Enable/Disable LLB.
Parsed from file Rad0485.MIB.txt
Company: None
Module: RAD-MIB
Enable/Disable LLB.
Parsed from file RAD-MIB.mib
Module: RAD-MIB
Vendor: Rad Data Communications Ltd.
Module: DACS-MIB
[Automatically extracted from oidview.com]
prtExHsrLlbEnable OBJECT-TYPE SYNTAX INTEGER { notApplicable (1), disabled (2), enabled (3) } MAX-ACCESS read-write STATUS current DESCRIPTION "Enable/Disable LLB." ::= {prtExHsrCnfgEntry 16}
prtExHsrLlbEnable OBJECT-TYPE SYNTAX INTEGER { notApplicable (1), disabled (2), enabled (3) } MAX-ACCESS read-write STATUS current DESCRIPTION "Enable/Disable LLB." ::= {prtExHsrCnfgEntry 16}
OID | Name | Sub children | Sub Nodes Total | Description |
---|---|---|---|---|
1.3.6.1.4.1.164.3.2.3.2.10.1.1.1 | prtExHsrCnfgIdx | 0 | 0 | This object indicates the Idx of the Cnfg (1..100) being accessed. Idx 255 relates to the TmpCnfg |
1.3.6.1.4.1.164.3.2.3.2.10.1.1.2 | prtExHsrSltIdx | 0 | 0 | This object indicates a unique slot position where the card is inserted. |
1.3.6.1.4.1.164.3.2.3.2.10.1.1.3 | prtExHsrPrtIdx | 0 | 0 | A unique prt identifier within the card. Valid values: For MP: - For HS-R cards: exPrt1 (1) .. exPrt4 (4) - For HS-U/1 cards: inP… |
1.3.6.1.4.1.164.3.2.3.2.10.1.1.4 | prtExHsrConnect | 0 | 0 | This object indicates whether the port should be considered in any of the mux algorithms. |
1.3.6.1.4.1.164.3.2.3.2.10.1.1.5 | prtExHsrProtocol | 0 | 0 | This object indicates the protocol. |
1.3.6.1.4.1.164.3.2.3.2.10.1.1.6 | prtExHsrRate | 0 | 0 | This object indicates the port speed. The 16,32,48,56,64 and 128 kbps rates are applicable only for Sync protocol. The 57.6 and 11… |
1.3.6.1.4.1.164.3.2.3.2.10.1.1.7 | prtExHsrDataBits | 0 | 0 | Data Bits. This object is applicable for Async protocol only. |
1.3.6.1.4.1.164.3.2.3.2.10.1.1.8 | prtExHsrParity | 0 | 0 | - For HS-R card, this object indicates if the parity bit is needed or not. Therefore, the 'no' and 'yes; values are applicable. -… |
1.3.6.1.4.1.164.3.2.3.2.10.1.1.9 | prtExHsrStopBits | 0 | 0 | This object indicates the minimum number of stop bits in the tx async frame. This object is applicable for Async protocol only. |
1.3.6.1.4.1.164.3.2.3.2.10.1.1.10 | prtExHsrCts | 0 | 0 | CTS. This object is applicable for Async protocol only. |
1.3.6.1.4.1.164.3.2.3.2.10.1.1.11 | prtExHsrClkMode | 0 | 0 | Clock mode. This object is applicable for Sync protocol only. |
1.3.6.1.4.1.164.3.2.3.2.10.1.1.12 | prtExHsrLinkTo | 0 | 0 | It indicates the slot of the main link card to which the HS-R card is mapped. notApplicable - for HS-U/1 internal ports. STATUS d… |
1.3.6.1.4.1.164.3.2.3.2.10.1.1.13 | prtExHsrDcdDsr | 0 | 0 | DCD & DSR. |
1.3.6.1.4.1.164.3.2.3.2.10.1.1.14 | prtExHsrOperMode | 0 | 0 | This object indicates the operation mode of the port. normal = bi-directional (Tx/Rx) unidirectRx = unidirectional Rx. broadcast =… |
1.3.6.1.4.1.164.3.2.3.2.10.1.1.15 | prtExHsrRtsDtr | 0 | 0 | RTS & DTR. |
1.3.6.1.4.1.164.3.2.3.2.10.1.1.17 | prtExHsrRlbEnable | 0 | 0 | Enable/Disable RLB. |
1.3.6.1.4.1.164.3.2.3.2.10.1.1.18 | prtExHsrRateAdapt | 0 | 0 | Rate Adaptation - takes a low rate and adapts it to 64Kbps. This object specifies the means this adaptation is done by. |
1.3.6.1.4.1.164.3.2.3.2.10.1.1.19 | prtExHsrRemoteModem | 0 | 0 | Remote modem. asmi31s2 = ASMi-31/2 |