A port characteristic which determines the type of
output device connected to the port, and therefore
determines the output data formatting used for server
configuration and statistics screens. 'ansi(1)'
indicates that ANSI-compatible screen formatting
sequences may be used. 'softcopy(2)' specifies that
VT-100 screen formatting sequences may be used.
'hardcopy(3)' indicates that no screen-formatting
sequences may be used. Note that for ports
with vPortType = 'physicalLCDPanel(5)' or vPortType =
'virtualConsole(6)' this object is not modifiable. The
agent will accept any valid value on a set-request for
such ports.
Parsed from file isolan-ts.mib.txt
Company: None
Module: BICC-TrmSvr
A port characteristic which determines the type of
output device connected to the port, and therefore
determines the output data formatting used for server
configuration and statistics screens. 'ansi(1)'
indicates that ANSI-compatible screen formatting
sequences may be used. 'softcopy(2)' specifies that
VT-100 screen formatting sequences may be used.
'hardcopy(3)' indicates that no screen-formatting
sequences may be used. Note that for ports
with vPortType = 'physicalLCDPanel(5)' or vPortType =
'virtualConsole(6)' this object is not modifiable. The
agent will accept any valid value on a set-request for
such ports.
Parsed from file BICC-TrmSvr.mib
Module: BICC-TrmSvr
Vendor: BICC
Module: BICC-TrmSvr
[Automatically extracted from oidview.com]
vPortScreenType OBJECT-TYPE SYNTAX INTEGER { ansi(1), softcopy(2), hardcopy(3) } ACCESS read-write STATUS mandatory DESCRIPTION "A port characteristic which determines the type of output device connected to the port, and therefore determines the output data formatting used for server configuration and statistics screens. 'ansi(1)' indicates that ANSI-compatible screen formatting sequences may be used. 'softcopy(2)' specifies that VT-100 screen formatting sequences may be used. 'hardcopy(3)' indicates that no screen-formatting sequences may be used. Note that for ports with vPortType = 'physicalLCDPanel(5)' or vPortType = 'virtualConsole(6)' this object is not modifiable. The agent will accept any valid value on a set-request for such ports." ::= { vPortEntry 41 }
vPortScreenType OBJECT-TYPE SYNTAX INTEGER { ansi(1), softcopy(2), hardcopy(3) } ACCESS read-write STATUS mandatory DESCRIPTION "A port characteristic which determines the type of output device connected to the port, and therefore determines the output data formatting used for server configuration and statistics screens. 'ansi(1)' indicates that ANSI-compatible screen formatting sequences may be used. 'softcopy(2)' specifies that VT-100 screen formatting sequences may be used. 'hardcopy(3)' indicates that no screen-formatting sequences may be used. Note that for ports with vPortType = 'physicalLCDPanel(5)' or vPortType = 'virtualConsole(6)' this object is not modifiable. The agent will accept any valid value on a set-request for such ports." ::= { vPortEntry 41 }
OID | Name | Sub children | Sub Nodes Total | Description |
---|---|---|---|---|
1.3.6.1.4.1.170.1.1.2.6.1.2.14.1.1 | vPortIndex | 0 | 0 | A unique value for each port. Its value ranges between 1 and the value of vPortNumber. The value for each port will remain cons… |
1.3.6.1.4.1.170.1.1.2.6.1.2.14.1.2 | vPortType | 0 | 0 | An integer indicating the type of the port. Virtual ports should be considered communication channels to their particular interf… |
1.3.6.1.4.1.170.1.1.2.6.1.2.14.1.3 | vPortName | 0 | 0 | A textual name for the port. This name is used in LAT-compatible session start requests, where a device can request to be connec… |
1.3.6.1.4.1.170.1.1.2.6.1.2.14.1.4 | vPortUserName | 0 | 0 | The textual username typed in by the user who logged into the port. |
1.3.6.1.4.1.170.1.1.2.6.1.2.14.1.5 | vPortState | 0 | 0 | The current operational state of the port. 'idle(2)' indicates that the port has no sessions and is logged out. 'local(3)' indi… |
1.3.6.1.4.1.170.1.1.2.6.1.2.14.1.6 | vPortLogout | 0 | 0 | A control to logout a port. In response to a get-request or get-next-request, the agent always returns 'ready(1)' as the value. … |
1.3.6.1.4.1.170.1.1.2.6.1.2.14.1.7 | vPortActiveSessions | 0 | 0 | The number of presently active sessions on the port, whether current or suspended. |
1.3.6.1.4.1.170.1.1.2.6.1.2.14.1.8 | vPortCurrSessNumber | 0 | 0 | The reference number of the port's current session. There is a unique non-zero reference number for each session on a port. The … |
1.3.6.1.4.1.170.1.1.2.6.1.2.14.1.9 | vPortCurrSessProt | 0 | 0 | An identifier of which higher-level protocol the current port session is running over. The possibilities are { protNone } (for n… |
1.3.6.1.4.1.170.1.1.2.6.1.2.14.1.10 | vPortAccess | 0 | 0 | An indication of the allowed types of access to the port. 'local(1)' indicates that the port can only carry sessions initiated b… |
1.3.6.1.4.1.170.1.1.2.6.1.2.14.1.11 | vPortVirtualEnable | 0 | 0 | An indication of the current setting of the port's virtual characteristic. This parameter affects the port's actions when connec… |
1.3.6.1.4.1.170.1.1.2.6.1.2.14.1.12 | vPortVirtualString | 0 | 0 | An indication of the current setting of the port's virtual text string. This parameter affects the port's actions when connectio… |
1.3.6.1.4.1.170.1.1.2.6.1.2.14.1.13 | vPortSessionLimit | 0 | 0 | The maximum number of simultaneous sessions allowed on the port. Note that for ports with vPortType = 'physicalLCDPanel(5)' or v… |
1.3.6.1.4.1.170.1.1.2.6.1.2.14.1.14 | vPortProfile | 0 | 0 | The name of the profile in use for the port. The profile contains session parameter information for Telnet and Rlogin. When the… |
1.3.6.1.4.1.170.1.1.2.6.1.2.14.1.15 | vPortQueueing | 0 | 0 | An indication of whether the LAT-compatible protocol will request session queueing when attempting to establish a session initiat… |
1.3.6.1.4.1.170.1.1.2.6.1.2.14.1.16 | vPortPasswordEnable | 0 | 0 | An indication of whether the system password must be entered to login to the port. Note that for ports with vPortType = 'physica… |
1.3.6.1.4.1.170.1.1.2.6.1.2.14.1.17 | vPortTacacsEnable | 0 | 0 | An indication of whether the username and password entered at login must be verified by a Tacacs server before port access is per… |
1.3.6.1.4.1.170.1.1.2.6.1.2.14.1.18 | vPortSecurityEnable | 0 | 0 | An indication of whether the port security feature is enabled. Ports for which security is enabled are allowed to execute only a… |
1.3.6.1.4.1.170.1.1.2.6.1.2.14.1.19 | vPortGroups | 0 | 0 | Indicates which LAT-compatible groups are authorized and currently enabled on the port. There are 256 possible LAT-compatible gr… |
1.3.6.1.4.1.170.1.1.2.6.1.2.14.1.20 | vPortBreakMode | 0 | 0 | An indication of how a BREAK is interpreted when received at the port as input. 'local(1)' indicates that a received BREAK cause… |
1.3.6.1.4.1.170.1.1.2.6.1.2.14.1.21 | vPortBackSwitch | 0 | 0 | A 'hot' key which, when received at the port's input, causes the current session to be changed to the immediately preceding sessi… |
1.3.6.1.4.1.170.1.1.2.6.1.2.14.1.22 | vPortForwSwitch | 0 | 0 | A 'hot' key which, when received at the port's input, causes the current session to be changed to the next numerical session (fro… |
1.3.6.1.4.1.170.1.1.2.6.1.2.14.1.23 | vPortLocalSwitch | 0 | 0 | A 'hot' key which, when received at the port's input, forces the port to suspend any current session and return to local mode. I… |
1.3.6.1.4.1.170.1.1.2.6.1.2.14.1.24 | vPortPrefSvc | 0 | 0 | A string defining the port's preferred service. A user at the port does not need to specify the service name (or node address) to… |
1.3.6.1.4.1.170.1.1.2.6.1.2.14.1.25 | vPortPrefNode | 0 | 0 | A string defining the node name for the port's preferred service. Multiple LAT-compatible nodes may offer the same service name.… |
1.3.6.1.4.1.170.1.1.2.6.1.2.14.1.26 | vPortPrefPort | 0 | 0 | A string defining the port name for the port's preferred service. For LAT-compatible services this string identifies the LAT-com… |
1.3.6.1.4.1.170.1.1.2.6.1.2.14.1.27 | vPortPrefMode | 0 | 0 | An indication of the mode of preferred service connection. 'preferred(2)' indicates the 'preferred' mode of connection. In this… |
1.3.6.1.4.1.170.1.1.2.6.1.2.14.1.28 | vPortAutoConnect | 0 | 0 | A port characteristic which, when enabled, causes the port to automatically attempt to re-establish any connection which is abnor… |
1.3.6.1.4.1.170.1.1.2.6.1.2.14.1.29 | vPortPrompt | 0 | 0 | The prompt string for the port when it is in local mode. Note for ports with vPortType = 'physicalLCDPanel(5)' or vPortType = 'v… |
1.3.6.1.4.1.170.1.1.2.6.1.2.14.1.30 | vPortInactiveLogout | 0 | 0 | A port characteristic which, when enabled, causes the port to automatically become logged out if it has no active sessions and no… |
1.3.6.1.4.1.170.1.1.2.6.1.2.14.1.31 | vPortAutoPrompt | 0 | 0 | A port characteristic which, when enabled, causes the LAT-compatible service prompt to appear at the port immediately upon connec… |
1.3.6.1.4.1.170.1.1.2.6.1.2.14.1.32 | vPortBroadcastEnable | 0 | 0 | A port characteristic which, when enabled, allows characters broadcast from other server ports to appear at the port. If disable… |
1.3.6.1.4.1.170.1.1.2.6.1.2.14.1.33 | vPortInterrupts | 0 | 0 | A port characteristic which, when enabled, allows a remote connection to the port to be interrupted by a local user by means of t… |
1.3.6.1.4.1.170.1.1.2.6.1.2.14.1.34 | vPortMessageCodes | 0 | 0 | A port characteristic which, when enabled, causes a message code reference number to be generated along with any port status or e… |
1.3.6.1.4.1.170.1.1.2.6.1.2.14.1.35 | vPortVerification | 0 | 0 | A port characteristic which, when enabled, causes a status message to appear on each connection attempt by the port. The status … |
1.3.6.1.4.1.170.1.1.2.6.1.2.14.1.36 | vPortDialup | 0 | 0 | A port characteristic which, when enabled, causes the server to identify that the port is configured for modem dial-in service wh… |
1.3.6.1.4.1.170.1.1.2.6.1.2.14.1.37 | vPortRemoteModify | 0 | 0 | A port characteristic which, when enabled, causes the server to allow modification of local port parameters (speed, character siz… |
1.3.6.1.4.1.170.1.1.2.6.1.2.14.1.38 | vPortAbsoluteLogout | 0 | 0 | A port characteristic which, when enabled, causes the port to automatically become logged out if no data has been received or tra… |
1.3.6.1.4.1.170.1.1.2.6.1.2.14.1.39 | vPortIOflush | 0 | 0 | A port characteristic which, when enabled, causes the server to automatically flush the port's output buffer when the port become… |
1.3.6.1.4.1.170.1.1.2.6.1.2.14.1.40 | vPortLogoutMsgEnable | 0 | 0 | A port characteristic which, when enabled, causes the port to print a message whenever it becomes logged out. Note for ports with… |
1.3.6.1.4.1.170.1.1.2.6.1.2.14.1.42 | vPortFlowType | 0 | 0 | The port's type of flow control. 'none(1)' indicates that no flow control is in effect. 'xonXoff(2)' indicates software flow co… |
1.3.6.1.4.1.170.1.1.2.6.1.2.14.1.43 | vPortInFlowState | 0 | 0 | The current operational state of input flow control on the port. 'none' indicates not applicable. 'unknown' indicates this leve… |
1.3.6.1.4.1.170.1.1.2.6.1.2.14.1.44 | vPortOutFlowState | 0 | 0 | The current operational state of output flow control on the port. 'none' indicates not applicable. 'unknown' indicates this lev… |
1.3.6.1.4.1.170.1.1.2.6.1.2.14.1.45 | vPortCTSstate | 0 | 0 | The current state of the port's CLEAR-TO-SEND input. 'none(1)' indicates that the port has no CTS input. 'unknown(4)' indicates t… |
1.3.6.1.4.1.170.1.1.2.6.1.2.14.1.46 | vPortDSRstate | 0 | 0 | The current state of the port's DATA-SET-READY input. 'none(1)' indicates that the port has no DSR input. 'unknown(4)' indicates … |
1.3.6.1.4.1.170.1.1.2.6.1.2.14.1.47 | vPortDCDstate | 0 | 0 | The current state of the port's DATA-CARRIER-DETECT input. 'none(1)' indicates that the port has no DCD input. 'unknown(4)' ind… |
1.3.6.1.4.1.170.1.1.2.6.1.2.14.1.48 | vPortDTRstate | 0 | 0 | The current state of the port's DATA-TERMINAL-READY output. 'none(1)' indicates that the port has no DTR output. 'unknown(4)' i… |
1.3.6.1.4.1.170.1.1.2.6.1.2.14.1.49 | vPortRIstate | 0 | 0 | The current state of the port's RING-INDICATOR input. 'none(1)' indicates that the port has no RI input. 'unknown(4)' indicates… |
1.3.6.1.4.1.170.1.1.2.6.1.2.14.1.50 | vPortRTSstate | 0 | 0 | The current state of the port's REQUEST-TO-SEND output. 'none(1)' indicates that the port has no RTS output. 'unknown(4)' indic… |
1.3.6.1.4.1.170.1.1.2.6.1.2.14.1.51 | vPortSpeed | 0 | 0 | The serial baud rate of the port. 'none(1)' indicates that the port is not a physical serial port. The agent will accept any va… |
1.3.6.1.4.1.170.1.1.2.6.1.2.14.1.52 | vPortCharSize | 0 | 0 | The size of serial characters transmitted/received at the port, excluding parity and stop bits. 'none(1)' indicates that the por… |
1.3.6.1.4.1.170.1.1.2.6.1.2.14.1.53 | vPortParityType | 0 | 0 | The type of parity used for serial transmission and reception of characters at the port. 'not-applicable(1)' indicates that the … |
1.3.6.1.4.1.170.1.1.2.6.1.2.14.1.54 | vPortAutobaud | 0 | 0 | Indicates whether the port will automatically attempt to autobaud to an external serial device after being logged out. 'not-appl… |
1.3.6.1.4.1.170.1.1.2.6.1.2.14.1.55 | vPortModemControl | 0 | 0 | Indicates whether the port modem control characteristic is enabled. When enabled, a physical serial port will not function unles… |
1.3.6.1.4.1.170.1.1.2.6.1.2.14.1.56 | vPortDSRlogout | 0 | 0 | Indicates whether the port DSRlogout characteristic is enabled. When enabled, a physical serial port will automatically be logge… |
1.3.6.1.4.1.170.1.1.2.6.1.2.14.1.57 | vPortRing | 0 | 0 | Indicates whether the port ring characteristic is enabled. When enabled, a physical serial port will raise and lower its RTS out… |
1.3.6.1.4.1.170.1.1.2.6.1.2.14.1.58 | vPortDTRwait | 0 | 0 | Indicates whether the port DTRwait characteristic is enabled. When enabled, a physical serial port will delay asserting its DTR … |
1.3.6.1.4.1.170.1.1.2.6.1.2.14.1.59 | vPortSignalCheckEnable | 0 | 0 | Indicates whether the port signal check characteristic is enabled. When enabled, a physical serial port will check for the asser… |
1.3.6.1.4.1.170.1.1.2.6.1.2.14.1.60 | vPortHandshake | 0 | 0 | On some server units the physical serial ports have connectors which do not allow both the CTS and RI input signals. This object… |
1.3.6.1.4.1.170.1.1.2.6.1.2.14.1.61 | vPortRcvChars | 0 | 0 | Total number of characters detected as input from the port since system re-initialization, including locally-processed input, and… |
1.3.6.1.4.1.170.1.1.2.6.1.2.14.1.62 | vPortTrnChars | 0 | 0 | Total number of characters detected as output from the port since system re-initialization, including locally-creating output, an… |
1.3.6.1.4.1.170.1.1.2.6.1.2.14.1.63 | vPortFrameErrs | 0 | 0 | Total number of received characters which were rejected because a framing error was detected. This counter only applies to physi… |
1.3.6.1.4.1.170.1.1.2.6.1.2.14.1.64 | vPortOverrunErrs | 0 | 0 | Total number of received characters which were rejected for lack of character FIFO space on the serial communication controller. … |
1.3.6.1.4.1.170.1.1.2.6.1.2.14.1.65 | vPortParityErrs | 0 | 0 | Total number of received characters which were rejected because a parity error was detected. This counter only applies to physic… |
1.3.6.1.4.1.170.1.1.2.6.1.2.14.1.66 | vPortCharsDropped | 0 | 0 | Total number of received characters which were rejected for any reason not covered in other objects, for example lack of input bu… |