | restINLAvailableTDMBw | 0 | 0 | None |
1.3.6.1.4.1.16.101.1.2.2.7.1.14 | restINLAvailablePacketBw | 0 | 0 | None |
1.3.6.1.4.1.16.101.1.2.2.7.1.15 | restINLLoopbackDuration | 0 | 0 | Value 65535 specifies a permanent loopback. |
1.3.6.1.4.1.16.101.1.2.2.7.1.16 | restINLLoopbackStatus | 0 | 0 | None |
1.3.6.1.4.1.16.101.1.2.2.7.1.17 | restINLTotalCRCErrors | 0 | 0 | None |
1.3.6.1.4.1.16.101.1.2.2.7.1.18 | restINLBERWindowFill | 0 | 0 | Format e.g. 10/32, 5/32. |
1.3.6.1.4.1.16.101.1.2.2.7.1.19 | restINLNumTdmCh | 0 | 0 | None |
1.3.6.1.4.1.16.101.1.2.2.7.1.20 | restINLNumFrCh | 0 | 0 | None |
1.3.6.1.4.1.16.101.1.2.2.7.1.21 | restINLSpeed | 0 | 0 | None |
1.3.6.1.4.1.16.101.1.2.2.7.1.22 | restINLNumSaf | 0 | 0 | None |
1.3.6.1.4.1.16.101.1.2.2.7.1.23 | restINLLOSMode | 0 | 0 | None |
1.3.6.1.4.1.16.101.1.2.2.7.1.24 | restINLBusFrameMode | 0 | 0 | None |