Specifies whether the port will generate the clock
necessary to synchronize traffic over the link.
Parsed from file netlink-specific-mib.txt
Company: None
Module: NETLINK-SPECIFIC-MIB
Specifies whether the port will generate the clock
necessary to synchronize traffic over the link.
Parsed from file NETLINK-SPECIFIC-MIB.mib
Module: NETLINK-SPECIFIC-MIB
Vendor: Cabletron
Module: NETLINK-SPECIFIC-MIB (netlink-mib)
Type: TABULAR
Access: read-write
Syntax: INTEGER
Automatically extracted from www.mibdepot.com
portPhyX25AdminGenerateClock OBJECT-TYPE SYNTAX INTEGER { no (1), yes (2) } ACCESS read-write STATUS mandatory DESCRIPTION "Specifies whether the port will generate the clock necessary to synchronize traffic over the link." DEFVAL { no } ::= { portPhyX25AdminEntry 3 }
portPhyX25AdminGenerateClock OBJECT-TYPE SYNTAX INTEGER { no (1), yes (2) } ACCESS read-write STATUS mandatory DESCRIPTION "Specifies whether the port will generate the clock necessary to synchronize traffic over the link." DEFVAL { no } ::= { portPhyX25AdminEntry 3 }
OID | Name | Sub children | Sub Nodes Total | Description |
---|---|---|---|---|
1.3.6.1.4.1.173.7.3.1.1.1.1 | portPhyX25AdminConnector | 0 | 0 | Physical port interface connector type. |
1.3.6.1.4.1.173.7.3.1.1.1.2 | portPhyX25AdminSpeed | 0 | 0 | This object defines the speed of the X25 port. The speed may only be set to one of a series of reasonable values, and if an att… |
1.3.6.1.4.1.173.7.3.1.1.1.4 | portPhyX25AdminRcvClockFromDTE | 0 | 0 | This object defines whether the receive clock will be used from the DTE. |
1.3.6.1.4.1.173.7.3.1.1.1.5 | portPhyX25AdminDialOut | 0 | 0 | This flag indicates whether the port is connected to a dial modem, and whethter connections will be initiated through dial-in or … |
1.3.6.1.4.1.173.7.3.1.1.1.6 | portPhyX25AdminInactivityTimer | 0 | 0 | This timer defines in minutes, the period of inactivity allowed between calls. Once the timer expires, the port is disabled until… |
1.3.6.1.4.1.173.7.3.1.1.1.7 | portPhyX25AdminDisconnectTimer | 0 | 0 | This timer defines, in seconds, the length of time a dial-in port will remain disabled after expiration of the InActivity Timer. |
1.3.6.1.4.1.173.7.3.1.1.1.8 | portPhyX25AdminSetupTimer | 0 | 0 | This timer determines the length of time, in seconds, that a response must be received by the port, after entering the Linkup st… |
1.3.6.1.4.1.173.7.3.1.1.1.9 | portPhyX25AdminTrunkFlag | 0 | 0 | This flag, when set, indicates the port is associated with a network trunk group. It will be disabled/enabled if the network tru… |
1.3.6.1.4.1.173.7.3.1.1.1.10 | portPhyX25AdminTrunkGroup | 0 | 0 | This variable contains a string of 8 bytes, with each byte indicating 8 ports on an RLP that may be a part of a trunk group. Sinc… |
1.3.6.1.4.1.173.7.3.1.1.1.11 | portPhyX25AdminRowStatus | 0 | 0 | This variable is used to manage the creation and deletion of conceptual rows in the portPhyX25AdminTable and follows the SNMPv2 R… |