reachDSLSpectrumMgmtLoopMeasurementMethod OBJECT-TYPE
SYNTAX INTEGER {
none (1),
loopLength (2),
ewl (3),
quadMode (4)
}
MAX-ACCESS read-only
DESCRIPTION
"This object has been deprecated. The corresponding object in the new pdn_spectrumMgmt.mib should be used instead.
This object indicates the measurement method used in describing the Loop Length of a circuit. Following are the details of each of the options:
none(1) - Indicates that the Spectral Compliance is NOT dependant on any Loop Length measurements or configurations.
loopLength(2) - The 'ConfLoopLength' object is used to determine spectral compliance. The 'ConfEWL' & 'ConfQuadMode' objects are not used in this mode.
ewl(3) - The 'ConfEWL' object is used to configure the estimated loop length, which is used to determine spectral compliance. In this mode the 'ConfLoopLength' & 'ConfQuadMode' objects are not used.
quadMode(4) - The 'ConfQuadMode' object is used to determine spectral compliance. The 'ConfEWL' & 'ConfLoopLength' objects are not used in this mode.
This object determines which of the three objects : 'ConfEWL', 'ConfLoopLength' or 'ConfQuadMode' is used (if any) to enforce spectrally compliant maximum 'Tx Rates' and the maximum allowed 'Tx Power' on a given circuit."
View at oid-info.com
This object has been deprecated. The corresponding
object in the new pdn_spectrumMgmt.mib should be used
instead.
This object indicates the measurement method used in
describing the Loop Length of a circuit. Following are the
details of each of the options:
none(1) - Indicates that the Spectral Compliance
is NOT dependant on any Loop Length
measurements or configurations.
loopLength(2) - The 'ConfLoopLength' object is used to
determine spectral compliance. The
'ConfEWL' & 'ConfQuadMode' objects are
not used in this mode.
ewl(3) - The 'ConfEWL' object is used to
configure the estimated loop length,
which is used to determine spectral
compliance. In this mode the
'ConfLoopLength' & 'ConfQuadMode'
objects are not used.
quadMode(4) - The 'ConfQuadMode' object is used to
determine spectral compliance. The
'ConfEWL' & 'ConfLoopLength' objects
are not used in this mode.
This object determines which of the three objects :
'ConfEWL', 'ConfLoopLength' or 'ConfQuadMode' is used
(if any) to enforce spectrally compliant maximum
'Tx Rates' and the maximum allowed 'Tx Power' on a given
circuit.
Parsed from file pdn_reachDSL.mib.txt
Company: paradyne
Module: PDN-REACHDSL-MIB
reachDSLSpectrumMgmtLoopMeasurementMethod OBJECT-TYPE SYNTAX INTEGER { none(1), loopLength(2), ewl(3), quadMode(4) } MAX-ACCESS read-only STATUS current DESCRIPTION "This object has been deprecated. The corresponding object in the new pdn_spectrumMgmt.mib should be used instead. This object indicates the measurement method used in describing the Loop Length of a circuit. Following are the details of each of the options: none(1) - Indicates that the Spectral Compliance is NOT dependant on any Loop Length measurements or configurations. loopLength(2) - The 'ConfLoopLength' object is used to determine spectral compliance. The 'ConfEWL' & 'ConfQuadMode' objects are not used in this mode. ewl(3) - The 'ConfEWL' object is used to configure the estimated loop length, which is used to determine spectral compliance. In this mode the 'ConfLoopLength' & 'ConfQuadMode' objects are not used. quadMode(4) - The 'ConfQuadMode' object is used to determine spectral compliance. The 'ConfEWL' & 'ConfLoopLength' objects are not used in this mode. This object determines which of the three objects : 'ConfEWL', 'ConfLoopLength' or 'ConfQuadMode' is used (if any) to enforce spectrally compliant maximum 'Tx Rates' and the maximum allowed 'Tx Power' on a given circuit." ::= { pdnReachDSLObjects 6 }
| OID | Name | Sub children | Sub Nodes Total | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.1795.2.24.2.6.20.1.6.0 | reachDSLSpectrumMgmtLoopMeasurementMethod | 0 | 0 | None |
| OID | Name | Sub children | Sub Nodes Total | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.1795.2.24.2.6.20.1.1 | reachDSLSpectrumMgmtSelection | 1 | 1 | This object has been deprecated. The corresponding object in the new pdn_spectrumMgmt.mib should be used instead. This object is … |
| 1.3.6.1.4.1.1795.2.24.2.6.20.1.2 | reachDSLSpectrumMgmtZone | 1 | 1 | This object shows the geographic location or the spectrum zone used for spectrum management. It also represents which Spectrum M… |
| 1.3.6.1.4.1.1795.2.24.2.6.20.1.3 | reachDSLSpectrumMgmtConfTable | 1 | 6 | reachDSLSpectrumMgmtConftable |
| 1.3.6.1.4.1.1795.2.24.2.6.20.1.4 | reachDSLSpectrumMgmtLineInfoTable | 1 | 9 | This object has been deprecated. The corresponding object in the new pdn_spectrumMgmt.mib should be used instead. The ReachDSL Spe… |
| 1.3.6.1.4.1.1795.2.24.2.6.20.1.5 | reachDSLLineTable | 1 | 3 | The ReachDSL Line Table. |
| 1.3.6.1.4.1.1795.2.24.2.6.20.1.7 | reachDSLSpectrumMgmtEWLUnits | 1 | 1 | This object has been deprecated. The corresponding object in the new pdn_spectrumMgmt.mib should be used instead. This object indi… |
| 1.3.6.1.4.1.1795.2.24.2.6.20.1.8 | reachDSLSpectrumMgmtMode | 1 | 1 | This object has been deprecated. The corresponding object in the new pdn_spectrumMgmt.mib should be used instead. This object rest… |