Number of LLC frames received whose length exceeded the MTU.
Parsed from file fddi.mib.txt
Company: None
Module: Wellfleet-FDDI-MIB
Number of LLC frames received whose length exceeded the MTU.
Parsed from file Wellfleet-FDDI-MIB.mib
Module: Wellfleet-FDDI-MIB
Vendor: Wellfleet
Module: Wellfleet-FDDI-MIB
[Automatically extracted from oidview.com]
wfFDDIRxOversizedFrames OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "Number of LLC frames received whose length exceeded the MTU." ::= { wfFddiEntry 47 }
wfFDDIRxOversizedFrames OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "Number of LLC frames received whose length exceeded the MTU." ::= { wfFddiEntry 47 }
OID | Name | Sub children | Sub Nodes Total | Description |
---|---|---|---|---|
1.3.6.1.4.1.18.3.4.4.1.1 | wfFDDIDelete | 0 | 0 | Create/delete parameter, default = create. |
1.3.6.1.4.1.18.3.4.4.1.2 | wfFDDIEnable | 0 | 0 | Enable/disable parameter, default = enable. |
1.3.6.1.4.1.18.3.4.4.1.3 | wfFDDIState | 0 | 0 | Line driver state variable, not present, init, down, up. |
1.3.6.1.4.1.18.3.4.4.1.4 | wfFDDISlot | 0 | 0 | Instance ID slot - filled in by driver. |
1.3.6.1.4.1.18.3.4.4.1.5 | wfFDDINode | 0 | 0 | Instance ID node - filled in by driver. For the ASN this attribute is an encoded value and is equal to 'module'*10 + 'node'. Wher… |
1.3.6.1.4.1.18.3.4.4.1.6 | wfFDDICct | 0 | 0 | Cct number for this line instance. |
1.3.6.1.4.1.18.3.4.4.1.7 | wfFDDIBofl | 0 | 0 | The Breath-Of-Life (BOFL) function, when enabled, will disable the LLC interface when the FDDI becomes non-operational (i.e., lin… |
1.3.6.1.4.1.18.3.4.4.1.8 | wfFDDIBoflTmo | 0 | 0 | Specifies the time value (in seconds) of the BOFL timer. The BOFL timer will be set to the value of this attribute when the foll… |
1.3.6.1.4.1.18.3.4.4.1.9 | wfFDDIMtu | 0 | 0 | The MTU is the maximum allowed frame length on the wire, excluding frame delimiters (i.e. preamble, ending delimiter). The MTU of… |
1.3.6.1.4.1.18.3.4.4.1.10 | wfFDDIMadr | 0 | 0 | PROM-based MAC address, fixed - line driver fills in. |
1.3.6.1.4.1.18.3.4.4.1.11 | wfFDDIOctetsRxOk | 0 | 0 | Number of bytes received without error. This byte count only includes LLC frames (i.e. no MAC and SMT frames). |
1.3.6.1.4.1.18.3.4.4.1.12 | wfFDDIFramesRxOk | 0 | 0 | Number of frames received without error. This frame count only includes LLC frames (i.e. no MAC and SMT frames). |
1.3.6.1.4.1.18.3.4.4.1.13 | wfFDDIOctetsTxOk | 0 | 0 | Number of bytes transmitted without error. This byte count only includes LLC and SMT frames (i.e. no MAC frames). |
1.3.6.1.4.1.18.3.4.4.1.14 | wfFDDIFramesTxOk | 0 | 0 | Number of frames transmitted without error. This frame count only includes LLC and SMT frames (i.e. no MAC frames ). |
1.3.6.1.4.1.18.3.4.4.1.15 | wfFDDICrcErrRx | 0 | 0 | Number of frames received with CRC errors. |
1.3.6.1.4.1.18.3.4.4.1.16 | wfFDDIOverrunRx | 0 | 0 | Number of frames received with internal overrun errors. |
1.3.6.1.4.1.18.3.4.4.1.17 | wfFDDIParityErrRx | 0 | 0 | Number of frames received with parity errors. |
1.3.6.1.4.1.18.3.4.4.1.18 | wfFDDIMacErrRx | 0 | 0 | Number of frames received with MAC errors. |
1.3.6.1.4.1.18.3.4.4.1.19 | wfFDDIRingErrRx | 0 | 0 | Number of receive ring error events. |
1.3.6.1.4.1.18.3.4.4.1.20 | wfFDDISmtRingErrRx | 0 | 0 | Number of SMT receive ring error events. |
1.3.6.1.4.1.18.3.4.4.1.21 | wfFDDIRingOverrunRx | 0 | 0 | Number of LLC receive ring overrun events. |
1.3.6.1.4.1.18.3.4.4.1.22 | wfFDDISmtRingOverrunRx | 0 | 0 | Number of SMT receive ring overrun events. |
1.3.6.1.4.1.18.3.4.4.1.23 | wfFDDIAbortTx | 0 | 0 | Number of transmit frames with internal abort errors. |
1.3.6.1.4.1.18.3.4.4.1.24 | wfFDDIUnderrunTx | 0 | 0 | Number of transmit frames aborted with underrun errors. |
1.3.6.1.4.1.18.3.4.4.1.25 | wfFDDIParityErrTx | 0 | 0 | Number of transmit frames aborted with parity errors. |
1.3.6.1.4.1.18.3.4.4.1.26 | wfFDDIRingErrTx | 0 | 0 | Number of LLC/SMT transmit ring error events. |
1.3.6.1.4.1.18.3.4.4.1.27 | wfFDDIPortOpErr | 0 | 0 | Number of port operation error events. |
1.3.6.1.4.1.18.3.4.4.1.28 | wfFDDIInternOpErr | 0 | 0 | Number of internal operation error events. |
1.3.6.1.4.1.18.3.4.4.1.29 | wfFDDIHostErr | 0 | 0 | Number of host error events. |
1.3.6.1.4.1.18.3.4.4.1.30 | wfFDDISmtConnectionPolicy | 0 | 0 | A value that indicates the connection policies enforced at the station. A station sets the corresponding policy for each of the c… |
1.3.6.1.4.1.18.3.4.4.1.31 | wfFDDISmtTNotify | 0 | 0 | The timer used in the Neighbor Notification protocol, reported in seconds and ranging from 2 to 30 seconds. |
1.3.6.1.4.1.18.3.4.4.1.32 | wfFDDIMacTReq | 0 | 0 | Specifies the maximum time value of 'wfFddiPathMaxTReq' that shall be used by any MAC that is configured in this path. The operat… |
1.3.6.1.4.1.18.3.4.4.1.33 | wfFDDIMacTMax | 0 | 0 | The requested maximum TTRT to be supported by a MAC represented in unsigned integer specifying time in octet units (80 nanosecon… |
1.3.6.1.4.1.18.3.4.4.1.34 | wfFDDIMacTvxValue | 0 | 0 | The requested value of TvxValue represented in unsigned integer specifying time in octet units (80 nanoseconds). |
1.3.6.1.4.1.18.3.4.4.1.35 | wfFDDIMacTMin | 0 | 0 | The requested minimum TTRT to be requested by a MAC represented in unsigned integer specifying time in octet units (80 nanosecon… |
1.3.6.1.4.1.18.3.4.4.1.36 | wfFDDIHardwareFilter | 0 | 0 | Hardware filter (CAM) parameter. |
1.3.6.1.4.1.18.3.4.4.1.37 | wfFDDISmtEnable | 0 | 0 | Enable Station Management periodic timer and NIF protocol. |
1.3.6.1.4.1.18.3.4.4.1.38 | wfFDDITxQueueLength | 0 | 0 | Current Transmit Queue Length |
1.3.6.1.4.1.18.3.4.4.1.39 | wfFDDIRxQueueLength | 0 | 0 | Current Receive Queue Length |
1.3.6.1.4.1.18.3.4.4.1.40 | wfFDDITxClipFrames | 0 | 0 | Number of frames clipped in driver's transmit routine due to transmit congestion. |
1.3.6.1.4.1.18.3.4.4.1.41 | wfFDDIRxReplenMisses | 0 | 0 | Number of packet buffer misses while attempting to replenish driver receive ring. |
1.3.6.1.4.1.18.3.4.4.1.42 | wfFDDICfgTxQueueLength | 0 | 0 | Configured Transmit Queue Length. Values other than zero over-ride the router selected values. A value of zero has a special mea… |
1.3.6.1.4.1.18.3.4.4.1.43 | wfFDDICfgRxQueueLength | 0 | 0 | Configured Receive Queue Length. Values other than zero over-ride the router selected values. A value of zero has a special mean… |
1.3.6.1.4.1.18.3.4.4.1.44 | wfFDDILineNumber | 0 | 0 | Logical line number associated with this driver entity. |
1.3.6.1.4.1.18.3.4.4.1.45 | wfFDDIForcePeerTree | 0 | 0 | This attribute allows all FDDI Peer/Tree connections to reach the 'Thru' state. This is done to give the user some flexibility an… |
1.3.6.1.4.1.18.3.4.4.1.46 | wfFDDIInvalidFrameStatusRx | 0 | 0 | A count of the number of badly formed frames received off of the FDDI ring. These are frames which do not contain a valid Frame S… |
1.3.6.1.4.1.18.3.4.4.1.48 | wfFDDIRxSmtOversizedFrames | 0 | 0 | Number of SMT frames received whose length exceeded the MTU. |
1.3.6.1.4.1.18.3.4.4.1.49 | wfFDDIRxUndersizedFrames | 0 | 0 | Number of LLC frames received whose length was less than 20 bytes including the FC byte and a 4 byte CRC. |
1.3.6.1.4.1.18.3.4.4.1.50 | wfFDDIRxSmtUndersizedFrames | 0 | 0 | Number of SMT frames received whose length was less than 37 bytes including the FC byte and a 4 byte CRC. |
1.3.6.1.4.1.18.3.4.4.1.51 | wfFDDIModule | 0 | 0 | Module number for ASN platform, filled in by driver. For non-ASN platforms this attribute will not be used. |
1.3.6.1.4.1.18.3.4.4.1.52 | wfFDDIActualNode | 0 | 0 | Actual Node number for ASN platform, filled in by driver. For non-ASN platforms, this attribute will not be used. |
1.3.6.1.4.1.18.3.4.4.1.53 | wfFDDILastChange | 0 | 0 | The value of SysUpTime at the time the interface entered it's current operational state (UP state). SysUpTime is defined as the… |
1.3.6.1.4.1.18.3.4.4.1.54 | wfFDDIOutQLen | 0 | 0 | The instantaneous current length of the output packet queue (in packets). |
1.3.6.1.4.1.18.3.4.4.1.55 | wfFDDIRxSmtOctets | 0 | 0 | Number of bytes received without error. This byte count only includes SMT frames (i.e. no MAC and LLC frames). |
1.3.6.1.4.1.18.3.4.4.1.56 | wfFDDIRxSmtFrames | 0 | 0 | Number of frames received without error. This frame count only includes SMT frames (i.e. no MAC and LLC frames). |
1.3.6.1.4.1.18.3.4.4.1.57 | wfFDDIIntProcessings | 0 | 0 | Counts the number of times the interrupt service routine has been called |
1.3.6.1.4.1.18.3.4.4.1.58 | wfFDDITxProcessings | 0 | 0 | Counts the number of times the transmit routine fsi_xmt_oper_act(), has been called |
1.3.6.1.4.1.18.3.4.4.1.59 | wfFDDIRxProcessings | 0 | 0 | Counts the number of times RINT processing takes place in the interrupt service routine. |
1.3.6.1.4.1.18.3.4.4.1.60 | wfFDDITxRNRProcessings | 0 | 0 | Counts the number of times the transmit complete routine fsi_xmt_cmpl(), has been called |
1.3.6.1.4.1.18.3.4.4.1.61 | wfFDDISmtRxProcessings | 0 | 0 | Counts the number of time RINT was processing was performed on the SMT receive ring. |
1.3.6.1.4.1.18.3.4.4.1.62 | wfFDDIPhyALogPtr | 0 | 0 | Address of the Debug Phy Event Buffer for Phy A. This attribute is strictly for diagnostic purposes. The size of the buffer is 10… |
1.3.6.1.4.1.18.3.4.4.1.63 | wfFDDIPhyBLogPtr | 0 | 0 | Address of the Debug Phy Event Buffer for Phy B. This attribute is strictly for diagnostic purposes. The size of the buffer is 10… |
1.3.6.1.4.1.18.3.4.4.1.64 | wfFDDIPromiscuous | 0 | 0 | For now this attribute is used only in BNX code !!! The promiscuous parameter allows address filtering based on the destination M… |
1.3.6.1.4.1.18.3.4.4.1.65 | wfFDDILLCFrameControl | 0 | 0 | Frame control used for LLC frames, using synchronous frames for reserved priority traffic when specified. |
1.3.6.1.4.1.18.3.4.4.1.66 | wfFDDITurboBofl | 0 | 0 | DEBUG parameter - Turbo bofl enabled or disabled, by adjusting BoflNum and BoflLen bofl packets can be made to fill the links ava… |
1.3.6.1.4.1.18.3.4.4.1.67 | wfFDDIBoflNum | 0 | 0 | DEBUG parameter - Number of breath of life packets per breath of life |
1.3.6.1.4.1.18.3.4.4.1.68 | wfFDDIBoflLen | 0 | 0 | DEBUG parameter - breath of life packet length |