The units to be used in the determination of threshold
exceptions. Absolute means that when the value object reaches
one of the three thresholds, an exception is generated.
PerSecond means that when the value/second reaches one of the
three threshold values, an exception is generated.
Parsed from file sta.mib.txt
Company: None
Module: Wellfleet-STA-MIB
The units to be used in the determination of threshold
exceptions. Absolute means that when the value object reaches
one of the three thresholds, an exception is generated.
PerSecond means that when the value/second reaches one of the
three threshold values, an exception is generated.
Parsed from file Wellfleet-STA-MIB.mib
Module: Wellfleet-STA-MIB
Vendor: Wellfleet
Module: Wellfleet-STA-MIB
[Automatically extracted from oidview.com]
wfStaThresholdUnits OBJECT-TYPE SYNTAX INTEGER { absolute(1), persecond(2) } ACCESS read-write STATUS mandatory DESCRIPTION "The units to be used in the determination of threshold exceptions. Absolute means that when the value object reaches one of the three thresholds, an exception is generated. PerSecond means that when the value/second reaches one of the three threshold values, an exception is generated." DEFVAL { persecond } ::= { wfStaThresholdEntry 12 }
wfStaThresholdUnits OBJECT-TYPE SYNTAX INTEGER { absolute(1), persecond(2) } ACCESS read-write STATUS mandatory DESCRIPTION "The units to be used in the determination of threshold exceptions. Absolute means that when the value object reaches one of the three thresholds, an exception is generated. PerSecond means that when the value/second reaches one of the three threshold values, an exception is generated." DEFVAL { persecond } ::= { wfStaThresholdEntry 12 }
OID | Name | Sub children | Sub Nodes Total | Description |
---|---|---|---|---|
1.3.6.1.4.1.18.3.3.2.6.2.1.1 | wfStaThresholdDelete | 0 | 0 | The row (object) deletion attribute for this threshold |
1.3.6.1.4.1.18.3.3.2.6.2.1.2 | wfStaThresholdDisable | 0 | 0 | The enable/disable attribute for this threshold. Setting this attribute to disabled, causes the threshold to be ignored in subseq… |
1.3.6.1.4.1.18.3.3.2.6.2.1.3 | wfStaThresholdState | 0 | 0 | The state of this threshold. An invalid state means that the object could not be retrieved from the mib. A held state indicates … |
1.3.6.1.4.1.18.3.3.2.6.2.1.4 | wfStaThresholdObject | 0 | 0 | The identifier of the mib object to examine for threshold exceptions. |
1.3.6.1.4.1.18.3.3.2.6.2.1.5 | wfStaThresholdLowValue | 0 | 0 | The mark for low threshold exceptions |
1.3.6.1.4.1.18.3.3.2.6.2.1.6 | wfStaThresholdLowEventLevel | 0 | 0 | The severity level of the event log message (alarm) to be generated on low exception |
1.3.6.1.4.1.18.3.3.2.6.2.1.7 | wfStaThresholdMediumValue | 0 | 0 | The mark for medium threshold exceptions |
1.3.6.1.4.1.18.3.3.2.6.2.1.8 | wfStaThresholdMediumEventLevel | 0 | 0 | The severity level of the event log message (alarm) to be generated on medium exception |
1.3.6.1.4.1.18.3.3.2.6.2.1.9 | wfStaThresholdHighValue | 0 | 0 | The mark for high threshold exceptions |
1.3.6.1.4.1.18.3.3.2.6.2.1.10 | wfStaThresholdHighEventLevel | 0 | 0 | The severity level of the event log message (alarm) to be generated on high exception |
1.3.6.1.4.1.18.3.3.2.6.2.1.11 | wfStaThresholdCurrentValue | 0 | 0 | The most recently computed threshold value for the polled object. |
1.3.6.1.4.1.18.3.3.2.6.2.1.13 | wfStaThresholdAction | 0 | 0 | How the threshold should be evaluated with respect to the threshold marks |
1.3.6.1.4.1.18.3.3.2.6.2.1.14 | wfStaThresholdMaxSuccessiveAlarms | 0 | 0 | The maximum number of successive alarms that can be generated for this object before it enters a HELD state. A successive alarms… |
1.3.6.1.4.1.18.3.3.2.6.2.1.15 | wfStaThresholdHoldDownIntervals | 0 | 0 | The number of exception free polling intervals which an object in a held state must pass before transitioning to a valid state. |
1.3.6.1.4.1.18.3.3.2.6.2.1.16 | wfStaThresholdLowExceptions | 0 | 0 | The number of low threshold exceptions. |
1.3.6.1.4.1.18.3.3.2.6.2.1.17 | wfStaThresholdLowAlarms | 0 | 0 | The number of low threshold alarms. |
1.3.6.1.4.1.18.3.3.2.6.2.1.18 | wfStaThresholdMediumExceptions | 0 | 0 | The number of medium threshold exceptions. |
1.3.6.1.4.1.18.3.3.2.6.2.1.19 | wfStaThresholdMediumAlarms | 0 | 0 | The number of medium threshold alarms. |
1.3.6.1.4.1.18.3.3.2.6.2.1.20 | wfStaThresholdHighExceptions | 0 | 0 | The number of high threshold exceptions. |
1.3.6.1.4.1.18.3.3.2.6.2.1.21 | wfStaThresholdHighAlarms | 0 | 0 | The number of high threshold alarms. |
1.3.6.1.4.1.18.3.3.2.6.2.1.22 | wfStaThresholdLabel | 0 | 0 | The threshold lable string configurable by user. The string would be returned in the trap and will show in the log as string wfSy… |