This controls the use of general non-correlated channel options. The value is a sum of values
(powers of two), where each value in the sum represents an option.
The values that may be included in the sum and their meanings are:
0 No options
1 RTS line checked
2 Auto call after clear
4 Auto call after
8 DCD is ON, only in DATA TRANSFER mode.
16 Charging Info Facility
32 Auto call if HW signal is set
64 Accept calls even if HW signal is is OFF
128 A transparent channel.
Parsed from file Rad0485.MIB.txt
Company: None
Module: RAD-MIB
This controls the use of general non-correlated channel options. The value is a sum of values
(powers of two), where each value in the sum represents an option.
The values that may be included in the sum and their meanings are:
0 No options
1 RTS line checked
2 Auto call after clear
4 Auto call after
8 DCD is ON, only in DATA TRANSFER mode.
16 Charging Info Facility
32 Auto call if HW signal is set
64 Accept calls even if HW signal is is OFF
128 A transparent channel.
Parsed from file RAD-MIB.mib
Module: RAD-MIB
Vendor: Rad Data Communications
Module: RAD-MIB (rad-mib.mib)
Type: TABULAR
Access: read-only
Syntax: Integer32
Automatically extracted from www.mibdepot.com
pktSwchChannelOptionsA OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "This controls the use of general non-correlated channel options. The value is a sum of values (powers of two), where each value in the sum represents an option. The values that may be included in the sum and their meanings are: 0 No options 1 RTS line checked 2 Auto call after clear 4 Auto call after
8 DCD is ON, only in DATA TRANSFER mode. 16 Charging Info Facility 32 Auto call if HW signal is set 64 Accept calls even if HW signal is is OFF 128 A transparent channel." ::= { pktSwchChannelAEntry 16 }
pktSwchChannelOptionsA OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "This controls the use of general non-correlated channel options. The value is a sum of values (powers of two), where each value in the sum represents an option. The values that may be included in the sum and their meanings are: 0 No options 1 RTS line checked 2 Auto call after clear 4 Auto call after 8 DCD is ON, only in DATA TRANSFER mode. 16 Charging Info Facility 32 Auto call if HW signal is set 64 Accept calls even if HW signal is is OFF 128 A transparent channel." ::= { pktSwchChannelAEntry 16 }
OID | Name | Sub children | Sub Nodes Total | Description |
---|---|---|---|---|
1.3.6.1.4.1.164.8.2.2.2.1.1 | pktSwchChannelIfIndexA | 0 | 0 | This is used as the index for the channel table. |
1.3.6.1.4.1.164.8.2.2.2.1.2 | pktSwchChannelNumberA | 0 | 0 | The number by which a channel is identified. |
1.3.6.1.4.1.164.8.2.2.2.1.3 | pktSwchChannelProfileA | 0 | 0 | The profile that the channel uses for command mode operations. |
1.3.6.1.4.1.164.8.2.2.2.1.4 | pktSwchChannelOutCallProfileA | 0 | 0 | The number of the profile that is used during an outgoing call on the channel. |
1.3.6.1.4.1.164.8.2.2.2.1.5 | pktSwchChannelInCallProfileA | 0 | 0 | The number of the profile that is used during an incoming call on the channel. |
1.3.6.1.4.1.164.8.2.2.2.1.6 | pktSwchChannelRemoteProfileA | 0 | 0 | The number of the profile that is downloaded to the remote PAD at the beginning of a new call. |
1.3.6.1.4.1.164.8.2.2.2.1.7 | pktSwchChannelAutocallIdA | 0 | 0 | Selects the mnemonic (call ID) to be used as the first alternative. A value of zero indicates that the autocall function is dis… |
1.3.6.1.4.1.164.8.2.2.2.1.8 | pktSwchChannelAlterAutocallIdA | 0 | 0 | Selects the alternate mnemonic for the autocall function. A value of zero indicates that the alternate destination is not used. |
1.3.6.1.4.1.164.8.2.2.2.1.9 | pktSwchChannelAutocallRetriesA | 0 | 0 | The number of autocall retrues if the autocall setup request is rejected with a busy cause. |
1.3.6.1.4.1.164.8.2.2.2.1.10 | pktSwchChannelAutocallIntervalA | 0 | 0 | The interval in seconds between consecutive autocall retries. |
1.3.6.1.4.1.164.8.2.2.2.1.11 | pktSwchChannelCallAliasA | 0 | 0 | The alias to be sent after the call is set up. A value of zero indicates that alias sending is disabled. The aliases are confi… |
1.3.6.1.4.1.164.8.2.2.2.1.12 | pktSwchChannelSubAddress1A | 0 | 0 | The first subaddress for the channel. |
1.3.6.1.4.1.164.8.2.2.2.1.13 | pktSwchChannelSubAddress2A | 0 | 0 | The second subaddress for the channel. |
1.3.6.1.4.1.164.8.2.2.2.1.14 | pktSwchChannelNUIAEntry | 0 | 0 | The number corresponding to the NUI information to be sent. This number is the same as the pktSwchNuiIndex. |
1.3.6.1.4.1.164.8.2.2.2.1.15 | pktSwchChannelClearTimerA | 0 | 0 | Time limitation for an open session. A value of zero indicates that the Clear timer is not used. |