This object defines the speed of the X25 port. The speed may
only be set to one of a series of reasonable values, and if an attempt
is made to set the speed to a value which is within the valid range
but not equal to one of these values, the speed will be rounded up.
If the connector type of the port is RS232, the port could be a
standard port or a high speed port. If the port is a high speed
RS232 port, the maximum valid speed is 256000. If the port is a
standard RS232 port, the maximum valid speed is 64000 on the
FRX4000/SS1840 and 19200 on all other products. It may be possible
to set the speed of a standard RS232 port to a speed which is valid
for a high speed RS232 port but invalid for a standard RS232 port.
In this case, the port may not end up having the invalid speed.
The default speed for a standard RS232 port on the FRX6000 is 19200.
Parsed from file netlink-specific-mib.txt
Company: None
Module: NETLINK-SPECIFIC-MIB
This object defines the speed of the X25 port. The speed may
only be set to one of a series of reasonable values, and if an attempt
is made to set the speed to a value which is within the valid range
but not equal to one of these values, the speed will be rounded up.
If the connector type of the port is RS232, the port could be a
standard port or a high speed port. If the port is a high speed
RS232 port, the maximum valid speed is 256000. If the port is a
standard RS232 port, the maximum valid speed is 64000 on the
FRX4000/SS1840 and 19200 on all other products. It may be possible
to set the speed of a standard RS232 port to a speed which is valid
for a high speed RS232 port but invalid for a standard RS232 port.
In this case, the port may not end up having the invalid speed.
The default speed for a standard RS232 port on the FRX6000 is 19200.
Parsed from file NETLINK-SPECIFIC-MIB.mib
Module: NETLINK-SPECIFIC-MIB
Vendor: Cabletron
Module: NETLINK-SPECIFIC-MIB (netlink-mib)
Type: TABULAR
Access: read-write
Syntax: INTEGER
Automatically extracted from www.mibdepot.com
portPhyX25AdminSpeed OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "This object defines the speed of the X25 port. The speed may only be set to one of a series of reasonable values, and if an attempt is made to set the speed to a value which is within the valid range but not equal to one of these values, the speed will be rounded up. If the connector type of the port is RS232, the port could be a standard port or a high speed port. If the port is a high speed RS232 port, the maximum valid speed is 256000. If the port is a standard RS232 port, the maximum valid speed is 64000 on the FRX4000/SS1840 and 19200 on all other products. It may be possible to set the speed of a standard RS232 port to a speed which is valid for a high speed RS232 port but invalid for a standard RS232 port. In this case, the port may not end up having the invalid speed. The default speed for a standard RS232 port on the FRX6000 is 19200." DEFVAL { 64000 } ::= { portPhyX25AdminEntry 2 }
portPhyX25AdminSpeed OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "This object defines the speed of the X25 port. The speed may only be set to one of a series of reasonable values, and if an attempt is made to set the speed to a value which is within the valid range but not equal to one of these values, the speed will be rounded up. If the connector type of the port is RS232, the port could be a standard port or a high speed port. If the port is a high speed RS232 port, the maximum valid speed is 256000. If the port is a standard RS232 port, the maximum valid speed is 64000 on the FRX4000/SS1840 and 19200 on all other products. It may be possible to set the speed of a standard RS232 port to a speed which is valid for a high speed RS232 port but invalid for a standard RS232 port. In this case, the port may not end up having the invalid speed. The default speed for a standard RS232 port on the FRX6000 is 19200." DEFVAL { 64000 } ::= { portPhyX25AdminEntry 2 }
OID | Name | Sub children | Sub Nodes Total | Description |
---|---|---|---|---|
1.3.6.1.4.1.173.7.3.1.1.1.1 | portPhyX25AdminConnector | 0 | 0 | Physical port interface connector type. |
1.3.6.1.4.1.173.7.3.1.1.1.3 | portPhyX25AdminGenerateClock | 0 | 0 | Specifies whether the port will generate the clock necessary to synchronize traffic over the link. |
1.3.6.1.4.1.173.7.3.1.1.1.4 | portPhyX25AdminRcvClockFromDTE | 0 | 0 | This object defines whether the receive clock will be used from the DTE. |
1.3.6.1.4.1.173.7.3.1.1.1.5 | portPhyX25AdminDialOut | 0 | 0 | This flag indicates whether the port is connected to a dial modem, and whethter connections will be initiated through dial-in or … |
1.3.6.1.4.1.173.7.3.1.1.1.6 | portPhyX25AdminInactivityTimer | 0 | 0 | This timer defines in minutes, the period of inactivity allowed between calls. Once the timer expires, the port is disabled until… |
1.3.6.1.4.1.173.7.3.1.1.1.7 | portPhyX25AdminDisconnectTimer | 0 | 0 | This timer defines, in seconds, the length of time a dial-in port will remain disabled after expiration of the InActivity Timer. |
1.3.6.1.4.1.173.7.3.1.1.1.8 | portPhyX25AdminSetupTimer | 0 | 0 | This timer determines the length of time, in seconds, that a response must be received by the port, after entering the Linkup st… |
1.3.6.1.4.1.173.7.3.1.1.1.9 | portPhyX25AdminTrunkFlag | 0 | 0 | This flag, when set, indicates the port is associated with a network trunk group. It will be disabled/enabled if the network tru… |
1.3.6.1.4.1.173.7.3.1.1.1.10 | portPhyX25AdminTrunkGroup | 0 | 0 | This variable contains a string of 8 bytes, with each byte indicating 8 ports on an RLP that may be a part of a trunk group. Sinc… |
1.3.6.1.4.1.173.7.3.1.1.1.11 | portPhyX25AdminRowStatus | 0 | 0 | This variable is used to manage the creation and deletion of conceptual rows in the portPhyX25AdminTable and follows the SNMPv2 R… |